| Profile Range 8 (a
few examples) |
| ALUTOP Aluminium
Profile Range 8 is suited for applications in constructions with normal to high
carrying capacities. All profiles have a longitudinal slot to allow the
universal use of all Series 8 sliding blocks. |
|
 |
 |
 |
 |
 |
| Profile 8 30x30 |
| Profile for light and cost-effective constructions. The
8mm wide longitudinal grooves allow standard sliding blocks (except for sliding
blocks with ridge, heavy) to be inserted. |
|
| Profile R40/80 90° |
| Profile for cross-struts, covering caps, tables or other
decorative visible surfaces. For corresponding system modules see Accessories
Range 8. |
|
| Profile 80x80 |
| Profile for general constructions. The large, closed
cavity is suited as compressed air piping. For corresponding system modules see
Accessories Range 8. |
|
| Clamping profile 32x18 |
| Light-weight frame profile for surface elements up to
maximum 10 mm thickness, often used for covering caps and light sliding doors.
Surfaces to a thickness under 10 mm require friction springs to be used. |
|
| Profile 160x80 |
| Profile for general constructions. The large, closed
cavity is suited as compressed air piping. For corresponding system modules see
Accessories Range 8. |
|
| Accessories 8 (a few
examples) |
|
 |
 |
 |
 |
 |
| Connection set |
| Non-positive profile connector. Assembly is simple,
involving little outlay (boring into one of the connecting profiles). The
profiles can be variably set and can also be inserted retrospectively into
existing constructions. |
|
| Angle set |
| Angle for non-positive reinforcement of profile
connections and for attaching components to profile constructions. When
assembling surfaces the groove ledgers can be broken off. |
|
| Foot 80 |
| The height of this module can be variably adjusted. Tilt
correction for use on uneven surfaces. It can be assembled directly into the
core boring of the profile, depending on the size of the thread, or in
combination with a plate. |
|
| Guide roller 125 |
| Ball-mounted guide roller without locking device for
movable constructions such as tables or test equipment on wheels. Attachment
preferably directly into the core boring of the profile or in combination with a
foot plate. |
|
| Handle 117 PA |
| Handle, for general application. Attachment from the
front. |
|
| Profile Range 5 and |
| ALUTOP Profile
Range 5 is suited for cost-efficient applications with relatively low carrying
capacities. All profiles have a longitudinal slot to allow the universal use of
all Series 5 sliding blocks. |
|
 |
 |
 |
 |
 |
| Profile 5 20x20 |
| Profile for general, compact and cost-effective
constructions. Can be combined with Range 8. |
|
| Profile 5 R20 90° |
| Round profile for covering caps, tables and shelving
parts. |
|
| Profile 5 40x10 |
| Flat profile for handles, edge strips and various
attachments. For corresponding system modules see Accessories Range 5. |
|
| Profile 5 40x40 |
| Profile for general, compact and cost-effective
constructions. Can be combined with Range 8. The closed cavity can function as
compressed air piping. |
|
| Profile 5 80x20 |
| Profile for general, compact and cost-effective
constructions. Can be combined with Range 8. The closed cavity can function as
compressed air piping. |
|
A 
