|
Tube Connecting System
The tube connecting system was the father to the
thought “Connect without drilling and welding”. For more than 30 years, the
system has continuously been extended and adjusted to the requirements.
Due to an all-embracing clamping principle, the RK connection systems enable
a fast assembly of individual tube constructions. Its variety of styles
makes the systems to be an interesting and cost-effective alternative to
conventional welded connections.
|
|
|
|
RK-LightDesign – the clever plastic series
The plastic series with the intelligent, reducing bushing
design. Its chemical resistance makes this series interesting for
laboratories and applications in the food- and packaging industries.
|
 |
Tube connection systems made of steel/stainless steel –
the tough system
The tube connection system for outdoor conditions,
thermal loads, chemistry, foodstuff technology, medicine, etc.
Most modern production systems allow cost-effective mass production and
constant, high quality.
|
|
Tube connection systems made of aluminium – the original
The perfect tube connecting system in the new
RKIndustrieDesign. Its enormous variety of variants and sizes is unique in
the market. Completely new but still familiar.
|
|
Tube connection system ET – extended range of tolerance
Tube connection system ET – extended range of tolerance
With the ET series with its extended range of tolerances for the clamping
diameter it will also be possible to use tubes customary in trade. Safe
clamping of the tubes is achieved by two oppositely directed clamping
wedges.
|
|
|
|
quad® connection system – stability in a timeless
appearance.
The cuboid-shaped and anodized connecting elements are
made of aluminum extrusion press profiles and are characterized by the
highest load-bearing capacity and timeless appearance.
|
|
ITAS – System of industrial stairs and platforms
ITAS consists of a variety of internal clamping elements
for tubes and special aluminium profiles for the working platform area. The
system can be assembled without any pre-treatment.
|
|
Linear-units for the tubular system – concentration on
basic facts
Designed for adjusting- and positioning tasks, these
connecting elements serve as carriages and fixation elements for the linear
units E and EP.
|
|
|
|
|
|
BLOCAN®- Profile System – the assembly system without
necessary processing
Connecting without treating the ends – cut to length
and assemble! For this, the unique modular system of construction profiles
has been developed.
Due to clever connection elements you do not need any machines and special
equipment. The profiles are cut to length and assembled. More than 110
different profile sizes and cross sections can be assembled in this manner.
|
|
|
|
M-BLOCAN
The aluminium profiles of this series with 20 mm edge
length and 6 mm slot width have small dimensions and are quickly assembled
Adaptors to the profile assembly system offer ideal combination
possibilities.
|
|
BLOCAN® - Profile assembly system
Different profile shapes and dimensions allow for the
best possible adaptation to technical and economic prevailing conditions.
The BLOCAN® profile sets individual accents of function and appearance. An
extended range of practical accessories completes the modular system
appreciated in industry.
|
|
G-Profile – Function meets design
The new G-profiles purport to be gracious rectangular
tubes and give your creative ideas all possibilities to be put into
practice. Stability and functionality are integrated in the profiles and
remain invisible in their environment.
|
|
Heavy duty profiles
The relation between strength and own weight makes this
series interesting for applications which could only be realised with
large-dimensioned steel profiles until now. Due to highly-efficient shapes
and optimised wall thicknesses they are now more than equal to steel
systems. The patented pressure connector facilitates the assembly and
reduces the design and assembly costs.
|
|
|
|
Protective and separating system
For barriers, access protection or simply only as visual
cover. With pre-produced modular elements or according to individual
requirements. As powder coated steel construction or anodized aluminum
profile technology. Standardized but customized.
|
|
|
|
|
|
|
|
|
|
Linear units
There is nearly no area within the fields of
automation and machine construction where linear units are not used. It
starts with simple positioning tasks which are possibly very seldom used and
ends with highly complex multiple systems of high accuracy and with high
dynamics. Each task is different. And each task shall contain the
technically experienced solution under consideration of economic aspects.
Diversity for the best solution
The wide selection of RK linear units has been developed referring to
different customer applications. The solution which was called a “Special
application” last year is now a standard module for an attractive price and
fast availability. This increases the chance that an RK linear unit is
already available for your specific application.
Competency and experience
Linear units belong to the products that need the most advisory assistance
because their layout depends on the task and the investment framework. To
find out the type and size of the best suitable linear unit is a challenge
we would like to take up. Our specialists are best skilled, competent, and
have a wealth of experience which our customers rate highly.
Task specific solutions
What would a linear unit be without its wide selection of suitable
accessories? So the following also applies: From the simplest positioning by
hand wheel to the dynamics controlled by servomotor using high performance
control technologies and sensors.
|
|
|
|
Linear spindle units
The linear spindle units feature high longitudinal load
bearing capacity. Tapered thread spindles with self inhibition as well as
ball-type linear drives of high precision are provided for the appropriate
positioning tasks.
|
|
Timing belt - linear units
Dynamic tasks can nearly be solved without them.
Toothed-belt linear units are fast and intended for inversion mode with
short cycle times. The timing belts HD- and GT- quality reach highest
precision when used for positioning jobs.
|
|
Toothed rack - linear units
In case of long strokes, spindles and timing belts cannot
be utilized efficiently. This is the situation where the toothed rack
accomplishes its purpose. Maximal 50 metres can be realized without lower
accuracy.
|
|
Sliding and rolling guide
These linear units which are not driven are the ideal
supplement for the driven units, e.g. if a supporting axle is required due
to an eccentric load.
|
|
|
|
Heavy duty linear unit D-Line
Heavy loads have only be moved by linear axes made of
steel components until now. The high dead weight, however, must often be
moved too. This is unfavorable for the dynamics and the necessary motor
size.
D-Line combines dynamics and the loading capacity with low dead weight and
sounds the bell for a new generation in the filed of automation.
|
|
Controls and motors
There is also a choice of positioning controls and motors
as addition to the program of linear units and this forms the basis for the
development of complete system solutions
|
|
|
|
|
|
|
|
Drive technology
Do you need a drive motor, a linear adjustment unit,
limit switches for end stops and a comfortable control unit for your
application? Then, this range of RK-drive technology could be interesting
for you.
All function included
That is why, all the important functions and safety precautions are included
in the compact products of the RK drive technology. Powerful electric
cylinders provide for linear movements with their motor driven pistons.
Stable lifting columns additionally take over control functions and do not
need any covering because of their attractive profile surface.
The product series called MultiControl is easy to install and to operate.
Possible Savings
The idea of the system of the drive technology is simple: It means, it is
better to combine all components, e.g. motor, guide, limit switches, and
control, to get a compact and complete solution and not to gather and
install them individually.
In this way, you will possibly be able to resolve your problems for only a
fraction of the usual cost.
|
|
|
|
Drives
Efficient drives, not only for the positioning of RK
linear units. Mechanical adaptations and individual control facilities are
taken for granted.
From hand switch -remote operation to the integration in your PLC-System.
|
|
Lifting columns
Lifting columns combine linear drives and stable guidance
in one unit. The typical fields of application are workplaces and office
desks where continuous height adjustment according to ergonomic aspects is
required.
The positioning of units, conveyor belts and production facilities using RK
lifting column is also common in the industry.
|
|
Electric cylinders
They are not only alternatives or supplements to
pneumatic and hydraulic actuators. With the constant speed of the piston and
the possibility of continuous setting the cylinders enable the realization
of many a solution at reasonable costs
|
|
Control units
Control centre and power unit in one housing. All
connections can be plugged and are easy to install. Their exact adaptation
to the RK drive modules guarantees a safe and effective operation.
|
|
|
C 
