XC-56
The XC-56 is a monochrome camera module that incorporates a 1/3 type progressive scan CCD. The XC-56 has VGA-class resolution (647 (H) × 493 (V)) output at 30 frames/sec. and 60 frames/sec. by the binning function.
Key Features
features
• 1/3 type progressive scan CCD
• Non-TV format
• Square pixel/ Full pixel read-out
• VGA-class resolution image output, 30 frames/sec
• Partial scanning function
• External trigger shutter
- Restart/Reset
- Mode 1 (Non-reset mode)
- Mode 2 (Reset mode)
• Various settings are available on the rear panel
specifications
Image device
1/3 type progressive scan IT CCD
Effective picture elements (H) × (V)
659 × 494
Effective lines (H) × (V)
647 × 493
Output image size (H) × (V)
VGA class ( 647 × 494 )
Cell size (H) × (V)
7.4 μm × 7.4 μm
Lens mount
C mount
Flange back
17.526mm
Sync system
Internal/External (automatically switched according to input signal)
External synchronization input/output*1
HD/VD (HD/VD level: 2 to 5 Vp-p, 75Ω)*
Allowable frequency deviation of external synchronization
±1% (in horizontal synchronous frequency)
H jitter
Less than 20 ns
Scan lines
525-line/236-line (Normal mode/ Binning mode)
Video output mode
Normal: 1 -line sequential output 29.97 fps / Binning: F2 -line sequential output 59.94 fps
Video output
1.0Vp-p, sync negative, 75Ω unbalanced
Horizontal frequency
15.734 kHz
Output signal frequency
29.97 Hz (Normal mode) 59.94 Hz (Binning mode)
Horizontal resolution
500TV lines
Sensitivity
400 lx F8 (γ= OFF, FIX GAIN (0 dB))
Minimum illumination
0.5 lx ( F1.4, γ= OFF, GAIN +18 dB )
Video S/N ratio
58 dB (GAIN 0 dB)
Gain
Fixed/Manually adjustable
Gamma
OFF (γ =1) (fixed)
White clip
820 mV ± 70mV
Shutter mode
Normal shutter, Restart/Reset, External trigger shutter (Mode 1/Mode 2)
Normal shutter speed
1/100, 1/125, 1/250, 1/500, 1/1,000, 1/2,000, 1/4,000, 1/8,000, 1/15,000 s
External trigger shutter
DIP switch settings: 1/100, 1/125, 1/250, 1/500, 1/1,000, 1/2,000, 1/4,000, 1/10,000, 1/25,000, 1/50,000, 1/100,000 s
Trigger pulse width settings: 1/4 to 1/100,000 s
External trigger
Polarity: +, Width: 2 μs to 250 ms, Input impedance: 10kΩ or more (H: +2 to 5.0V, L: 0 to +0.6V)
Partial scan
R/R mode Binning off: max: 120 fps (Effective line: 102)
Binning on: max: 180 fps (Effective line: 59)
External trigger Binning off: max: 120 fps (Effective line: 102)
(mode 1) Binning on: max: 180 fps (Effective line: 159)
Pin assignment
Correspondence to EIAJ compliant 12PIN connector pin assignment
Unavailable (No.8 pin: Trigger input (G), No.9 pin:
Trigger input, No.10 pin: GRD, No.11pin: +12V) Pins No.10 and 11 are not connected inside the camera
Power requirements
+12 V DC (range: +10.5 to +15.0 V)
Power consumption
1.5 W
Dimensions
29 (W) × 29 (H) × 30 (D) mm (not including projecting parts)
Mass
Approx. 50 g
Operating temperature
−5 to +45˚C
Storage temperature
−30 to +60˚C
Performance guarantee temperature
0 to +40˚C
Operating humidity
20 to 80% (no condensation)
Storage humidity
20 to 95% (no condensation)
Vibration resistance
10 G (20 Hz to 200 Hz 20 minutes for each direction–x, y, z)
Shock resistance
70 G
MTBF
88,044 hours (Approx. 10.1 years)
Regulatory compliance
UL6500, FCC/ICES-003 : ClassA, CE : EN61326, AS/NZ : EN61326
Supplied accessories
Lens mount cap (1), Operating instructions (1), Lens
accessories
Optional Accessories:
Compact camera adaptor
• DC-700CE
Tripod adaptor
• VCT-333I
12-pin camera cable (CE standard)
• CCXC-12P02N (2 m)
• CCXC-12P05N (5 m)
• CCXC-12P10N (10 m)
• CCXC-12P25N (25 m)
downloads
Sony XC Series Downloads
You may need to be logged in to have access to some documents.
*You may need to be logged in to have access to some documents.