with Polyga® humidity measuring element for the measurement of relative air humidity and temperature - for rooms and air channels.

(T)FG80H with resistance output up to 10k ohms
(T)FG80J with current or voltage output

for measuring relative air humidity and temperature with Polyga® humidity measuring element  room version

(T)FG120H with resistance output
(T)FG120 with current or voltage output

for measuring relative air humidity and temperature with Polyga® humidity measuring element channel version module

for measuring relative humidity and temperature with capacitive Mela® sensing element for use in air-conditioning systems, building management systems and ventilation technology different models

for the measurement of humidity and temperature
with calibrated sensor chip calHT
ouput: 0-1 V or digital (similar to I²C)
with filter oder protective basket
or as miniature rod shaped sensor, 12 mm

for measuring relative humidity and temperature with capacitive Mela® sensing element with current or voltage output duct version

for measuring relative humidity and temperature with capacitive Mela® sensing element with current or voltage output room version

for humidity and temperature measurement with calibrated dModul
dynamic Mela® humidity sensing element
output of hx values
equipped for on-site calibration using buttons and LEDs
easy to install

for humidity and temperature measurement with calibrated dModul
dynamic Mela® humidity sensing element
output of hx values
equipped for on-site calibration using buttons and LEDs
easy to install

room version
for humidity and temperature measurement with calibrated dModul
dynamic Mela® humidity sensing element
easy to install

for measuring relative humidity and temperature with capacitive Mela® humidity sensing element with current or voltage output rod-shaped sensor  

for measuring relative humidity and temperature with capacitive Mela® humidity sensing element with current or voltage output meteorological design

for measuring relative humidity and temperature with capacitve Mela® humidity sensing element
with current or voltage output rod-shaped sensor
with plug-in connection

for measuring relative humidity and temperature
with Mela® sensing element
with RS232 output
rod shaped sensor with plug-in connection
standard version and meteorological version

for measuring humidity and temperature
Mela® humidity sensing element
output: EIA485 / Modbus protocol
rod shaped sensor, aluminum, terminal head optional

in stainless steel housing
for pressure up to 25 bar
with ball tap exchangeable under pressure up to 10 bar

for measuring relative humidity and temperature
with capacitive Mela® humidity sensing element
with current or voltage output
industrial sensors for applications up to 200°C / up to 25 bar

for measuring relative humidity and temperature
with capacitive Mela® humidity sensing element
with current or voltage output
robust aluminium die-cast housing for outdoor use.

with capacitive Mela® humidity sensing element
for measuring relative humidity and temperature
in air and othes non-aggressive gases
in areas susceptible to explosion
in the categories 2G, 1/2G and 2D
outputs: 2 x 4 ... 20 mA
Degree of protection now: IP66

with exchangeable digital measuring head
Plug-and-Measure Unit PMU-P
for measuring relative humidity and temperature
with capacitive Mela® humidity sensing element

with hx-processor
for determination of the values dew point temperature, water content, enthalpy, absolute humidity and wet bulb temperature
current or voltage output
rod-shaped sensor, black synthetic material housing

calibrated measurement head for humidity and temperature
with asynchronous ASCII transmission protocol,
calibrated for relative humidity and temperature in
exchangeable, plug-in design.

with exchangeable digital measuring head
Plug-and-Measure Unit PMU for measuring relative humidity and temperature with capacitive Mela® humidity sensing element

with RS232 signal level converter and sub-D-jack for digital transfer of measurement values
rod shaped sensor, black synthetic material housing
USB adapter available

with exchangeable digital measuring head
Plug-and-Measure Unit PMU-V
for measuring relative humidity and temperature with capacitive Mela® humidity sensing element

with hx-processor
for determination of the values dew point temperature,
water content, enthalpy, absolute humidity and wet bulb temperature
current or voltage output
rod-shaped sensor
or duct version with high grade steel sensor tube

with exchangeable digital measuring head
Plug-and-Measure Unit PMU
for measuring relative humidity and temperature with capacitive Mela® humidity sensing element

with RS232 level converter
for digital transfer of measurement values
rod version and industrial designs
according to type up to 200°C or 25 bar

with integrated sensor power supply
and self-optimization
input: 2 x 0 ... 20mA

Dual Function controller e. g. for humidity and temperature
integrated sensor power supply otional
inputs: 0/4 ... 20 mA, 0/0,2 ... 1 V or Pt100 and others

for humidity, temperature and pressure
for sensors with resistance, current, and voltage output.

with Polyga® humidity measuring element
scale range 30...100%rh
with one or two changeover contacts (HG80 or HG80-2)
version with internal adjusting knob available (HG80i)

with Polyga® measuring element
scale range 30...100%rh
with one or two changeover contacts (HG120 or HG120-2)
version with internal adjusting knob available (HG120i)

with Polyga® measuring element
scale range 30...100%rh
version with internal adjusting knob available (HGMini-i)

Room hygrostat
with Polyga® measuring element
working range 5...95 %RH

with Polyga® measuring element
scale range 30...100%rh
OEM duct version
version with two changeover contacts available (HM80-2)

with Polyga® measuring element
scale range 30...100%rh
OEM room version

scale range humidity 30...100%rh
scale range temperature 10..35°C

Scale range humidity: 30...10% rh
Scale range temperature: 10...60°C

condensation controlling switch
with Polyga® measuring element

Humidity sensors for condensation control  with Mela® sensing element
0 ... 10 V or switching output

for measuring relative humidity
in air and other non-aggressive gases

Sub-assemblies for measuring
relative humidity and/ or temperature
in air and in other non-aggressive gases with capacitive Mela® humidity sensing element

OEM Sub-Assembly converting
the humidity signal  into a calibrated frequency signal with capacitive Mela® humidity sensing element

OEM sub-assemblies converting
the humidity signal into a calibrated voltage signal with capacitive Mela® humidity sensing element