For careful handling

DCMS-Pro Manulift

Single-handed operation

Our DCMS-Pro Manulift combines fast and reliable load handling with variable speed control and operation with only one hand. It is based on the lifting unit of our DCS-Pro chain hoist and our DSM-CS control unit. The wide range of performance offered by the DCMS-Pro:

chain hoist operation and load handling with one hand
safe, reliable and precise positioning of sensitive goods and valuable products thanks to variable speed control
fast lifting motions at almost double the rated speed in the partial load range
quick-change coupling for a reliable hold
simple replacement of the load handling attachment
suitable for right-hand and left-hand operation.

Your Contact

Demag Cranes & Components GmbH

Postfach 67
58286 Wetter
Germany

Phone:

+49 (0) 2335 92-0

Fax:

+49 (0) 2335 92-7676

Email:

[email protected]

Contact

DemagcranesTV

Product information

The benefits at a glance

In comparison with the proven DCM-Pro with two lifting speeds, the DCMS-Pro offers you further benefits.

Maximum ease of operation

Infinitely variable speed control for lifting and lowering motions over the entire load range
Exceptionally fine control at slow speed
Smooth starting and exact positioning
Creep lifting speed from 0.15 m/min
Lifting speed, acceleration and braking ramp can be simply modified via the control unit
Suitable for right-hand and left-hand operation

Versatile performance

The various Manulift load handling attachments can be changed with ease
Pro-Hub function for up to 90 per cent higher nominal speed for partial load or no-load operations
Automatic switchover to creep lifting speed before the upper/lower limit positions are reached – speed ratio 1:100

High safety and reliability

Motor temperature monitoring device
Acceleration and braking ramps to reduce load sway

Technical data

DCMS-Pro Manulift (variable lifting speed)

Load Capacity [kg]	Manulift type DCMS-Pro	Lifting speed at 50/60 HZ [m/min]		Hook path [m]	FEM	Reev- ing	Weight [kg]
							for hook path
		VS_rated	VS _max			2.8m	4.3m
80	1	0.15-30	30	2.8 and 4.3	4m	1/1	25	27
125	1	0.15-30			4m
200	2	0.15-16			3m
250	2	0.15-16			2m+^*)

^*) 2m+ corresponds to 1,900 hours at full load

DCRS-Pro rocker switch (variable lifting speed)

Load Capacity [kg]	Manulift type DCRS-Pro	Lifting speed at 50/60 HZ [m/min]		Hook path [m]	FEM	Reev- ing	Weight [kg]
							for hook path
		VS_rated	VS _max				2.8m	4.3m
80	1	0.15-30	30	2.8 and 4.3	4m	1/1	25	27
125	1	0.15-30			4m
200	2	0.15-16			3m
250	2	0.15-16			2m+^*)

^*) 2m+ corresponds to 1,900 hours at full load

Customer benefits at glance

Safety

Low-voltage control pendant thanks to 24 V contactor control system
Safety-related functions satisfy at least Performance Level c and Category 2 to EN ISO 13849-1

Minimum load sway

Smooth cross-travel starting and braking motions for low-sway load handling
Speeds and acceleration/braking rates can be modified by means of the control pendant, if required

Long service life

Generously specified gearbox. 2m+ (1,900 hours) for main load capacities and up to 4m (6,300 hours) for demanding applications
All sub-assemblies of the chain hoist are rated for a long service life, even under the most demanding conditions

Temperature range

Reliable operation from -20 °C to +45 °C without any reduction in the duty factor
Operation also possible up to 60 °C and more

Ergonomics

Length of control cable or position of control pendant can be adjusted without the need for any wiring
Length of control cable that is not needed can be stored under the service cover

High-performance motor

Hoist motor has large safety reserves to provide for reliable operation for many years
Can be used for switching cycles way beyond usual market levels

Pro-Hub function

Up to 90% higher rated lifting speed in reduced load range

Easy to service

Gearbox & slipping clutch maintenance-free for up to 10 years
Brake maintenance-free for up to 10 years (up to 5 years for DC 10–25)
Simple and rapid maintenance and repair of individual components thanks to the modular chain hoist design – cuts any downtime to a minimum

Variable speeds

Valuable and sensitive parts can be moved and positioned more smoothly and reliably
Variable button characteristic like a car accelerator pedal

Status display

Display for elapsed operating time counter and operating statuses
Always up-to-date for service purposes

Slipping clutch monitoring

Harmful continuous slipping eliminated thanks to speed monitoring
Reliable protection against extreme overload
Load securely held in any operating situation and cannot drop while hoist is at standstill, since brake is arranged in front of the slipping clutch in load-bearing arrangement