PC5 Product Description
The PC5 is a small, plug-in RS-422 cable driver board that drives long cables up to 1000 feet using differential signaling to improve noise immunity. The PC5 can be used with the E2, E3, H1, H3, S1, and S2 encoders. Each board has a 5-pin socket designed to plug into the 5 pins of the encoder.
The output side of the PC5 is a 10-pin latching connector with a Broadcom/Avago compatible pinout (HEDL series). On the output side, the PC5 can use ribbon cables for lengths up to 100 feet; twisted pair cables are recommended for longer lengths. An optional 120 Ω terminating resistor may be placed across each pair on the receiver side of the cable, matching the cable's characteristic impedance. When calculating the power requirements of the encoder side of the cable, including the current consumed by the module, the driver IC and any terminating resistors. Be sure to supply sufficient voltage to compensate for the voltage drop due to the resistance of the power and ground wires. If an RS-422 receiver chip such as 26C32 is used on the receiver side of the cable, a 0.1uF ceramic monolithic bypass capacitor across +5V and ground located within 1 inch of the receiver chip is recommended.
Product Specifications
View here or download the specifications
ENVIRONMENTAL
| PARAMETER |
MIN. |
MAX. |
UNITS |
| Operating Temperature |
-40 |
100 |
C |
| Electrostatic Discharge, Human Body Model |
-2 |
2 |
kV |
MECHANICAL
The cable drivers shown below are compatible only with the E2, E3, H1, H3, S1 and S2.
PC5 Differential cable driver board. (shown mounted on an S1 encoder).
ELECTRICAL
| PARAMETER |
MIN. |
TYP. |
MAX. |
UNITS |
NOTES |
| Supply Voltage |
4.5 |
- |
5.5 |
Volts |
- |
| Supply Current (26C31) |
- |
1 |
2 |
mA |
- |
| Output High Voltage |
2.5 |
- |
- |
Volts |
IOH = -20 mA |
| Output Low Voltage |
- |
- |
0.8 |
Volts |
IOL = 20 mA |
| Propagation Time |
- |
- |
15 |
ns |
- |
CONNECTORS
| PRODUCT |
DRIVER HEADER |
CONNECTOR MATES WITH |
| PC5-H10 |
TE# 103309-1 |
CON-C10* |
* US Digital part number. For more information see the Cables / Connectors page.
PIN-OUTS
PC5-H10 BROADCOM / AVAGO COMPATIBLE OUTPUT
| PIN |
DESCRIPTION |
| 1 |
No connection |
| 2 |
+5VDC power |
| 3 |
Ground |
| 4 |
No connection |
| 5 |
A- channel |
| 6 |
A+ channel |
| 7 |
B- channel |
| 8 |
B+ channel |
| 9 |
Index- |
| 10 |
Index+ |
 |
PRODUCT CHANGE NOTIFICATIONS
| Title |
Date |
Description |
Download |
| PC3-H5, PC4, PC5 and PC6 Laser Markings - PCN 6228 |
9/27/2017 |
This notification is to inform our customers of a product marking change for the PC3-H5, PC4, PC5, and PC6 products. The purpose for this change is to create a more robust solution by utilizing laser marking versus the current paper label solution. The products effected will now be laser marked. |
Download |
Additional Information
Product Notes
-
Cables and connectors are not included and must be ordered separately.
-
US Digital® warrants its products against defects in materials and workmanship for two years. See complete warranty for details.
Datasheets
Related
3D Model Downloads
Please
configure your product first
to download a 3D model.
(Note: The formats below will become links if there are 3D models available.)
-
SolidWorks Format
-
IGES Format
-
Parasolid Format
-
STEP Format
Product Configurator
Our products are not currently available for direct online purchase. To place an order please contact us directly with your part number.
For purchasing or volume discounts, please configure the part above, then use the completed part number and contact us!
Feedback
US Digital's mission is a commitment to quality and constant improvement. If you find an error to a product on this page, please let us know!
