 |
1
 |
 |
| I1 |
|
 |
the Netherlands |
ENERPAC |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Navigation |
 |
|
|
|
Offer Profile
Enerpac is the recognized
global leader in high-force tools & equipment used in industrial markets.
Our comprehensive family of tools and equipment deliver reliable and
dependable performance for virtually any industrial segment, from the
smallest cylinder to computer-controlled systems for lifting huge
structures.
|
|
|
|
Product Line Up
|
Cylinders, Lifting Products and Systems
Enerpac provides the largest selection of cylinders
and lifting systems, fully supported and available through the most
extensive network of distributors worldwide. We have a solution for
virtually any application – lifting, pushing, pulling, bending or holding –
in most industrial and commercial work environments. Enerpac offers hundreds
of different configurations of cylinders and lifting systems, plus products
ranging from jacks and lifting bags, for portability and tight fits, to
engineered systems for precise control over multiple lift points.
|
|
|
|
General Purpose Cylinders
RC, RSM, RCS, CLP, RCH, RRH, BRC, BRP, SC-series Capacity: 5 - 500 tons
Stroke: .25 - 14.25 inches
Max. Pressure: 10,000 psi |
 |
Lightweight Aluminum Cylinders
Utilizing the latest in alloy technology, high-strength
coatings, seal design and bearing materials, Enerpac aluminum cylinders can
change the way you think about your cylinder applications. Our cylinders
provide the strength of steel with the weight, transportability and easy
positioning of aluminum. Capacity: 20 - 150 tons
Stroke: 1.97-7.87 inches
Max. Pressure: 10,000 psi |
|
High Tonnage Construction Cylinders
Capacity: 50 - 1,000 tons
Stroke: 1.97 - 11.81 inches
Max. Pressure: 10,000 psi
|
|
|
|
Low Height Cylinders
CLP, RSM, RCS-series Capacity: 5 - 500 tons
Stroke: .25 - 2.44 inches
Max. Pressure: 10,000 psi |
|
Hollow Plunger Cylinders
RCH, RACH, RRH-series Capacity: 12 - 150 tons
Stroke: .31 - 10.13 inches
Center Hole: .77 - 3.13 inches
Max. Pressure: 10,000 psi |
|
Long Stroke / High Cycle Cylinders
RR, RD, AD-series Capacity: 4 - 500 tons
Stroke: 1.13 - 48.00 inches
Max. Pressure: 10,000 psi |
|
|
|
Specialty Lifting Products
LPC, LB, PR, JHA, JH, LW, SOH-series Capacity: 5
- 150 tons
Stroke: 2 - 6.18 inches
Max. Pressure: 10,000 psi |
|
Lifting Systems
PR, SLS, SHS, BLS-series Capacity: 10 - 1000 tons
Max. Stroke: 6 - 19.6 inches
Max. Pressure: 10,000 psi |
|
|
|
|
|
Pumps and Valves
ENERPAC combines the widest selection of hydraulic
pumps available with reliability, durability and built-in safety to make it
easy to find the right pumps for any application requiring applied force.
Enerpac features over 1,000 different pump configurations, including manual,
battery powered, electric-, air-, and gasoline-powered models, perfectly
matched to Enerpac’s family of tools and accessories. These pumps offer a
lifetime warranty, and are designed to make you more productive and
efficient in the work you perform.
|
|
|
|
Manual Pumps
Portable, durable, easy-to-use. Enerpac’s large selection
of manual pumps makes it easy to find the most effective compact pump.
Reservoir: 18 - 453 in3
Flow: .037 - .58 in3/stroke
Max. Pressure: 1,500 - 40,000 psi |
|
Electric Pumps
Enerpac’s wide range of electric-driven hydraulic pumps
provide durability, high performance and economy. Reservoir: .5 -
25 gal.
Flow: 8.0 - 200 in3/min.
Max. Pressure: 10,000 ps |
|
Air Hydraulic Pumps
Enerpac’s air-driven hydraulic pumps all feature rugged
construction, high-efficiency designs and proven reliability. Reservoir:
1.0 - 305 in3
Flow: 8 - 80 in3/min
Max. Pressure: 10,000 - 21,750 psi |
|
|
|
Gasoline Pumps
Enerpac’s gasoline-driven hydraulic pumps are designed
for high efficiency, with higher by-pass pressure for improved productivity.
