| Positioning
technology |
| Due to the wide
variety of different models and options, positioning units from halstrup-walcher
are eminently suitable for use in machinery and plant construction (packing
lines, filling units, printing equipment, wood-processing equipment, metering
pumps, valve control) and in medical technology and the pharmaceutical industry.
For more information, please visit:
halstrup-walcher GmbH: Positioning technology |
|
 |
 |
 |
 |
 |
| PSE 40x |
| Positioning system with control unit, stepping motor, gear
and absolute measurement system. Automatic re-fitting within minutes, no wastage
as a result of operating errors, considerable reduction of downtimes. |
|
| PSE 41x |
| Positioning system with control unit, stepping motor, gear
and absolute measurement system. Automatic re-fitting within minutes, no wastage
as a result of operating errors, considerable reduction of downtimes. |
|
| PSE 42x |
| Positioning system with control unit, stepping motor, gear
and absolute measurement system. Automatic re-fitting within minutes, no wastage
as a result of operating errors, considerable reduction of downtimes. |
|
| PSE 43x |
| Positioning system with control unit, motor, gear and
absolute measurement system. Automatic re-fitting within minutes, no wastage as
a result of operating errors, considerable reduction of downtimes. |
|
| PSE 40xA |
| Positioning system with control unit, stepping motor, gear
and absolute measurement system by web alignment. |
|
 |
 |
 |
 |
 |
| PSE 31x |
| Positioning system with controller, gear with a
electronically commutated DC motor (brushless) and absolute measuring system.
Machines and stops are reset automatically within minutes, which eliminates
rejects due to operator error and significantly reduces downtimes. CAN bus data
interface. |
|
| PSE 200 |
| Actuator and position control loop for the positioning of
rotating machine parts. |
|
| PSE 272 |
| Positioning system. Complete unit consisting of actuator
and position control loop. Simple set-point value, can be connected directly to
SPC. Control range up to 20 revolutions. Protection class IP 65. |
|
| PSE 100 |
| Positioning system with torque of up to 10 Nm, consisting
of actuator and position control loop for the positioning of rotating machine
parts. |
|
| PSE 172 |
| Positioning system. Complete unit consisting of actuator
and position control loop. Simple set-point value, can be connected directly to
SPC. Control range up to 20 revolutions. Protection class IP 65. |
|
| Drive technology |
| Due to the wide
variety of different models and options, gears from halstrup-walcher are
eminently suitable for use in building installations (e.g. for ventilation,
exhaust air and flue gas dampers, for valves, window openers), in medical
technology (e.g. for dialysis pumps, X-ray equipment, recorders for ECG/EEG
equipment), for optical and electronic equipment (e.g. for scanners, measuring
systems for ticket and card readers), in machinery and plant construction (ink
zone adjustment, limit-stop control, vending machines, metering pumps, filler
units).
For more information, please visit:
halstrup-walcher GmbH: Drive technology |
|
 |
 |
 |
 |
 |
| N 40 V |
| Spur gear. Plate gear with low gear backlash, carbonised
and mounted in a slide bearing output shaft (also fitted with ball bearings as
an option). |
|
| N64 V 30 |
| Spur gear. Plate gear with low gear backlash, carbonised
and mounted in a slide bearing output shaft (also fitted with ball bearings as
an option). |
|
| N 72 |
| Spur wheel, compact design with a variety of
transmissions, can be used with motors from various manufacturers. |
|
| N 100 |
| Spur gear, plate gear with low gear backlash, carbonised
and mounted in a slide bearing output shaft (also fitted with ball bearings as
an option). |
|
| LA 68 |
| Linear drive. Drive with selection of different lifting
speeds. Length of stroke is limited by position switches. |
|
| Pressure measuring
technology |
Differential-pressure transducers and calibration equipment for air and
non-aggressive gases.
