HWACHEON Machinery Europe

Hi-TECH 700

Horizontal lathe with box guideways for Ø600 mm chucks

Hi-TECH 700 - Front side
Hi-TECH 700 - Tool presetter
Hi-TECH 700 - Turret and Tail stock
Hi-TECH 700 - Large Workpiece
Hi-TECH 700 - Heavy Duty Cutting
Hi-TECH 700 - Heavy machine bed with wide box guide ways and gear spindle
Hwacheon hand crafted box guide ways with Turcite coating
Hi-TECH 700 - Gear spindle
Hi-TECH 700 - Tail stock

The Hi-TECH 700 is designed for large workpieces and materials which are difficult to cut. The stable turret, the primary gear unit and the monolithic, solid cast iron bed with cast on and ground box guideways are superbly suited to machining particularly hard and tough materials.

The 45° slant bed has been constructed in order to ensure maximum rigidity and precision with minimal thermal distortion during continuous operation. The automatic gears ensure an enormous torque at low speeds.

Features: 
Box guide ways
Gear spindle
Driven tools
Slanted bed
NC Controls: 
Fanuc 0i
Siemens 828D

Horizontal lathe with box guideways for Ø600 mm chucks

The Hi-TECH 700 is designed for large workpieces and materials which are difficult to cut. The stable turret, the primary gear unit and the monolithic, solid cast iron bed with cast on and ground box guideways are superbly suited to machining particularly hard and tough materials.

The 45° slant bed has been constructed in order to ensure maximum rigidity and precision with minimal thermal distortion during continuous operation. The automatic gears ensure an enormous torque at low speeds.

Wide turret (optional)

A wider version of the Hi-TECH 700 turret can also be ordered. This has 12 stations, each of which has two tool holders, one behind the other. This means that long tools can be held in two holders, which has a positive impact on the cutting process in terms of stability and rigidity.

Highlights

  • High precision 37/30 or 45/35 kW spindle for hard turning
  • Chuck sizes: 15, 18, 21 or 24 inch
  • Rapid traverse speeds (X/Z): 18/18 m/min
  • Turret indexing time (1 Pos): 0.2 s
  • Extremely stable tail stock with a 150 mm diameter (MT#5)
  • Oil-cooled spindle and spindle bearings

Ergonomic design and extensive optional features

The user-friendly design of the Hi-TECH-700 is comfortable to work with, meaning that you can concentrate on what matters: producing high quality products whilst not wasting any time with laborious handling, and doing so under conditions of maximum workplace safety. The large number of optional features allows you to configure your machine according to your requirements in terms of performance and precision.

Configurations

Y MC
Hi-TECH 700 Optional
MC: Turret with Driven Tools | Y: Y axis | S: Sub spindle | L: Long bed version | XL: Extra Long bed version | A/B/C: Chuck and Bar size

Topic related

Technical Information

ItemUnitHi-TECH 700
Axis-Stroke (X / Y / Z)mm360 / - / 2050
Spindle powerkW37 / 30
Spindle speedrpm1800
Spindle torqueNm3071.1 / 2492.6
Rapid speedm/min18 / - / 18
Tool shankBMT-75 / BH
Number of tools12
Machine weightkg15000
Max. cutting diametermm680
Max. cutting lengthmm1986
Chuck-Sizemm380
Swing over bedmm900
Max. Bar sizemm116
Coolant tank vol.Liter300

All rights reserved, all indications without engagement, subject to modifications.

[node:title_field]