From small portable and high-performance transportable configurations, to
large capacity models.
Reservoir: 2.5 - 25 gallon
Flow: 1.5 - 200 in3/min
Engine Size: 7.1, 8.5 and 17.0 Ft.lbs
Max. Pressure: 10,000 psi |
|
Hydraulic Valves
Available in a wide variety of models and configurations,
Enerpac has the correct valve to match your application. Pressure:
0 - 10,000 psi
Flow Max.: 920 - 1040 in3/min
Voltage: 24, 115, 230 V |
|
|
|
|
|
System Components
Enerpac’s System Components are the perfect complement
to Enerpac’s cylinders, tools and pumps. The most extensive range of
components, available and supported worldwide, completes the Enerpac
hydraulic system to provide dependable and efficient performance. Every one
of these components - gauges, fittings, manifolds, hoses, couplers and
hydraulic oil – is manufactured to the highest standards, in keeping with
Enerpac’s focus on reliability and commitment to safety.
|
|
|
|
Gauges and Accessories
Pressure Range: 0 - 50,000 psi
Face Diameter: 2.5 - 6.4 inches
Accuracy: ± 0.2% - 1.5%
|
|
Hoses, Couplers and Oil
Contents: 1 quart - 55 gallon Inside
Diameter: .25 - .38 inch
Length: 2 - 50 feet
Max. Pressure: 10,000 psi
Max. Flow: 2,500 in3/min
Thread: 1/4" and 3/8" NPTF
Max. Pressure: 10,000 psi
|
|
Manifolds and Fittings
Connection: 6 and 7 oil ports
Oil Ports: 3/8" NPTF
Max. Pressure: 10,000 psi Ports: 2 - 4
Max. Pressure: 10,000 psi
|
|
Hydraulic Valves
Pressure: 0 - 10,000 psi
Flow Max.: 920 - 1040 in3/min
Voltage: 24, 115, 230 V
|
|
|
Presses
Enerpac’s System Components are the perfect complement
to Enerpac’s cylinders, tools and pumps. The most extensive range of
components, available and supported worldwide, completes the Enerpac
hydraulic system to provide dependable and efficient performance. Every one
of these components - gauges, fittings, manifolds, hoses, couplers and
hydraulic oil – is manufactured to the highest standards, in keeping with
Enerpac’s focus on reliability and commitment to safety.
|
|
|
|
Press Accessories for VLP, XLP, BPR-series
Capacity: 10 - 200 ton
|
|
A, IP-Series, Arbor, C-Clamp and Bench Frame Presses
Capacity: 5 - 30 ton
Max. Daylight and Width: 15.38 and 15.00 inches
Mounting Capabilities: Fixed or Portable
Max. Pressure: 10,000 psi
|
|
TM, LH-Series, Tension Meter and Load Cells
Capacity: 2,000 - 200,000 lbs
Accuracy: ± 2%
|
|
IPR-Series, Roll Frame Presses
Capacity: 50 - 200 tons
Max. Daylight and Width: 51.00 & 48.00 inches
Max. Pressure: 10,000 psi
|
|
|
|
BV-Series, Hydraulic Bench Vise
Max. Force: 5 tons
Max. Jaw Opening: 8 inches
Jaw Width: 8 inches
Max. Pressure: 10,000 psi
|
|
IP-Series H-Frame Presses
Capacity: 10 - 200 tons
Max. Daylight and Width: 54.5 - 48.0 inches
Max. Pressure: 10,000 psi
|
|
IP-Series, Custom Built Presses
Capacity: 10-200 tons
Max. Daylight and Width: 54.5 & 48.0 inches
Max. Pressure: 10,000 psi
|
|
|
|
|
|
Pullers
ENERPAC offers a complete line of pullers with the
widest range of sizes, capacities and styles. Whether your application
requires mechanical, hydraulic or the patented Posi Lock® system, Enerpac
can satisfy your requirements. Made of high strength steel alloys, you can
depend on Enerpac pullers to provide years of trouble-free operation, even
in the harshest environments.