Due to the wide variety of different models and options, differential-pressure
transducers and calibration equipment from halstrup-walcher are eminently
suitable for use in ventilation and air-conditioning technology, for filter
control, in clean rooms and medical technology, in mechanical engineering and as
service equipment for assembly and maintenance work.
The pressure transducer and calibration equipment are available with calibration
record or DKD certificate.For more information, please visit:
halstrup-walcher GmbH: Pressure measuring technology |
|
 |
 |
 |
 |
 |
| PUC 24 |
| Process monitoring device for clean rooms. Room pressure
measurement with inputs for humidity and temperature sensors. Measured values
are sent to the control module via a Profibus interface. |
|
| P 26 |
Freely scalable differential pressure transducer;
Measurement ranges between ± 10 Pa and ± 100 kPa. Especially suited for
monitoring pressure in clean rooms, for use in special mechanical engineering
applications, or for monitoring a sterile environment. |
|
| P92 |
| Measuring transducer with measuring range from ± 10 Pa,
high sensitivity and precision due to automatic zero balancing, RS 232 C
interface possible but also available with DP Profibus. |
|
| P82 R |
| Measuring transducer with square root-extracted output
characteristic, which is thus suitable for the direct measurement of the
volumetric flow rate via measuring orifice, concentric nozzle, flow grid, etc. |
|
| PU/PI |
| Measuring transducer with high precision and long-term
stability for measuring the pressure in air-conditioning and ventilation units,
for monitoring filling levels and for filter control, etc. |
|
 |
 |
 |
 |
 |
| PIZ |
| Measuring transducer with two-conductor system 10 - 32 V,
with high precision and long-term stability for measuring the pressure in
air-conditioning and ventilation units, for monitoring filling levels and for
filter control. |
|
| PS 10 |
| Measuring transducer preferably used as built-in device in
air-conditioning and ventilation technology. |
|
| PK 15 |
| Measuring transducer with analog output for applications
requiring an optional or acoustic signal as warning message. |
|
| PUE 94 |
| Measuring transducer with high overload capacity for
measurements that could be impaired by pressure fluctuations. |
|
| PS 18 |
| Low-cost measuring transducer for simple tasks in
air-conditioning and ventilation technology with high sensitivity and very good
long-term stability. |
|
 |
 |
 |
 |
|
| PS11/PK11 |
| Compact differential pressure transducer for top-hat rail
mounting with contact point. |
|
| REG 21 |
| Pressure controller, design in panel housing with large,
bright LE-Display, with 2 adjustable relay outputs, which allows to realize a 2
or 3 step controller. In addition to the relay output there is an analogue
output. |
|
| EMA 200 |
| Portable, battery-powered, digital pressure gauge for
assembly and maintenance tasks performed by service technicians in the heating,
air-conditioning and ventilation industries. For measuring fireplace drafts,
volume flow, etc., and for monitoring filters, etc. Measurement ranges up to 0 -
200 kPa. |
|
| EMA 84 |
| Portable, battery-operated measuring device for assembly
and maintenance work in customer services for heating, air-conditioning and
ventilation units, for measuring the chimney draught, the wind pressure, for
filter control, for laboratory work, etc. Measuring range up to 100 kPa. |
|
|
 |
 |
 |
 |
 |
| KAL 84 |
| In the case of a variable volume, a hand pump (optional)
can also be connected. Use in accordance with the Medical Devices Directive,
Measurement Control |
|
| KAL 100 |
| Portable, battery-operated calibration device. A
combination of pressure transducer and pressure gauge. The desired pressure is
displayed digitally. Connection to an external air compressor is unnecessary. |
|
| KAL 200 |
| Portable calibration device with integrated pressure
generator. Combination pressure transducer and pressure gauge. The desired
pressure is set by digital input. No need to connect to an external pressure
generator. |
|
| AD 1000 |
| Absolute pressure transducer is suitable for measuring or
controlling air pressure or absolute pressure. |
|
| BA 90 |
| Digital manometer is suitable for installation in control
panels to display the barometric air pressure. |
|
E 
