SILVERSTONE
  • Offer Profile
  • Silverstone was established in 1995 and is today one of the biggest distributor for light material handling equipment in Europe.

    At Silverstone, we want to make it simple for our dealers and this through having a wide product assortment with a high availability, having a broad range of product knowledge as well as working a bit harder to satisfy our dealers.
Product Portfolio
  • Hand Pallet Trucks, Powered Pallet Trucks, High Lifters

      • Hand Pallet Trucks

          • Standard HPT single nylon, orange, 3312-1150

          • NEW Basic
            Pallet truck with single nylon wheels.

            Technical Data:
            • Capacity (kg) 2000
            • Fork dimensions B160 x L1150 x H (min/max)75/190
            • Outer fork width 520
            • Weight (kg) 50
            • Steering wheels Nylon
            • Load wheels Singel Nylon
          • Standard HPT single nylon, 4412-1150

          • Basic, light weighted pallet truck with single nylon wheels.

            Technical Data:
            • Capacity (kg) 2000
            • Weight (kg) 62
            • Steering wheels Nylon
            • Load wheels Singel nylon
            • Fork height (min/max) 85/200 mm
          • Standard HPT single PU, 4413-1150

          • Basic light weighted pallet truck with single PU wheels.

            Technical Data:
            • Capacity (kg) 2000
            • Weight (kg) 62
            • Steering wheels PU
            • Load wheels Single PU
            • Fork height (min/max) 85/200
          • Standard HPT boggie nylon, 4414-1150

          • Basic light weighted pallet truck with Bogie nylon wheels.

            Technical Data:
            • Capacity (kg) 2000
            • Weight (kg) 62
            • Steering wheels Nylon
            • Load wheels Bogie Nylon
            • Fork height (min/max) 85/200
          • Standard HPT boggie PU, 4415-1150

          • Basic light weighted pallet truck with Bogie PU wheels.

            Technical Data:
            • Capacity (kg) 2000
            • Weight (kg) 62
            • Steering wheels PU
            • Load wheels Bogie PU
            • Fork height (min/max) 85/200
          • HPT, single nylon, 6612-1000

          • 6612-1000
            • Heavy duty
            • RS Bearings
            • Lifts 2500 kg

            Maintenance free hand pallet truck with robust and strong chassis for rough and heavy handling. Normal lift function for easy lifting of heavy loads. Equipped with a built-in overload valve and maintenance free bushings. Lifts 7 mm/stroke.

            Closed hydraulic system with a one piece cast pump housing.
            5 year warranty on pump.

            Technical Data:
            • Capacity (kg) 2500
            • Fork dimensions B160 x L1000 x H(min/max)85/205
            • Outer fork width 540
            • Weight (kg) 84
            • Steering wheels Nylon
            • Load wheels Singel Nylon
          • HPT, single PU 6613-1150

            • Heavy duty
            • RS Bearings
            • Lifts 2500 kg

            This high quality maintenance-free pallet
            truck has a reinforced and durable chassis
            for tough and heavy handling. Normal lift
            functions for easy lifting of heavy loads.
            Equipped with a built-in overload valve and
            maintenance-free bushings. Lift speed 7
            mm/stroke.

            Closed hydraulic system with a one piece cast pump housing.
            5 year warranty on pump.

            Technical Data:
            • Capacity (kg) 2500
            • Fork dimensions B160 x L1150 x H (min/max)85/205
            • Outer fork width 540
            • Weight (kg) 81
            • Steering wheels PU
            • Load wheels Singel PU
          • HPT, double nylon 6614-1150

            • Heavy duty
            • RS Bearings
            • Lifts 2500 kg

            This high quality maintenance-free pallet
            truck has a reinforced and durable chassis
            for tough and heavy handling. Normal lift
            functions for easy lifting of heavy loads.
            Equipped with a built-in overload valve and
            maintenance-free bushings. Lift speed 7
            mm/stroke.

            Closed hydraulic system with a one piece cast pump housing.
            5 year warranty on pump

            Technical Data:
            • Capacity (kg) 2500
            • Fork dimensions B160 x L1150 x H (min/max)85/205
            • Outer fork width 540
            • Weight (kg) 84
            • Steering wheels Nylon
            • Load wheels Boggie Nylon
          • HPT, double PU 6615-1150

            • Heavy duty
            • RS Bearings
            • Lifts 2500 kg

            This high quality maintenance-free pallet
            truck has a reinforced and durable chassis
            for tough and heavy handling. Normal lift
            functions for easy lifting of heavy loads.
            Equipped with a built-in overload valve and
            maintenance-free bushings. Lift speed 7
            mm/stroke.