|
|
|
|
EP-Series, Posi Lock® Mechanical Pullers
Capacity: 2 - 40 tons
Max. Reach: 4.00 - 14.00 inches
Max. Spread: 0.50 - 25.00 inches
|
|
EPH-Series, Posi Lock® Hydraulic Grip Pullers
Capacity: 10 - 50 tons
Max. Reach: 8.0 - 14.0 inches
Max. Spread: 0.75 - 25.0 inches
Max. Pressure: 10,000 psi
|
|
EPH-Series, Posi Lock® 100 Ton Hydraulic Grip Pullers
Capacity: 100 tons
Max. Reach: 48 inches
Max. Spread: 70 inches
Max. Pressure: 10,000 psi
|
|
BHP-Series, Bearing Puller
Capacity: 8, 20, 30 and 50 tons
Max. Reach: 4.33 - 5.71 inches
Max. Spread: 4.33 - 14.17 inches
Max. Pressure: 10,000 psi
|
|
|
|
BHP-Series, Bearing Cup Puller
Capacity: 8, 20, 30 and 50 tons
Max. Reach: 4.33 - 5.71 inches
Max. Spread: 4.33 - 14.17 inches
Max. Pressure: 10,000 psi
|
|
BHP-Series, Grip Puller Sets
Capacity: 8, 20, 30 and 50 tons
Max. Reach: 9.92 - 27.56 inches
Max. Spread: 9.84 - 43.30 inches
Max. Pressure: 10,000 psi
|
|
BHP-Series, Cross Bearing Puller Sets
Capacity: 8, 20, 30 and 50 tons
Max. Reach: 14.0 - 34.00 inches
Max. Spread: 10.50 - 22.46 inches
Max. Pressure: 10,000 psi
|
|
BHP-Series, Master Puller Sets
Capacity: 8, 20, 30 and 50 tons
|
|
|
|
Specialty Tools
Enerpac offers the most complete line of Specialty
Tools in the industry. Each is designed to efficiently and safely solve
unique maintenance and production challenges such as bearing & wheel
pulling, pipe bending, cutting, spreading and tensioning applications.
Enerpac’s Specialty Tools are available in both hydraulic and mechanical
configurations, and are also available as complete sets – the precise
matching of tools, pumps and system components – to make your work easier
and safer to perform.
|
|
|
|
WR, A-Series, Hydraulic Wedgie and Spread Cylinders
Capacity: 0.75 - 1.50 ton
Tip Clearance: 0.50 - 1.38 inches
Max. Spread: 3.70 - 11.50 inches
Max. Pressure: 10,000 psi
|
|
STB-Series, Pipe Bender Sets
Nominal Pipe Size: 0.5 - 4 inches
Max. Bend Angle: 90º
Max. Pressure: 10,000 psi
|
|
WMC-Series, Self-Contained Hydraulic Cutters
Capacity: 3 - 20 tons
Max. Material Diameter: 0.38 - 3.38 inches
Max. Pressure: 10,000 psi
|
|
WHC, WHR-Series, Hydraulic Cutterheads
Capacity: 3 - 20 tons
Cutting Capacity: 0.50 - 4 inches
Max. Pressure: 10,000 psi
|
|
|
|
CM-Series, Industrial Storage Cases
Case Size: .67 - 16 Cubic Ft.
