 |
2
 |
 |
| A2 |
|
 |
Germany |
ADE-WERK |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Navigation |
 |
|
|
|
Offer Profile
Actuator and Lifting Tables -
worldwide
The core of ADE's production spectrum is the design and development,
production and sale of linear electric actuators and scissor-lift platforms
for many different applications.
ADE linear actuators and lifting platforms are used by industry and trade in
medical and marine engineering, in aeronautics, packaging technology and
conveyor technique. In the automotive and aircraft industry they are used
for testing, simulation and solar energy plants.
|
|
|
|
Product Line Up
|
Actuator
A milestone in linear actuator development was the
introduction of ADE’s special designs for the operation of sluice gates and
weirs in shipping canals, since their first installation in 1995. Prior to
this most control mechanisms used in this sector were either hydraulic
cylinder operated or used conventional screw jacks with lead screw exposed
to the elements. Hydraulic cylinders with multiple connections for piping to
the motor driven power packs are labour intensive for maintenance and there
is frequently the risk of hydraulic fluid leakage. Similarly the exposed
threaded bar of screw jacks requires grease lubrication and is at best,
protected by a bellows. Using hydraulic cylinders or screw jacks in waterway
applications creates the risk of environmental pollution.
Contrast this with a totally enclosed electric linear actuator with
specially selected materials of construction, long-life internal mounted
screw drive and high specification gear motor drive, which has many
fundamental advantages.
- Lubricants cannot leak into the water due to the fully enclosed
design and high-grade seals employed.
- The linear push-pull forces are generated electro-mechanically
- Integrated adjustable controls provide for stroke adjustment and
control of maximum thrust force to provide precise control of gate
motion and firm closure.
- Maintenance costs reduced substantially due to high wearing life of
components and long interval lubrication.
- Standardised construction minimises spare part requirements,
especially in comparison with hydraulic cylinder actuation.
- High mechanical efficiency drive system combined with power used
only when operating (as against hydraulics) means lower energy costs
- Low noise emissions <60dB (A) possible
|
|
|
|
|
 |
Over 500 installations have now been supplied proving
many times over that ADE’s electric linear actuator designs are easy to
install, extremely reliable and very robust, sufficient to satisfy even the
most extreme operating conditions (e.g. fully submerged).
The many European references for ADE actuators in this demanding sector are
fully documented by the municipal and state authorities responsible for
shipping canals and waterways. This includes major shipping canal gates
(double gates).
- Gate drives for radial gate, compound gate, wedge roller gate,
rotating gate, etc.
- Weir drives for: fish gates, weir plates, etc.
- Bridge drives for: bridge actuation, bridge locking, etc.
- Lock gates for pleasure boats and flap gates
- Barrage drives for flood control gate
|
|
|
|
Linear Actuators - For Industry and special Designs for
canal sluice
|
|
|
|
LINEAR ACTUATORS STANDARD SERIES
up to 60kN
Basic equipment (all models):
Stainless Steel piston rod and trunnion pivot, piston rod with anti-rotation
guide and spherical rod-end or galvanised clevis.
Optional equipment:
- potentiometer
- impulse generator
- speedometer
- bellows or protective tube
- pedestal bearing
- various spindle pitches
- construction for outdoor use or with aggressive media
- safety nut, etc.
|
|
SPECIAL DESIGNS FOR CANAL SLUICE GATES AND WIRES
Performance potential of hydraulics - combined with:
- Low assembly costs
- Low maintenance costs
- Compact construction
- Environmentally friendly in accordance with
- the Federal Water Act
- High mechanical efficiency
- Integrated spring buffer
Design:
- with trapezoidal screw drive
- with ball screw drive
- with planetary roller screw drive
- torque monitoring
- integrated limit switches
- integrated path-measuring system
- Integrated analogue force measurement
- protection class: up to IP68 (protected against flooding)
- sound emission up to minimum 60dB(A) possible
Numerous references in the field of hydraulic engineering fully document
our high standards. These have been compiled in co-operation with the
responsible departments of Water and Shipping Administrations.
We offer customised designs and economically priced solutions, which will be
adapted to the specific needs of our customers
|
|
HEAVY MODEL RANGE
LINEAR ACTUATORS FOR HEAVY DUTY APPLICATIONS
|
|
|
|
Linear Drives - Simple Movement with low duty cycle times
|
|
|
|
Actuators
from 120 daN to 1000 daN, from 4mm/s to 46 mm/s
- ADE actuators contain a fully enclosed screw drive, which is powered by
a 12 or 24 volt DC motor.
- These are used in many areas of handling technology and in the medicine
and patient care sector.
- Typical applications are: automation equipment, door and window drives,
adjustable office furniture,
solar shading, ventilation flaps and in the patient sector.
- The range of force capacities and speeds mean that ADE actuators can
offer the optimum solution
for many applications.
|
|
Mini lifting drive
up to loads 1000 daN
- Drive unit with direct current gear motor for easy movement with a low
power-on time. Duty rating, max. 20%
- Construction with rotating trapezoidal threaded spindle (type "d")
or with stationary trapezoidal threaded spindle (type "s")
- Different sizes for different areas of application:
- Mini lifting drive MT-10-d 12 volt or 24 volt closed construction up to
max. 120 daN
- Mini lifting drive MT-10-s 12 volt or 24 volt open construction up to max.
120 daN
- Lifting drive MT-16-d 0-48 volt closed construction up to max. 1.000 daN
- Mini lifting drive MT-16-s 0-48 volt open construction up to max. 1.000
daN
|
|
|
|
|
|
Lifting Table
As the ADE spindle driven roller-cam scissor lift has
achieved an international reputation for quality and reliability since 1995,
a variant of the ADE roller-cam design, using hydraulic cylinder drive has
been introduced as well.