            Closed hydraulic system with a one piece cast pump housing.
            5 year warranty on pump.

            Technical Data:
            • Capacity (kg) 2500
            • Fork dimensions B160 x L1150 x H(min/max)85/205
            • Outer fork width 540
            • Weight (kg) 85
            • Steering wheels PU
            • Load wheels Boggie PU
          • Galvanized PT. Boggie 540 x 1150 HPG20S

          • The galvanized truck is a “low cost”
            alternative to the stainless truck. The warm
            galvanized truck can “heal” mechanical
            scratches, means less corrosion. Same
            equipment as the stainless truck, but no grease nipples.

            Technical Data:
            • Capacity (kg) 2000
            • Fork dimensions B160 x L1150 x H(min/max)85/205
            • Outer fork width 540
            • Weight (kg) 75
            • Steering wheels Nylon
            • Load wheels Boggie Nylon
            • Fork height (min/max) 85/205
          • Low profile HPT, W=540,L=1150 HPL20S

            • Low profile
            • 51 mm

            This low profile pallet truck is only 51 mm
            high in its lowest position. Used for extra low pallets.

            Reinforced forks and chassis enables this low profile version.

            Technical Data:
            • Capacity (kg) 1500
            • Fork dimensions B160 x L1150 x H(min/max)51/175
            • Outer fork width 540
            • Weight (kg) 72
            • Steering wheels PU Ø180x50
            • Load wheels Boggie PU Ø50x93
            • Fork height (min/max) 51/165 mm
          • Stainless HPT,tandem nylon,540

          • Made of acid proof stainless steel, to meet the tough
            demands in wet handling and corrosive applications. All
            parts are made of stainless steel incl. pump, chassis,
            forks, handle, push rod, bushings, bearings, pins and bolts.
            Overload valve, maintenance-free bushings/bearings (RS),
            protected and sealed hydraulics and 13 grease nipples, to ensure a long life.

            Technical Data:
            • Capacity (kg) 2000
            • Fork dimensions B160 x L1150 x H(min/max)85/205
            • Outer fork width 540
            • Weight (kg) 75
            • Steering wheels Nylon
            • Load wheels Boggie Nylon
            • Fork height (min/max) 85/205
          • HPT, rubber/singel nylon Q7712-1150

            • Lifts 2300 kg
            • Quick Lift 25 mm/stroke
            • RS Bearings
            • Ergonomic Handle

            Popular maintenance-free pallet truck
            with quick lifting system, overload valve and
            maintenance free bushings. Robust and basic
            design to ensure long life. 5 year warranty.

            Option:
            • Foot brake for improved safety
            • Single or bogie wheels of N/PU. Double entry/exit rollers.
            Technical Data:
            • Capacity (kg) 2300
            • Fork dimensions B150 x L1150 x H(min/max)85/205
            • Outer fork width 530
            • Weight (kg) 72
            • Steering wheels Gummi
            • Load wheels Singel Nylon
          • HPT, rubber/singel PU Q7713-1150

            • Lifts 2300 kg
            • Quick Lift 25 mm/stroke
            • RS Bearings
            • Ergonomic Handle

            Popular maintenance-free pallet truck
            with quick lifting system, overload valve and
            maintenance free bushings. Robust and basic
            design to ensure long life. 5 year warranty.

            Option:
            • Foot brake for improved safety
            • Single or bogie wheels of N/PU. Double entry/exit rollers.
            Technical Data:
            • Capacity (kg) 2300
            • Fork dimensions B150 x L1150 x H(min/max)85/205
            • Outer fork width 530
            • Weight (kg) 73
            • Steering wheels Gummi
            • Load wheels Singel PU
          • HPT, rubber/double nylon Q7714-1150

            • Lifts 2300 kg
            • Quick Lift 25 mm/stroke
            • RS Bearings
            • Ergonomic Handle

            Popular maintenance-free pallet truck
            with quick lifting system, overload valve and
            maintenance free bushings. Robust and basic
            design to ensure long life. 5 year warranty.

            Option:
            • Foot brake for improved safety
            • Single or bogie wheels of N/PU. Double entry/exit rollers.
            Technical Data:
            • Capacity (kg) 2300
            • Fork dimensions B150 x L1150 x H(min/max)85/205
            • Outer fork width 530
            • Weight (kg) 74
            • Steering wheels Gummi
            • Load wheels Boggie Nylon
          • HPT, rubber/double PU Q7715-1150

            • Lifts 2300 kg
            • Quick Lift 25 mm/stroke
            • RS Bearings
            • Ergonomic Handle

            Popular maintenance-free pallet truck
            with quick lifting system, overload valve and
            maintenance free bushings. Robust and basic
            design to ensure long life. 5 year warranty.

