|
Automation
|
 |
Control concepts for automationThe
modularization of machinery is state of the art nowadays, and is based on
the decentralization of the system’s intelligence
Baumüller is a full-range provider in the automation of decentralized,
centralized and hybrid control architectures, whatever the application.
|
|
|
|
Baumüller Automation Solutions
The Baumüller Group offers complete automation solutions
for mechanical engineering. Our broad spectrum extends from components to
integrated automation solutions, and our comprehensive services support you
throughout the lifecycle of your machine.
|
 |
Control concept b maXX-controllerPLC
The b maXX-controllerPLC is the consistent link between
the standard high performance PLC and the highly dynamic Motion Control PLC.
|
|
|
|
Control concept b maXX-drivePLC
With a typical cycle time of 100 microseconds for 1000
lines of STL, the b maXX-drivePLC is one of the world’s fastest PLCs in a
drive and is therefore suitable for both comprehensive control tasks and
demanding Motion Control tasks.
|
|
Control concepts b maXX-softPLC
The b maXX-softPLC integrates automation tasks in the PC.
Complex control tasks and automation requirements in large systems are easy
to implement with the b maXX-softPLC.
|
|
|
|
Field bus systems
Many different bus systems have established themselves in
the field of industrial communication. Baumüller drive technology supports
the six most popular field bus systems EtherCAT®, Sercos®, Ethernet, CANopen,
CANsync and Profibus®.
|
|
b maXX HMI
User orientation and operator convenience are
characteristic of Baumüller operating and display products. All terminals in
the HMI series are programmed using the same b maXX HMI Programmer
programming tool.
|
|
|
|
I/O - Modules
Baumüller I/O components provide users with a wide range
of modules for adapting to requirements in the best possible way.
|
|
|
|
|
|
Drive electronics
|
 |
The new drive concept from Baumüller – b maXX 4000
modular – scalable – open.
Baumüller is setting standards with b maXX, its newest generation of drive.
This series of converters and controllers was developed to meet current and
future automation technology requirements worldwide. b maXX serves as a
basis for both simple and complex automation solutions.
|
|
|
|
b maXX 4000 - modular servo controller up to 300 kW
b maXX has up to 11 drawers for plug-in modules and can
therefore be individually adapted for special automation tasks. Special
plug-in modules interface b maXX, including interface adaptors for most
standard bus systems. The plug-in b maXX-drivePLC module provides integrated
intelligent control.
|
|
Function and option modules for b maXX 4400
With 20 function and option modules b maXX can easily be
adopted in line with the individual tasks of the drive and automation
solution.
|
|
|
|
The control unit b maXX-drivePLC
With a typical cycle time of 100 microseconds for 1,000
lines of STL, b maXX-drivePLC is one of the fastest in-drive PLCs in the
world and is therefore ideally suitable not only for sophisticated control
tasks but also for demanding motion control tasks.
|
|
New approach for power modules
Five cooling concepts for seven frame sizes allow you to
select the optimal power modules for your requirements. To enhance
diagnostics capability, the power modules are coupled with the drive
controller via internal, serial communication.
|
|
|
|
b maXX 4100 – Rectifier and regenerative feedback unit
It is often the case with electrical drives that energy
costs make up almost 90% of the overall life-cycle costs. With this in mind,
regenerative systems help to reduce the total cost of ownership
|
|
b maXX 3000 - Servo controller up to 10 kW
The servo inverter b maXX 3400 was designed for low power
ratings up to 10 kW. With the new series of dynamic DSD servomotors in frame
sizes 28 to 100 and the linear motors, Baumüller offers a complete system
for low power ratings for all applications.
|
|
|
|
b maXX 1000 - Frequency converter
The b maXX 1000 is a frequency converter that provides
for the highly efficient (vector) control of standard motors in three output
gradations and in the power range 0.2 kW to 11 kW.
|
|
WinBASS II: Operation and parameterization of b maXX
WinBASS II is a tool that simplifies the commissioning,
parameterization and operation of all b maXX controllers - for newcomers and
advanced users.
|
|
|
|
sizemaXX - Drive configuration made easy ********
Baumüller developed a new software for drive
dimensioning. The user can dimension up to six drives with sizemaXX.Users
who are looking for new drives for their machines can access a helpful tool
at www.baumueller.de, where sizemaXX is available in the download area.
