Mr. Thomas Yoon
+82-10-5380-0313
e-CAM130_CUTX1 - 13MP Jetson™ TX2/TX1 Camera Board
e-CAM130_CUTX1 - 13MP Jetson™ TX2/TX1 camera board is a 4-lane MIPI CSI-2 camera solution for NVIDIA® Jetson™ TX2/TX1 developer kit. The e-CAM130_CUTX1 Board uses 13MP custom Lens camera module based on AR1820 CMOS Image sensor from onsemi®. This camera daughter board can be directly interfaced to the NVIDIA® Jetson™ TX2/TX1 developer kit. The e-CAM130_CUTX1 is a 13MP color camera with the S-mount (also known as M12 board lens) lens holder.
The S-mount is one of the most commonly used small form-factor lens mounts for board cameras. The e-CAM130_CUTX1 is a two-board solution containing the camera module board based on 1/2.3" AR1820 CMOS image sensor from onsemi® and Adapter board to interface with Jetson™ TX2/TX1.
- Houses e-CAM130_CUMI1820_MOD - 13MP AR1820HS Color Camera Module
- High-speed 4-lane MIPI CSI-2 interface to connect with the CPU
- Plugs in to NVIDIA® Jetson™ TX2/TX1 Development Kit
- Leverages the 4-lane CSI-2 interface for maximum frame rate across all resolutions
- Maximum Image Transfer Rate
-
YUV422 VGA 60 fps HD (720p) 72 fps Full HD (1080p) 72 fps 4K/Ultra HD 30 fps 13MP 20 fps - Operating Voltage - 5V +/- 5%, Current - 450mA
- Operating Temperature Range : -30°C to + 85°C
- Power Consumption:
- Max : 1.92W
- Min : 1.50W
- Linux camera driver (V4L2) for 13MP MIPI CSI-2 camera module
- RoHS compliant
- Sample application for image capture & Preview
- Gstreamer-1.0 support for video recording and network streaming
- Board size( L x W x H): 75.03 mm x 40.18 mm x 25.6 mm (without Lens)
- Board Weight - 20 Grams (without lens)
26.5 Grams (with lens) - Launched on:
4K Camera Module Features:
Sensor:1/2.3" Optical form factor AR1820HS sensor with on-board high performance ISP.
Focus Type:Fixed focus
Resolution:18MP (however, e-CAM130_CUTX1 uses only 13MP)
Pixel size:1.25μm pixel with onsemi® A-PixHS™ which brings BSI technology and advanced pixel architecture
Sensor Active Area:4912(H) x 3684(V)
Responsivity:0.62 V/lux-sec (545nm)
SNR:36.3 dB
Dynamic Range:65.8 dB
Output Format:Uncompressed YUV422 format and Compressed MJPEG format
Shutter type:Electronic Rolling Shutter
Holder:S-Mount
ISP:External ISP
Array Size:The e-CAM130_CUTX1 supports only up to 4224x3156 pixels for 13MP
DFOV : 13M - 74°, 4K/1080p/720p - 69°, VGA – 72°
Linux camera driver:
Full-fledged Linux camera driver for MIPI CSI-2 camera module. The driver supports e-con's e-CAM130_CUTX1 on Jetson developer kit. The camera driver source code can be ported to any NVIDIA® Jetson™ TX2/TX1 platform and even to support the secondary MIPI CSI-2 interface of TX2/TX1.
- Supported Jetpack & L4T Version
-
- NVIDIA® Jetson™ TX2 - JetPack 3.3 L4T28.2.1
- NVIDIA® Jetson™ TX1 - JetPack 3.3 L4T28.2
- V4L2 Linux driver for MIPI CSI-2 camera module
-
- Video preview
- Still Image capture
- Camera controls via IOCTLs
- Sample application with source Code for Linux:
-
- Video Preview
- Still Image capture at selected resolutions
- Camera Controls
-
- Brightness
- Contrast
- Saturation
- White Balance (both manual and automatic)
- Gamma
- Gain
- Horizontal Flip
- Vertical Flip
- Sharpness
- Exposure (both manual and automatic)
- Digital Zoom
Please contact sales@e-consystems.com for any customization or porting of camera driver to your requirements.
Kit contents :
- e-CAM130_CUMI1820_MOD - 13MP MIPI Camera Module with lens
- Adaptor board
- SD Card
- Linux Driver & Sample Application
- Please contact sales@e-consystems.com for any customization or porting of camera driver to your requirements.
e-CAM130_CUTX1 Documents
Employee Login
