EXPO21XX - Customizable high-speed high-resolution cameras from OptoMotive

HARDWARE
CAMELEON Small entry level FPGA smart camera. Specifications: Based on TE0300 BMLP module which was developed in cooperation with Trenz Electronic (Spartan3E 1600, 64MB DDR SDRAM, 100MHz oscillator) Aptina CMOS sensors 360k (1/3”), 1.3M (1/2”) and 3.1M pixels (1/2”) 10 bit parallel pixel data up to 48MHz pixel clock up to 64 full frames per second 40-pin dual row 1.27mm connector for head connection with 20 IOs 34-pin dual row 2.54mm expansion connector with 28 Ios 5-pin 2.54mm header for industrial IP68 USB Connector M12x0.5mm lens holders + lenses included Size 47 mm x 54 mm

CAMELEON BASEBOARD Cameleon is a ready to use imaging solution based on popular TE0300 FPGA USB module. It offers a simple entry point to FPGA imaging. The FPGA can be used for real-time high-speed image processing. The package includes FPGA reference design and PC software with source code. Examples in C#, MatLab, Xilinx tool suite. Image processing cores include 3D laser triangulation (3D scanning) and 2D FIR filter. It is extremely versatile and rich in free IOs, which can be used for VGA, SPI, I2C, encoders...	CAMELEON ACADEMIC PACK Cameleon Academic Pack is completely the same as OptoMotive Cameleon itself, but it is only available for academic institutions. It is a ready to use imaging solution based on popular TE0300 FPGA USB module. It offers a simple entry point to FPGA imaging. The FPGA can be used for real-time high-speed image processing. The package includes FPGA reference design and PC software with source code. Examples in C#, MatLab, Xilinx tool suite. Image processing cores include 3D laser triangulation (3D scanning) and 2D FIR filter. It is extremely versatile and rich in free IOs, which can be used for VGA, SPI, I2C, encoders...	CAMELEON HEAD Cameleon Sensor Head is an add-on to OptoMotive Cameleon Baseboard camera. By adding this head to OptoMotive Cameleon camera you get a stereo or even triple sensor camera solution. OptoMotive Cameleon baseboard camera already includes support for additional heads.


CAMELOPARD Camelopard is a high-performance OptoMotive USB camera based on TE0320 FPGA USB module. It uses high-performance system-on-chip (SOC) technology, combined with the latest high-speed industrial Sony CMOS sensors. The sensors exhibit high sensitivity, very low noise and no smear at maximal speed. The large camera buffer enables capture of sequence of events at very high speed. Specifications: Based on TE0320 BMLP module which was developed in cooperation with Trenz Electronic (Spartan3A DSP 1800 or 3400, 128MB DDR SDRAM, 100MHz oscillator) Sony IMX035 and IMX036 CMOS sensors 1/3'' size, rolling shutter 10 bit parallel pixel data 216MHz pixel clock up to 120 full frames per second IO: 1x input, 1x output, optically isolated 5-pin 2.54mm header for industrial USB Connector Size of PCB: 48 mm x 68 mm

		High frame rate FPGA smart camera. Features: Industrial CMOS Sony 1/3” sensors 1.4M and 3.2M pixel 128MB in-camera buffer Large FPGA with high DSP capabilities USB powered Isolated digital input and output (trigger/flash) CNC housing or OEM Firmware can be upgraded to add new features Simple, but powerful CAM_API

VELOCIRAPTOR Velociraptor is the ultimate FPGA camera with very large FPGA and extremely high speed imaging sensor. It is based on the new GigaBee modules, which incorporate dual DDR3 memory and Gigabit Ethernet. The ultimate-performance system-on-chip (SOC) technology, combined with the latest turbocharged industrial CMOSIS imaging sensors. Specifications: Based on GigaBee module which was developed in cooperation with Trenz Electronic (Spartan6 LX100 or LX150, 2x128MB DDR3 SDRAM, 10/100/1000 PHY) CMOSIS imaging sensor CMV2000 (2/3'' size) or CMV4000 (1'' size), global shutter, high dynamic range mode (HDR) 10/12 bit pixel data up to 768MHz pixel clock 340 (CMV2000) or 180 (CMV4000) full frames per second with compression 55 (CMV2000) or 30 (CMV4000) full frames per second RAW or 400 FPS VGA 4-pin LEMO Connector for trigger/flash Size: 54 x 40 x 92 mm

		The ultimate FPGA smart camera. Features: Small and ruggedized design Ethernet powered (IEEE 802.3at PoE) Built to supports upcoming GigE Vision v2.0 Turbocharged CMOSIS imaging sensor Excellent image quality 2048x1088 or 2048x2048 pixels Incredible frame rates Ultimate FPGA System-on-Chip Super speed FPGA image processing Optional real-time JPEG compression core Versatile Targeted to metrology and industrial use.

SOFTWARE

QTCAMERA QtCamera is a MS Windows based Graphical User Interface (GUI) for video viewing, storing and camera control. The GUI was composed in C++ using powerful and easy to use Nokia Qt and QtCreator (both part of Qt SDK), which are LGPL licensed and can be freely downloaded from internet. The latest revision was compiled using Microsoft Visual Studio and includes openCV open source image processing library. Full source code is available together with OptoMotive Cameleon cameras in development kit for free!	CAM_API CAM_API is a part of OptoMotive Hardware Software Development Kit. It is a MS Windows Dynamic Link Library (DLL) based Application Programmer Interface (API) used to communicate with OptoMotive cameras. It is simple to use and transparent for direct communication with the camera. Multiple usage examples simplify user application development. It is included in all of OptoMotive camera packages free of charge.	SHARKI SHARKi is our latest MS Windows based Graphical User Interface (GUI) for video viewing, storing and camera control. The GUI was composed in C# using latest Microsoft Visual Studio and Windows Presentation Foundation libraries (WPF). Its graphical skin was developed in Microsft Silverlight and can be modified to meet customer graphical expectations. SHARKi is included in all OptoMotive Camelopard camera packages!

EXPO21XX e-Fair		Navigation : EXPO21XX.com > AUTOMATION 21XX > Machine Vision & Image Processing > OptoMotive