172 of these lift stations were recently selected by General Motors and
installed on the final assembly line at Lansing in Michigan USA.
The significant advantage of ADE’s roller-cam design is that the lift load
is translated into a virtually constant pull force over the entire lift
stroke. This means less resp. minimized wear and a higher mechanical
efficiency can be achieved. As a consequence, this design has been widely
adopted by systems integrators and the automotive industry as being
eminently suitable for continuous, high duty rated manufacturing.
|
|
|
|
|
|
ADE scissor lifts are in general guaranteed for 24 months
operation. Maintenance is limited to a single annual inspection. The
actuator drive assembly can be interchanged in no more than 15-20 minutes.
These are important factors which in addition to the inherent high quality
and reliability, explain the very considerable success of the roller-cam
scissor lift.
The more recent hydraulic cylinder drive ADE offers a variable speed, quiet
running hydraulic power pack or frequency inverter control. The most recent
development is a belt drive.
ADE roller-cam scissor lifts are now offered in three variants
Lead or ball-screw mechanical actuator drive
Hydraulic cylinder drive
Belt drive system
Service
Maintenance training can be provided on-site or at ADE works by a team
of experienced specialists. On-site assembly and commissioning support can
also be offered. A 24 hour contact service is available.
|
|
|
|
Scissor Lift Platform Systems - For demanding industrial
applications
|
|
|
|
Scissor lift platform
Up to 50 t load, up to 8 m lift
- Short assembly and maintenance times
- Durable welded construction
- High service life, even for rough, continuous operation
- Rapid interchange of all drive components
- The guided roller configuration ensures good guidance and a high lateral
stability.
- All bearings are lubricated for life, regreasable bearing version is
also available on request
- Easy to service design with exchangeable wear parts
- Suspension points at the centre of gravity for crane transport
- Maintenance supports for mechanically securing the upper frame
- Numerous accessories and special designs round off the product range
|
|
Roller cam scissor lift
max. load 10 t, max. lift
travel 3 m
- High positioning, accuracy and repeatability over the entire lifting
stroke
- Short assembly and maintenance times
- Linear driving load and lifting speed
- Optimised power requirement
- Construction with spindle, belt or hydraulic drive
- Durable welded construction
- High service life, even under rough, continuous operation
- Rapid interchange of all drive components
- The guided roller configuration ensures good guidance and a high
lateral stability
- All bearings are lubricated for life, regreasable bearing version is
also available on request
- Easy to service design with exchangeable wear parts
- Suspension points at the centre of gravity for crane transport
- Maintenance supports for mechanically securing the upper frame
- Numerous accessories and special designs round off the product range
|
|
Coil lift technology
Up to 50 t load, up to 8 m lift
- Short assembly and maintenance times
- Durable metal welded construction
available alternatives: prism, roll, or slotted prism construction
- High service life, even with rough, continuous operation
- Rapid interchange of all drive components
- The guided roller configuration ensures good guidance and a high lateral
stability
- All bearings are lubricated for life, regreasable bearing version is
also available on request
- Easy to service design with exchangeable wear parts
- Suspension points at the centre of gravity for crane transport
- Maintenance supports for mechanically securing the upper frame
|
|
|
|
|
|
Elevating platform with "4 scissor technology"
up to 10 t load, up to 8 m lift
- High positioning accuracy and repeatability over the entire lifting
stroke
- Extreme rigidity of the elevating platform, even where transverse
loading occurs due to the design with 4 independent scissor arms and the
provision of a scissor pivot bearing point at each corner of the upper
frame.
- Short assembly and maintenance times
- Linear driving load and lifting speed
- Optimized power requirement
- Construction with spindle, belt or hydraulic drive
- Durable welded structure
- High service life, even under rough, continuous operation
- Rapid interchange of all drive components
- All bearings are lubricated for life
- Easy to service design with exchangeable wear parts
- Suspension points at the centre of gravity for crane transport
- Maintenance supports for mechanically securing the upper frame
- Numerous accessories and special designs round off the product range
|
|
|
|
Handling - Scissor Lift Platform - For application in
handling systems
 |
|
|
|
|
|
Scissor Lift Platform - up to 8 t
load, up to 3.3 m lift
Scissor Lift Platform - up to 8 t
load, up to 3.3 m lift
- Robust design and reliable operation
- Variety of available accessories
- Low cost / high performance
- Fast delivery
- Custom designs available
|
|
|
|
SINGLE SCISSORS
Cases of application are from assembly stations for adjustment of the
ergonomically working height to stacking applications to load and unload trucks.
|
|
DOUBLE VERTICAL SCISSORS
This design is used, where grand vertical heights have to be bridged and
installation space is restricted.
|
|
THREEFOLD VERTICAL SCISSORS
This design is used, where grand vertical heights have to be bridged and
installation space is restricted.
|
|
|
|
DOUBLE HORIZONTAL SCISSORS
This design is applicable where high loads have to be lifted, where big
platforms are required and where the closed height is restricted.
|
|
LOW PROFILE SCISSOR LIFT
A pit for installation is not required, due to the minimal closed height.
Also available as double horizontal scissor system.
|
|
LOW PROFILE SCISSOR LIFT IN U-SHAPE
These lifters are designed to be loaded by means of a pallet truck.
Due to the extra-low design and the cut-out in the upper frame the load can be
set directly onto the platform.
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
3R
|
|
A 
