|
INDUCTIVE SENSORS
Inductive sensors only detect metal parts. They are
thus insensitive to dirt. Contrinex inductive sensors are particularly
suited to tough environmental conditions.
|
|
|
|
Miniature
High sensing density
- Sizes from diameter 3 mm to M5
- Rectangular models
- Increased and long operating distances
- Protection functions built in
|
 |
Up To 4x operating distances
Long Distances, large Tolerances
- Up to 4x standard operating distances
- High temperature stability
- Ideal for objects difficult to detect (small, thin, wires, etc.)
- Sizes from diameter 4 mm to M30
|
|
Analog output
Continuous information
- Large sensing range from 0...4 mm (M8, embeddable) to 0...40 mm (M30,
non-embeddable)
- Exceptional resolution
- High temperature stability
|
|
(Almost) indestructible
Reduced downtimes
- Mechanically and chemically rugged
- 3x standard distances on steel & non-ferrous metals
- Pressure resistant up to 100 bar
- IP68 & IP69K
|
|
|
|
High -Pressure resistant
For highly dynamic pressure systems
- For extremely dynamic pressure requirements
- Operating pressures up to 500 bar (peaks 1000 bar)
- Sealing of sensing face better than IP68, gastight
- All-metal housing version also available
|
|
High-temperature resistant
For Use in hot areas
- For permanent operating temperatures of up to 230 °C
- Good long-term reliability, even under difficult operating conditions
- Sizes M8 to M50, embeddable & non-embeddable
|
|
Economical
Maximum Price/performance ratio
- Sizes from diameter 3 mm to M30
- 2-wire DC and AC/DC models
- High quality at attractive prices
- For standard applications
|
|
|
|
|
|
PHOTOELECTRIC SENSORS
Photoelectric sensors work with light, which results
in long operating distances. They detect conducting and non-conducting
materials, and are best suited for adaption to specific applications.
|
|
|
|
Miniature
High sensing density
- Sizes diameter 4 mm and M5
- Diffuse and through-beam sensors
- Protection functions built in
|
|
Cylindrical light beam
Precise detection through holes & gaps
- Diameter 4 mm, M5 and
5 x 7 x 40 mm
- Cylindrical light beam
diameter < 4 mm
- Operating distance: 10, 20, 50 or 90 mm
- Protection functions built in
|
|
Fiber-optic solutions
For places difficult to access
- Small fiber-optic amplifiers (30 x 60 x 10 mm) for DIN-rail mounting
- T each-in models with digital display and devices with potentiometer
setting
- Extensive selection of optical fibers
|
|
Analog output
Continuous information
- Sensing range of 10...100 mm
- Excellent resolution
- High temperature stability
- Sizes 30 x 30 x 15 mm and M12
|
|
|
|
Background suppression
Color-independent detection
- Large sensing range with background suppression across the whole setting
range
- Operating distance independent of target color
- Glass and plastic window
- Protection degree IP67
|
|
LASER
High -precision detection
- Diffuse (M18) and through-beam sensors (M12 & M18)
- Adjustable focus (diffuse sensor)
- Detection of very small objects (down to 0.1 mm)
|
|
Color distinction
For minimal color differences
- 3 teachable color channels with independent outputs
- Detection virtually independent of target distance
- 5 tolerance levels
- High switching frequency of up to 4 kHz
|
|
Economical
Maximum Price/performance ratio
- Standard size 50 x 50 x 18 mm
- High quality at attractive prices
- Diffuse, through-beam and reflex sensors
|
|
|
|
More Products
|
|
|
|
ULTRASONIC SENSORS
Ultrasonic sensors may be used wherever distances have to
be measured in air. They detect transparent as well as colored targets in
the solid, liquid, granular or powder state.
|
|
CAPACITIVE SENSORS
Capacitive sensors are suitable for applications where
non-conducting, transparent objects have to be detected, or where a clear
difference in dielectric properties exclusively distainguishes the target
from its background.
|
|
RFID
RFID (Radio Frequency IDentification) allows objects to
be identified by means of electronic labels (transponders or tags).
Contrinex all-metal RFID systems are particularly suitable for tough
environmental conditions.
|
|
SAFETY
Safety light curtains are used wherever risks cannot be
eliminated through machine design. A person or any part of the body entering
a danger zone is detected by the light curtain, leading to immediate machine
stoppage.
|
|
|
|
CONNECTIVITY
Contrinex offers cable-distribution systems, as well as
quick-lock, sealed metal and standard connectors.
|
|
Sensor mounting clamps
– For cylindrical sensors from Ø 3 mm to M30
– Some types feature a limit stop. This
allows sensors to be exchanged
without the need for readjustment
|
|
Sensor tester
For fast field checks of various sensor types (inductive, capacitive,
photoelectric and ultrasonic) with supply voltage of 10 ... 30 V
|
|
|
I 
