Navigation : EXPO21XX > VISION 21XX > H25: Image Sensors > ANAFOCUS
ANAFOCUS
  • Offer Profile
  • AnaFocus is specialized in the design and production of custom high-speed, high-performance CMOS camera systems on-chip (camera SoC) and vision systems on-chip (VSoC) for industrial, surveillance, scientific, and medical applications.

    Our team consists of over forty experienced and highly specialized engineers and PhDs expert in high-performance image sensor and SoC design, and in all aspects of vision technology: from camera design (hardware & software), optics and illumination, signal processing, to interfaces and vision algorithms.
Product Portfolio
  • Vision systems-on-chip

  • Eye-RIS VSoC

  • High-speed, monochrome vision system on-chip (VSOC) providing a single-chip solution from image capture to decision making while running at thousands of frames-per-second.

    Eye-RIS VSoC combines image capture, advanced image processing, and decision making at high frame-rates all in a single-chip solution.

    Eye-RIS VSOC connects with USB 2.0 and has several user-definable general purpose I/O pins. Eye-RIS VSOC is programmed in C/C++ language and is accompanied with an intuitive application development kit including a complete set of image-processing libraries

    176 x 144 resolution monochrome image acquisition with exposure as small as 20nsec.
    Single-chip vision solution combining image capture and processing at very high frame-rates
    UART, 2xPWM ports, 16-bit LVTTL GPIO, Trigger, USB 2.0 and JTAG Controller
    Dual 3.3V/1.8V supply
    700mW typical power consumption
    Dimensions: 45mm x 45mm x 26mm
  • Camera systems-on-chip & intelligent CMOS Image Sensors

    • LS4K CMOS SoC line-scan image sensor

    • Imager size 28.91mm (H) x 35µm (V)
      Active pixel 4,096 (4k mode) / 2,048 (2k mode)
      Pixel size 7um x 7um (4k mode) / 14um x 14um (2k mode)
      Pixel type 4T active-pixel with pinned photodiode
      Shutter type Global with programmable exposure time
      Line rate 16,250lps (4k-mode)
      Up to 70,000lps in 0.5k-mode
      Dynamic range up to 65dB (2k mode, analog gain x2)
      SNRMAX 50.4dB
      Saturation exposure 100nJ/cm2 (standard mode)
      NEI 9.4pJ/cm2 (standard mode)
      Image lag < 1%
      PRNU/DSNU <1% w/o correction and <0,1% after on-chip correction
      Programmable gain -6 to +21dB
      Programmable offset ±300mV
      Image processing PRNU, DSNU and lens shading on-chip correction
      Package 40-lead ceramic IDK package
      Power supply Dual 3.3V/1.8V
      Power consumption 500mW (maximum)
      External clock 10 MHz
    • Q-Eye CMOS Image Sensor

    • Key features
      - 32bits, 50MHz throughput
      - 6um active-pixel
      - QCIF resolution 176x144 pixels
      - Global-shutter with programmable exposition time
      - Maximum frame-rate: 6,500fps at 176 x 144 resolution / 8,135fps at 144 x 144 resolution
      > 50dB dynamic range (DR)
      > 45dB SNRMAX
      - 3,27 DN8-bit/(nJ/cm2) integrated response
      - 1% full-scale maximum Image lag
      - 2% full-scale maximum PRNU
      - 0.5% full-scale maximum DSNU

      Programmability
      - Programmable gain and offset
      - Linear/HDR image sensing
      - Windowing and sub-sampling with increased in frame-rate (in case of vertical windowing/sub-sampling)
      - On-chip FPN correction and true-CDS at pixel-level
      - Sensor programming via control unit provided as an - FPGA-synthesizable IP
    • Q-Eye CMOS Image Sensor-Processor

    • The Q-Eye ISP is a QCIF resolution CMOS high-speed image sensor-processor able to sense and process on-the-fly images at extreme frame rates. Q-Eye ISP delivers up to 8,000 grey-level and 40,000 binary images per second at full resolution of 144 x 144 pixels. It provides high parallelism between image sensing, pre-processing and readout. It also performs FPN correction. Q-Eye ISP supports partial scanning allowing frame rates over 65,000fps at 144 x 10 pixels.