|
|
Energy efficient drive systems
Baumüller is placing increasing value on energy-efficient
drives and the consideration of their lifecycle costs. Its servo motors and
converters have for many years been rated as both meeting and exceeding the
criteria of the highest efficiency class, EFF1.
|
|
|
|
Motors and servo drives
|
 |
Baumüller offers a
wide range of servo motors and servo drives. From linear drives and disc
motors up to dynamic servo motors, servo drives and powerful High-Torque
Motors.
|
|
|
|
DSD - Dynamic servo motors
The six installation sizes for the DSD-range of Baumüller
offer a suitable solution for almost every application in the automation.
The servo motors for highly dynamic applications with the highest
requirements of acceleration capacity and the best start-stop qualities.
|
|
DS/DA - General purpose servo motors
With a shaft height from 45 to 280 Baumüller offers the
largest product range of synchronous and asynchronous motors. The servo
motor for dynamic applications with highest requirements of energy
efficiency.
|
|
|
|
DSC - Compact servo motors
With its new DSC servo motors, Baumüller is making the
torque motorservo-ready. This series focuses on improving ratings in order
to achieve a higher torque density while also drastically reducing the
volume of the device.
|
|
DST Powerful high torque motors
Baumüller offers the DST-range up to 13500 Nm torque and
herewith provides the maximum dynamic in the direct drive technology. The
high-torque synchronous motors for application with maximum torque
requirements.
|
|
|
|
DSL - Three-Phase Synchronous Linear Actuator
With its two variants the DSL 56 ensures optimal linear
motions. As a roller screw assembly for high forces and high velocities or
as a ball screw assembly in simple applications for low-cost linear drives.
|
|
DSD-IPG Three-Phase Synchronous Geared Motor
The geared motor from Baumüller, the DSD-IPG, is
distinguished by its high torque and excellent dynamic response qualities.
Thanks to the integrated planetary gearing, the DSD IPG is ideal for high
torque applications that require a high dynamic response.
|
|
|
|
BPx - Baumüller Planetary Gearing Range
In connection with our standard DS/DSD servo drives, the
BPx – planetary gear range is optimally suitable for applications that
require maximum standards of torque and dynamics.
|
|
Linear motors
The know-how used to develop and manufacture rotary
motors has been applied by Baumüller to linear motors.
|
|
|
|
Disc motors
The main strength of these motors are that they are small
and compact. In its shortest design, motor type GDM 12 N, only 39,5 mm of
axial space is required.
|
|
sizemaXX - Drive configuration made easy ********
Baumüller developed a new software for drive
dimensioning. The user can dimension up to six drives with sizemaXX.Users
who are looking for new drives for their machines can access a helpful tool
at www.baumueller.de, where sizemaXX is available in the download are
|
|
|
|
Energy efficient drive systems
Baumüller is placing increasing value on energy-efficient
drives and the consideration of their lifecycle costs. Its servo motors and
converters have for many years been rated as both meeting and exceeding the
criteria of the highest efficiency class, EFF1.
|
|
|
|
|
|
Software
|
 |
Parameterization, programming and software for
drive dimensioning
An engineering tool that guarantees continuous software compatibility is
available for programming the three control concepts with PROPROGwt II in
accordance with the IEC 61131 standard, whereby it does not matter which
hardware the application was originally developed for.
Baumüller developed a new software for drive dimensioning. The user can
dimension up to six drives with sizemaXX
|
|
|
|
sizemaXX - Drive configuration made easy
Baumüller developed a new software for drive
dimensioning. The user can dimension up to six drives with sizemaXX.Users
who are looking for new drives for their machines can access a helpful tool
at www.baumueller.de, where sizemaXX is available in the download area.
|
|
Engineering Framework ProMaster
Due to their flexible and modular construction, modern
automation solutions contain an ever-increasing amount of software. This
increases the complexity of the entire machine. To keep the programming
expenditure of the user as low as possible, however, Baumüller has developed
the ProMaster Engineering Framework.
|
|
|
|
PROPROGwtII
The powerful PROPROGwt II tool is available for
programming in accordance with IEC 61131. Support for multi-resourcing in
PROPROGwt II puts the user in a position to also handle complex projects
with a large number of decentralized controls.
|
|
|
|
|
G 
