|
YUSHIN
Traverse-Type
Robots Find Applications on Small Machines
YAI Has
Recently Designed Small Traverse-Type Robots to Fit the
Demand
Cranston,
RI- In the past small machines ran automatic and many
had sprue pickers for runner separation. The latest
trend in the industry is to add more value and package
parts; therefore, molders are beginning to use
traverse-type robots. Cavity separation on small
machines is also becoming a big issue driving the
requirement for part extraction, not runner extraction.
Advances with micro-molding created a demand for part
capturing because the parts are small, delicate, and
hard to contain under the press if ejected. Traverse
robots for small machines were typically adaptations of
robots made for bigger tonnage's and they did not fit
small machines well.
|
 |
|
|
Yushin
Linear Robot
|
.. |
|
Photo
Yushin
|
|
YAI
has designed small traverse-type robots to fit this
range of machines. YAI introduced the AN-M-60, two-axis
air and servo-drive, traverse-axis robots for machines
from 30-to 80 tons. The robot uses the same handheld
controls and many similar parts to our popular AN/ANII
series. YAI introduced the VN-EA-35 all servo-drive
robot for presses from 15-to 50 tons and the VN-EA-60
all servo-driven robot for presses 40-to 80 tons. The
robots use the same touch-screen controls from our
popular VN series robots and many common parts. All of
the robots are designed for virtually maintenance free
operation
Source
Yushin
Article Reference : 002055
|
ROBOTICS
NEWS 
More about this theme
: