COFA-X | Deburring 1:1 crossbores | HEULE

Range

Each COFA-X tool is designed for the individual application. It is a solution for deburring the edges created by intersecting bores (crossbores) having a main bore to cross bore ratio of 1:1. It can also be used for intersecting bores with offset axes. The COFA-X starts from a bore diameter of 5.0 mm.

For each application, we require a precise application description in order to provide the correct solution. Please define the parameters and characteristics of the application as precisely as possible.

Main bore diameter including tolerance
Cross bore diameter including tolerance
Bore depth
Workpiece material
Penetration angle
Eccentricity
Production volume per year
Cycle time (actual / target)
Type of machine
Current solution
Special requirements for solution
STEP drawing (3D)

Send request

Construction

The tool concept is simple and is based on the COFA system. The tool body is a single unit and the blade is pre-tensioned so that it can follow the large bore unevenness. Two screws secure the replaceable spring to the tool body. After the deburring process is completed, this spring returns the blade to its starting position. The coated carbide blades are designed either exclusively for forward or backward cutting.

This relief of the tool body is required for the COFA-X to move off-centre into the bore, as the blade cannot retract due to the pretension in one direction and orientation.

Tool Concept

Blade
Roll pin
Bending spring
Tool body
Cylinder screws
Threaded pin

COFA-X | Spring and Blade Change

Process steps description

The COFA-X removes burrs from the very uneven edges caused by intersecting internal bores. This mechanical deburring solution for crossbores can be used in CNC operations and significantly improves process reliability.

In use, for example when deburring the back bore edge, the deburring tool is moved off-centre (with spindle stopped) to the bore centre axis to allow entry of the tool into the bore. It is moved back to offset value 0 for deburring. The deburring process then occurs in reverse working feed. The edges of the bore are machined without producing secondary burrs. At the end of the crossbore deburring process, the blade retracts into the tool body and the tool rapidly traverses out of the bore. This is done without having to stop the spindle.

Downloads

Would you like additional information regarding the X-BORES family and COFA-X technology? Click through our downloads.

COFA-X | Catalogue

pdf ・ 631,0 KB

COFA-X | Spring and Blade Change

pdf ・ 276,5 KB

To the Media & Download Centre

How do you deburr “intersecting bores”?

Find out how in our 20-minute Online Seminar "Deburring CROSSBORES". Just click on the link and take a look.

1 / 3

Fitting | Automated deburring of crossbores: X-BORES ensures a safe and reliable process.

More about the fitting All sample applications

Webseite_Vorschau_Anwendungen_nur Bild17

1 / 3

Crankshaft | Replacing manual processing with an automated process.

More about the crankshaft All sample applications

1 / 3

Manifold | Replacing costly thermal deburring with mechanical deburring.

More about the manifold block All sample applications

We are pleased to assist.

Thanks to our worldwide network of branch offices and approximately 50 sales partners in 35 countries, HEULE competence and know-how is always within quick and easy reach.

Find your point of contact