Mr. Thomas Yoon
+82-10-5380-0313
e-CAM31_TX2 - 3.4 MP Autofocus Liquid Lens NVIDIA® Jetson™ TX2/TX1 Camera Board
e-CAM31_TX2 is a 3.4 Mega pixel 4-lane MIPI CSI-2 liquid lens Auto focus camera board for NVIDIA® Jetson™ TX2 developer kit and it is also compatible with NVIDIA® Jetson™ TX1 developer kit. This camera is based on 1/3 inch AR0330 CMOS Image sensor from onsemi® with 2.2 µm pixel and A-Pix™ technology and an integrated high performance image signal processor (ISP). This S-Mount (M12) liquid lens camera enables autofocus with no mechanical moving part like VCM (Voice Coil Motors) will increase the lifetime and has an ability to focus and refocus in a matter of milliseconds.
This camera can be directly connected to camera connector(J22) on the NVIDIA® Jetson™ TX2 developer Kit. e-CAM31_TX2 is exposed as a standard V4L2 device and customers can use the V4L2 APIs to access this camera and control the same.
- Houses e-CAM31_MI0330_MOD - 3.4 MP Camera Module with S-mount lens holder
- High-speed 4-lane MIPI CSI-2 interface to connect with the CPU
- Plugs in to NVIDIA® Jetson™ TX2 and TX1 Developer Kit
- Maximum Image Transfer Rate
-
Resolutions Uncompressed YUV422 VGA 60 fps HD (720p) 60 fps Full HD (1080p) 60 fps 3MP 60 fps 3.4 MP 50 fps - Operating Voltage - 5V +/- 5%, Current - 270mA (Max)
- Operating Temperature Range : -30°C to +70°C
- Power consumption of Camera Board : 1.35W (Approx)
- Linux camera driver (V4L2) for 3.4 MP MIPI CSI-2 camera module
- Sample application for image capture & Preview
- Gstreamer-1.0 support for video recording and network streaming
- Board size( L x W x H): 75.03 mm x 40.18 mm x 25.6 mm
- Board Weight - 22 Grams (with lens)
- RoHS compliant
- Lightweight, versatile, and portable two-board solution
- Launched on:
Sensor:1/3" Optical form factor AR0330 CMOS Image sensor
Focus Type:Auto focus
Resolution:3.4 MP
Focus Distance:70mm to Infinity
Pixel size:2.2 µm x2.2 µm
Sensor Active Area:2304H x 1536V
Responsivity:2.0V/lux-sec
SNR:39 dB
Dynamic Range:69.5 dB
Output Format:Uncompressed YUV422 format
Shutter type:Electronic Rolling Shutter
Holder:S-Mount
ISP:External ISP
Controls:Auto white balance and Auto Exposure
Array Size:2304x1536
DFOV : 3.4 MP - 66° (with the lens provided by e-con)
Linux camera driver:
Full-fledged Linux camera driver for MIPI CSI-2 camera module. The driver supports e-con's e-CAM31_TX2 on Jetson developer kit. The camera driver source code can be ported to any NVIDIA® Jetson™ TX2 and TX1 platform and even to support the secondary MIPI CSI-2 interface of TX2 and TX1
- Supported Jetpack & L4T Version
-
- NVIDIA® Jetson™ TX2 - JetPack 3.3 L4T28.2.1
- NVIDIA® Jetson™ TX1 - JetPack 3.3 L4T28.2
- V4L2 Linux driver for MIPI CSI-2 camera module
-
- Video preview
- Still Image capture
- Camera controls via IOCTLs
- Sample application with source Code for Linux:
-
- Video Preview
- Still Image capture at selected resolutions
- Camera Controls
-
- Brightness
- Contrast
- Saturation
- White Balance (both manual and automatic)
- Gamma
- Gain
- Horizontal Flip
- Vertical Flip
- Sharpness
- Exposure (Manual, Automatic and ROI based Automatic)
- Focus (Manual, Automatic, Centre based Trigger & Auto, ROI Based Trigger & Auto)
- Digital Zoom
- Pan
- Tilt
- Note: Seperate software delivery package for NVIDIA® Jetson TX2 and TX1.
Please contact sales@e-consystems.com for any customization or porting of camera driver to your requirements.
Kit Contents:
- e-CAM31_MI0330_MOD - 3.4 MP Camera Module with lens
- Adaptor board
- SD Card
- Linux Driver & Sample Application
- Please contact sales@e-consystems.com for any customization or porting of camera driver to your requirements.
e-CAM31_TX2 Documents
Employee Login