|
|
SP-Series, Lightweight Hydraulic Punch
Capacity: 35 tons
Hole Sizes: 0.31 - 0.81 inches
Max. Pressure: 10,000 psi
|
|
LW-Series, Vertical Lifting Wedge
Min. Clearance: .39 inches
Max. Lift Height: 2.72* inches
Max. Force: 16 tons
Max. Pressure: 10,000 psi
|
|
SP-Series, 50 Ton Hydraulic Punch
Capacity: 50 tons
Hole Sizes: 0.53 - 1.03 inches
Max. Pressure: 10,000 psi
|
|
|
|
ELP, ER, ES-Series, Heavy-Duty Caterroller Load Skates
Max. Carrying Capacity: 80 tons
|
|
MS-Series, Maintenance Sets
Capacity: 2.5 - 12.5 tons
Max. Pressure: 5,000 psi
|
|
ST-Series, Tool-Pump Sets
Punch Sets: 35 tons
Cutter Sets: 4-20 tons
Pipe Benders: 1/2-4 inches
Max. Pressure: 10,000 psi
|
|
DA, PTJ-Series, Mono-Strand Stressing Tools
Capacity: 20 - 30 tons
Stroke: 8.5 - 10 inches
Strand Diameters: .375 - .60 inch
Max. Pressure: 6,500 - 10,000 psi
|
|
|
|
MS-Series, Base, Collar and Plunger Attachments
Capacity: 2.5 - 12.5 tons
Pressure: 5,000 psi
|
|
MS-Series, Chains and Attachments for Pulling
Capacity: 2.5 - 12.5 tons
Pressure: 5,000 psi
|
|
MS-Series, Tubes, Connectors and Adaptors
Capacity: 1.0 - 12.5 tons
Pressure: 5,000 psi
|
|
|
|
|
|
Bolting
Enerpac’s comprehensive range of hydraulic and
mechanical Bolting products provides precise & effective force to make your
work more productive, safer, and easier to perform. From joint assembly and
controlled tightening to joint separation, Enerpac’s bolting tools &
accessories offer the solution best-suited to the project, available from
one source.
|
|
|
|
Joint Assembly Tools
Capacity: 12 - 100 tons
Stroke: .31 - 6.13 inches
Center Hole: .77 - 3.11 inches
Max. Pressure: 10,000 psi Bolt Hole Range: 11/16 inch -
2-1/8 inches
Flange Wall Thickness: 11/16 - 8 inches
Max. Force: 0.3 - 5.5 tons
|
|
Controlled Tightening Tools
Fasteners must be tightened to the correct force to
prevent failure in service. The accurate application of load to a fastener
assembly is critical to achieving joint integrity. Enerpac’s Bolting
solutions provide a comprehensive range of applied force controlled
tightening options best matched to your application. Max. Torque:
19,875 - 35,000 Ft.lbs
Square Drive:3/4 – 2 1/2 inches
Nose Radius: .99 - 4.52 inches
Max. Pressure: 10,000 - 21,750 psi |
|
Joint Separation Tools
Correct joint disassembly is especially important during
maintenance operations. Separation of stubborn joints is often a laborious
and time-consuming task. Traditional methods may carry the risk of personal
injury or damage to expensive joint components. Our wide range of Joint
Separation equipment is designed specifically to provide quicker, simpler
and safer solutions. Capacity: 0.75 - 192.5 ton
Tip Clearance: 0.50 - 1.38 inches
Max. Spread: 0.24 - 11.50 inches
Max. Pressure: 10,000 - 11,600 psi |
|
Associated Pumps
Enerpac offers a wide range of hydraulic wrench pumps,
with electric or air motors to power single or double-acting hydraulic
torque wrenches. Safe and efficient new Enerpac Z-Class ZU4T-series pumps
with universal electric motor made especially for repetitive bolting tasks.
Reservoir: 0.5 - 10 gal.
Flow: 8 - 120 in3/min.
Max. Pressure: 10,000 - 21,750 psi |
|
|
|
Workholding
The full range of well-designed, versatile and
reliable Workholding products from Enerpac provides users with dependable
production automation solutions in virtually every type of manufacturing
process. Global distribution yet local technical support ensure that your
application needs will be solved successfully. Exclusive designs like our
Collet-Lok® products series, and a wide selection of high-performance power
sources, bring innovation and reliability to your project challenges.
