Extremely compact as well as large construction series

• AM
• EKM
• ECM
• CM
• SSCM
• UKM
• UKTM

with and without integrated aluminium ribs. Up to 35 bar oil pressure, cooling capacity from 1.5 to 300 kW, respectively 25 to 1 500 l/min. oil flow. Optionally with bypass valve for pressure peaks. Simple to clean.

Due to the increased safety demands in plant operation and environment protection, the

• AM/FS

has been developed from the AM model range. The unit offers protection against excess pressure and corrosion. Any leakage is immediately indicated via the digital pressure control.

Very low noise level combined with low costs in the model ranges

• LKI
• LKIHYD
• LKM

Up to 26 bar oil pressure, cooling capacity from 1.5 to 150 kW, respectively from 20 to 700l/min, oil flow. Optionally with bypass valve for pressure peaks. Various electric motors available.

Soldered and bolted plate heat exchanger

• PWT
• TL

Up to 30 bar oil pressure and from 25 to 3 000 l/min. oil flow. Operating temperature from -100 to +195 degrees. Soldered plate coolers are available from 10 - 200 plates. Bolted plate coolers are highly flexible and easy to clean thanks to the modular system.

Particularly low noise level with low costs in the model ranges

• TFS/A
• FNK

Up to 20 bar oil pressure. Auxiliary flow cooling eliminates pressure peaks. Installation position optional (ceiling, wall, floor). Various electric motors, pumps, oil filters and
soiling indicators available.
Optional air filter cassette.

Apart from heat exchangers, our product range includes accessories required to control the heat exchangers. This includes the mechanical water control valve type

• WRV

used to control oil-water heat exchangers and temperature switches type

• TR 12

used to control oil-air coolers and auxiliary flow coolers.

The new UKC-G series from Universal Hydraulik is specially developed for installation in tanks and gear boxes. The UKC-G can be simply mounted in existing threaded connections of tank heatings. Available in 17 sizes with cooling surfaces from 0.15 up to 0.43 m2 and thread sizes of 1.5" and 2". Maximum operating pressure 10 bar, maximum operating temperature 95°C.

Universal Hydraulik have been the distributor for RACINE / BOSCH products throughout Europe for the last 10 years. This includes, for example, self-controlling vane pumps (up to 210 bar) types

• PSV
• PVV
• PVQ

This type of pump, first developed by Racine in 1925 (since 1988 by BOSCH / RACINE), has been further developed and continues to set new standards worldwide.

Other RACINE / BOSCH types: Gear pumps, radial and axial piston pumps.

New from Universal Hydraulik: Screw pumps for industrial use series
SSP(low pressure) and HSSP (high pressure)

• SSP

For all pumps Universal Hydraulik garantees maintainance and repair.

in accordance with the currently valid ISO and DIN regulations.
In addition, standard cylinders up to 250 bar. In line with customer requirements we also develop special cylinders according to quite individual specifications.

• UHSZ

All cylinder versions can be produced as serve cylinders or fitted with an integrated position measuring system.

As a special development Universal Hydraulik designed clamping cylinders, which operate as replacement for mechanical mushroom-headed anchor screws. The hydraulic, easily operated sealing/closing elements are used mainly in the chemical industry. We have also been using cylinders for HPLC columns with internal anti-turning safety devices and integrated position measuring system now for some years.

• Clamping Cylinder