|
LeanTek® components
The LeanTek product range is built around three simple
principles: strength, multifunctionality and durability.
- Strength is an essential quality in the industrial environment: our
experience of the stresses placed on tubes and roller tracks over the years
have led to exclusive LeanTek solutions, such as riveting our roller tracks
and the use of 2 mm tubes.
- Multifunctionality is ensured through the mutual compatibility of all
components, which minimises impractical diversity.
- Durability comes primarily from the close attention paid to the
anti-corrosion coatings we apply to tubes and joints.
|
|
Tubes
The outer diameter of LeanTek tubes is 28.6 mm. 2 wall
thicknesses are offered: 1 mm for lightweight applications, and 2 mm for
heavier applications. Tubes are available in a wide range of standard
colours.
Since we manufacture our own tubes, we can supply them in any non-standard
colour you wish. LeanTek tubes are galvanized inside and out before
receiving their 0.8 mm thermoplastic coating in our own production plants.
|
 |
Connector joints
Trilogiq has been designing, developing and continually
improving the range of LeanTek joints ever since 1996.
The range of 3D® multi-directional connector joints is one of the results of
this constant quest for innovation. Each joint is manufactured by an
automated tool system; the only technique capable of delivering production
stability and regularity.
Joints are finished with a reinforced black zinc coating, which delivers an
attractive finish, guaranteed corrosion resistance (even in severe
environments) and high impact resistance.
|
|
Multifunction connectors
The F-M range of connectors is all about
multifunctionality. The profile common to all F-M connectors forms the basis
on which to mount all the roller tracks, lowering guides and flat-edged
tubes in the LeanTek range.
Our focus on multifunctionality and consistency means that the LeanTek
system is always fully modular.
F-M components are coated with an attractive white anti-corrosion zinc
finish that ensures durability.
|
|
Roller tracks and conveyor systems
Roller tracks are designed to cope with weight and
impact. These components are most often used for flow rack and supermarket
applications, but they are also required to ensure the downward flow of
components with minimum gradient and maximum smoothness, whilst offering
inherent strength and compact size.
LeanTek roller tracks respond to these requirements by offering some
exclusive features:
- Large diameter rollers (34 to 44 mm): These rollers are reinforced
for added impact resistance, and their large diameter makes for smoother
rotation.
- Rollers individually riveted into their tracks: this delivers
incomparable durability. The 3.6 mm spindle is big enough to absorb impact
and bear considerable weight.
- Density: The RR-400 is exceptional in more ways than one: it
features 28 rollers per meter, with just 1 mm between rollers. These
characteristics ensure remarkably regular descent, thus enabling shallower
gradients and saving space.
|
|
Accessories
LeanTek offers you a full range of accessories to expand
the breadth of functional applications even further. The lateral and central
descent guides are Trilogiq innovations.
Our Label holder strips, castors, floor anchorage systems and special
fastenings are all designed specifically to meet the industrial imperatives
of flexibility and adaptability.
|
|
|
C 