|
|
|
|
Swing Cylinders
Enerpac Swing Cylinders offer the benefits of precision
and maximum clamping force, plus application flexibility through our wide
range of products. Their flexible design allows easier connections and
precise positioning, plus simple installation and removal. Available in
single- and double-acting models. Clamp Force: 475 - 7600 lbs
Stroke: .25 - 2.50 inch
Pressure: 500 - 5,000 psi |
|
Work Supports
Enerpac Work Supports combine the multiple mounting
configurations for design flexibility, corrosion resistance, and
low-pressure lock-up to plug into mechanical tool hydraulic systems. Our
exclusive Collet-Lok design allows the support to maintain its position even
after the hydraulic force is removed. Force: 1650 - 10,000 lbs
Stroke: .38 - .65 inch
Pressure: 700 - 5000 psi |
|
Linear Cylinders
Enerpac has the most complete line of Linear Cylinders –
compact short-stroke spring return cylinders to heavy-duty double-acting
automation cylinders. Whether you need to push it, pull it, clamp it, punch
it, stamp it, press it, or hold it in place for days at a time, Enerpac has
the right linear cylinder. Force 380 - 62,850 lbs
Stroke 0.09 - 12 inch
Pressure 500 - 10000 psi |
|
|
|
Power Sources
From simple manual pumps, to heavy-duty, and even
customizable electric-driven hydraulic pumps, Enerpac has a wide range of
power sources to meet your specific needs. Combined with a wide range of
accessories, Enerpac power sources are versatile, durable and designed for
long life and reliability.
|
|
Valves
A complete line of valves & accessories to complement any
hydraulic system. This includes manual and electric directional valves, plus
pressure control, flow control and specialty valves to satisfy your
application needs. Pressure: 0 - 10000 psi
Flow: 250 - 1830 in3/min
Voltage: 24 - 230 VAC |
|
System Components
The complete line of Enerpac’s Systems Components –
gauges, pressure switches, hoses, couplers – is available in a variety of
sizes, and is versatile enough for many applications. Specialized components
such as accumulators and automatic coupler systems complete the full range
of products. Each component is engineered to make your work easier and safer
to perform.
|
|
|
|
Mechanical Actuators
Enerpac’s line of Uni-lift® mechanical actuators has
set a new standard for linear motion control. Improving on the time-tested
concept of converting rotary movement into linear motion, the Uni-Lift
actuator series is ideal for a variety of challenging screw jack
applications such as satellite dish positioning, solar panel tracking as
well as moving heavy equipment.
|
|
|
|
M-Series, Machine Screw Actuators
Capacity .25 - 250 tons
Max. Travel 232 inches
Max. Speed 129 in/min
|
|
B-Series, Ball Screw Actuators
Capacity 1 - 100 tons
Max. Travel 230 inches
Max. Speed 175 in/min
|
|
Accessories
A comprehensive range of accessories are available to
tailor your UNI-LIFT® system to meet your project requirements.
|
|
|
|
Concrete Stressing Products
Enerpac features a versatile line of concrete
pre-stressing & post-tensioning hydraulic pumps, jacks, and accessories; all
from a single source. These comprehensive solutions combine the best of
three recognized brands: Enerpac, TT Fijnmechanica and Precision SURE-LOCK®.
|
|
|
|
|
|
Tensioning Jacks
capacity: 20 - 1000 tons
stroke: 6 - 20 in
strand diameters: .375-.60 in
max. pressure: 6,500-10,000 psi
|
|
|
|
Hydraulic Pumps
High efficiency, two-speed pumps makes fast work of most
stressing applications
Available in multiple voltage configurations
Reservoirs feature level indication and steel construction for ease of
operation and maximum durability
|
|
|
|
Rail Maintenance Equipment
Enerpac's rail maintenance equipment provides work
site solutions for stressing, lifting and surfacing.
|
|
|
|
A-Series, Mechanical Track Jacks
Rated Capacity per Jack 15 tons
Stroke 5.25 - 13 inch
|
|
RP-Series, Hydraulic Rail Pullers
Rated Pulling Capacity 120 tons
Stroke 6.5 - 15.5 inches
|
|
TJ-Series, POW'R-CLAW Hydraulic Track Jacks
Rated Capacity per Jack 10 tons
Stroke 5-9 inches
|
|
RP-Series, Hydraulic Rail Pullers
Rated Pulling / Pushing Capacity 70 / 35 tons
Stroke 8.00 inches
|
|
|
PR-Series, POW'R-RISER Lifting Jack
Rated Lifting Capacity 60-200 tons
Stroke 14-27 inches
Max. Pressure 10,000 psi
|
|
550-Series, Mechanical Rail Puller
Rated Capacity 30 tons
|
|
WJ-Series, Hydraulic Wheel Truck Jacks
Rated Capacity per Jack 60 tons
Stroke 5.50 & 16.20 inches
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
3
|
|
I 
