| Cam Controls |
| The series LOCON
and ROTARNOCK have been adapted to the current market requirements by creating
new models. We were especially inspired by the implementation of Fieldbus
connection combined with modern operating configuration concepts. The today's
products are configurable as desired by the customer. |
|
 |
 |
 |
 |
| Locon |
The classic concept of separate control and actual value
acquisition.
The Locon range offers different basic units with the tasks of the central
actual value acquisition, communication with the periphery, voltage supply and
some other administrative matters. In addition, different expansion modules are
available for increase performance. |
|
| Rotarnock |
The intelligent solution: Cam control and actual value
acquisition combined.
The Rotarnock range offers different solutions including rotary encoder, cam
control and Profbus-connection in one housing.
The high-end models provides you with free software configuration. The Rotarnock
series is already economical by nature:
Wiring effort is reduced since no additional rotary encoder needs to be wired
up.
|
|
| TERM |
| The TERM range offers compact control, display and
operation units. |
|
| Speedy |
Fast switching. To reduce switching delay time SPEEDY
makes it possible to overexcite the magnetic field by a short duration
over-voltage pulse of 100V, adjustable from 1ms to 10ms and consequently to
overcome faster the mechanical inertia. SPEEDY features different switch modes
that can be adjusted externally.
|
|
Fieldbus Gateways
Fieldbuses set the tasks - Deutschmann solves the problems! |
| With our Gateways
your products can be enabled for Fieldbuses in no time. All UNIGATE Gateways
(except for UNIGATE RS) can be programmed by the customer through a Script
language. By means of the free PC-tool «Protocol Developer» you can generate
your Script very quickly. |
|
 |
 |
 |
 |
| Unigate IC |
| Complete Fieldbus- or Ethernet-Gateays in IC-design
(DIL32). For a new development the development engineer only has to to take the
PINOUT of the UNIGATE IC into consideration or include it into the product in
the course of a redesign. Yet the device features an integrated Fieldbus- or
Ethernet-interface with only a little development effort involved. |
|
| Unigate SC: DIN-rail module |
| From serial interface to the desired Fieldbus or Ethernet
version. Available with the interfaces RS232 and RS485 or RS232 and RS422. The
communication between the serial side and the bus is «controlled» via a Script.
The Script is generated by means of the free PC-tool Protocol Developer, either
by the customer himself or by Deutschmann Automation as service. |
|
| Unigate CL: DIN-rail module |
| In a special compact design. From serial interface to the
desired Fieldbus or Ethernet version. The interfaces RS232, RS485 and RS232 are
generally on board. The communication between the serial side and the bus is
«controlled» via a Script. The Script is generated through the free PC-tool
Protocol Developer, either by the customer himself or by Deutschmann Automation
as service. |
|
| Unigate FB |
Our Fieldbus-Fieldbus- or Fieldbus-Ethernet-modules in
DIN-rail housing.
All versions between the buses:
- CANopen
- DeviceNet
- Ethernet
- Interbus
- Profibus DP
- LONWorks
are available. |
|
Industrial
Ethernet-Gateways
Fieldbuses set the tasks - Deutschmann solves the problems! |
| With our Gateways
your products are capable for Fieldbuses in no time. All UNIGATE Gateways
(except for UNIGATE RS) can be programmed by the customer through a Script
language. By means of the free PC-tool «Protocol Developer» you can generate
your Script very quickly. |
|
 |
 |
 |
 |
| Router |
An EPL-Router connects two networks on IP-level. It
requires two IEEE802.3 (Ethernet) compliant network accesses. One of it is
responsible for the connection to the conventional Ethernet-based IP-network,
the other one is the access to the Ethernet Powerlink (EPL-) segment. On the
EPL-side the EPL-Router acts like any other EPL-node and has the
EPL-specification for a controlled node (CN).
The NAT-Routing can be set through any web browser via an integrated HTML-side.
A simple MN function for start-up tests is available on the EPL-side. |
|
| Unigate IC |
| Complete Fieldbus- or Ethernet-Gateays in IC-design
(DIL32). For a new development the development engineer only has to to take the
PINOUT of the UNIGATE IC into consideration or include it into the product in
the course of a redesign. Yet the device features an integrated Fieldbus- or
Ethernet-interface with only a little development effort involved. |
|
| Unigate SC: DIN-rail module |
From serial interface to the desired Fieldbus or Ethernet
version. Available with the interfaces RS232 and RS485 or RS232 and RS422. The
communication between the serial side and the bus is «controlled» via a Script.
The Script is generated by means of the free PC-tool Protocol Developer, either
by the customer himself or by Deutschmann Automation as service.
|
|
| Unigate RS: DIN-rail module |
From serial interface to the desired Fieldbus or Ethernet
version. Available with the interfaces RS232 and RS485 or RS232 and RS422. For
the communication between the serial side and the bus, the commercially
available protocols, such as
Modbus ASCII
Modbus RTU (Master and Slave)
RK512
3964R
Universal 232-protocol
and more
are implemented. They are configured via the free configuration software
WINGATE. |
|
G 