      Camera manufacturers can take advantage of the pre-processing capability of Q-Eye ISP to develop ultra-compact cameras releasing the host PC or frame grabber from realizing computationally intensive image processing operations while reducing the output data.

      Cameras based on Q-Eye ISP can be connected to high-level algorithms (OCR, tracking, code reading…) available in commercial image-processing software to develop complete vision solutions.
  • Others

    • Eye-RIS VS

    • High-speed, monochrome vision system providing a single-device solution from image capture to decision making while running at thousands of frames-per-second. Eye-RIS VS combines sensor-level image pre-processing with high-performance digital post-processing running on FPGA. It provides a GiGE interface. Eye-RIS VS is programmed in C language and is accompanied with an intuitive application development kit including a complete set of image-processing libraries

      - 176 x 144 monochrome sensor-processor
      - High-speed global shutter programmable in steps of 20ns
      - High-speed mixed-signal image processing at the sensor level
      - Digital image post-processing with on-chip NIOS-II microprocessor and specific acceleration cores
      - Over 10,000fps image acquisition and processing
      64 + 64Mb DDR2 for program and image/data storage (expandable up to 256 + 256Mb)
      - UART, 2xPWM ports, 16-bit LVTTL GPIO, Trigger, GigE, and JTAG Controller.
      - Dimensions: 64mm x 67mm x 63mm
    • Eye-RIS PREVIA

    • Monochrome camera with embedded image processing able to capturing, processing and reading-out several thousands of images per second with 144x144 resolution. It incorporates an innovative sensor-processor chip able to capturing and performing complex on-the-fly image processing at extreme frame-rates. Pre-processing can be combined with post-processing in standard software tools resulting in a drastic increase of frame-rate while reducing overall power consumption, communication bandwidth and total solution cost.

      Image Sensor: 1/2” format
      Pixels: 144 x 144, 30µm square
      Frame Rate: 8,000fps at 144x144
      Ability to store up to 8 grey-scale images and performing very diverse image-processing operations with them at extreme frame-rates: spatial filtering with programmable bandwidth, grey-scale convolutions, adaptive local tresholding, etcetera
      Exposure: 20μs to 20ms programmable
      Dimensions: (W x H x D) 35 x 45 x 80mm
      Mass ~130 grams
      Interface: Camera Link with PoCL
      Power Consumption: ~4 Watts
    • Eye-RIS CAM

    • Monochrome, versatile and small dimensions camera able to capturing and reading-out high-quality pictures at rates of 8,000fps with full resolution of 144x144 pixels in digital format with 8-bit per pixel.The Eye-RIS CAM uses a standard Power over Camera Link Interface and configuration is extremely simple through available set of commands.

      Image Sensor: 1/2” format
      Pixels: 144 x 144, 30µm square
      Frame Rate: 8,000fps at 144x144
      Dynamic Range: 53dB
      Exposure: 20μs to 20ms programmable
      Gain: 0 to 15.99 in steps of 0.004
      Dimensions: 35(W)x45(H)x80mm(D)
      Mass ~130 grams
      Interface: Camera Link with PoCL
      Power Consumption: ~4 Watts
  • Custom solutions

  • High-speed, monochrome vision system on-chip (VSOC) providing a single-chip solution from image capture to decision making while running at thousands of frames-per-second.

    Eye-RIS VSoC combines image capture, advanced image processing, and decision making at high frame-rates all in a single-chip solution.

    Eye-RIS VSOC connects with USB 2.0 and has several user-definable general purpose I/O pins. Eye-RIS VSOC is programmed in C/C++ language and is accompanied with an intuitive application development kit including a complete set of image-processing libraries

    176 x 144 resolution monochrome image acquisition with exposure as small as 20nsec.
    Single-chip vision solution combining image capture and processing at very high frame-rates
    UART, 2xPWM ports, 16-bit LVTTL GPIO, Trigger, USB 2.0 and JTAG Controller
    Dual 3.3V/1.8V supply
    700mW typical power consumption
    Dimensions: 45mm x 45mm x 26mm