            Option:
            • Foot brake for improved safety
            • Single or bogie wheels of N/PU. Double entry/exit rollers.
            Technical Data:
            • Capacity (kg) 2300
            • Fork dimensions B150 x L1150 x H(min/max)85/205
            • Outer fork width 530
            • Weight (kg) 75
            • Steering wheels Gummi
            • Load wheels Boggie PU
          • HPT, nylon/singel nylon Q7716-1150

            • Lifts 2300 kg
            • Quick Lift 25 mm/stroke
            • RS Bearings
            • Ergonomic Handle

            Popular maintenance-free pallet truck
            with quick lifting system, overload valve and
            maintenance free bushings. Robust and basic
            design to ensure long life. 5 year warranty.

            Option:
            • Foot brake for improved safety
            • Single or bogie wheels of N/PU. Double entry/exit rollers.
            Technical Data:
            • Capacity (kg) 2300
            • Fork dimensions B150 x L1150 x H(min/max)85/205
            • Outer fork width 530
            • Weight (kg) 73
            • Steering wheels Nylon
            • Load wheels Singel Nylon
          • HPT, nylon/double nylon Q7717-1150

            • Lifts 2300 kg
            • Quick Lift 25 mm/stroke
            • RS Bearings
            • Ergonomic Handle

            Popular maintenance-free pallet truck
            with quick lifting system, overload valve and
            maintenance free bushings. Robust and basic
            design to ensure long life. 5 year warranty.

            Option:
            • Foot brake for improved safety
            • Single or bogie wheels of N/PU. Double entry/exit rollers.

            Technical Data:
            • Capacity (kg) 2300
            • Fork dimensions B150 x L1150 x H(min/max)85/205
            • Outer fork width 530
            • Weight (kg) 75
            • Steering wheels Nylon
            • Load wheels Boggie Nylon
          • HPT with scale. ZF20S

            • Electronic scale
            • Capacity 2000 kg

            Equipped with electronic scale.
            Stationary and mobile weighing can be used also as a normal pallet truck.
            Accuracy is 0,1% of the total weight, 1 kg graduation. IP65.
            Four load cells for accurate weighing even when loads are uneven.
            Tara function to add on or withdraw from net weight.
            Weighing device powered with 4 pcs 1,5V type AA batteries.
            Display turns off automatically after 3 min in standby position.

            Technical Data:
            • Capacity (kg) 2000
            • Fork dimensions B180 x L1150 x H(min/max)85/205
            • Outer fork width 555
            • Weight (kg) 117
            • Steering wheels PU
            • Load wheels Boggie PU
          • HPT with scale and printer ZFP20S

            • Electronic scale
            • Capacity 2000 kg
            • Thermo printer.

            Equipped with electronic scale.
            Stationary and mobile weighing can be used also as a normal pallet truck.
            Accuracy is 0,1% of the total weight, 1 kg graduation. IP65.
            Four load cells for accurate weighing even when loads are uneven.
            Tara function to add on or withdraw from net weight.
            Weighing device powered with 4 pcs 1,5V type AA batteries.
            Display turns off automatically after 3 min in standby position.

            ZFP20S is equipped with thermo printer.
            • Roll diameter: 40 mm
            • Warning signals: No battery, no paper, low temperature
            Technical Data:
            • Capacity (kg) 2000
            • Fork dimensions B180 x L1150 x H(min/max)85/205
            • Outer fork width 555
            • Weight (kg) 118
            • Steering wheels PU
            • Load wheels Boggie PU
        • Powered Pallet Trucks

            • Semi-Electric pallet-truck T20-15EHJ

              • Semi-electric
              • Maintenance free battery
              • Built-in charger

              Smooth and user-friendly, semi-electric pallet truck with a manual lifting function.
              Maintance free, built-in 24V/30Ah battery, giving 3 hours effective usage.
              Built-in charger.

              Technical Data:
              • Capacity (kg) 1500
              • Fork dimensions B150 x L1150 x H(min/max) 85/200
              • Outer fork width 560
              • Weight (kg) 140
              • Steering wheels PU
              • Load wheels PU
              • Lift height 85-200 mm
              • Battery (V/Ah) 24/30
              • Type of drive control DC
              • Steering system CURTIS
            • Full-Electric pallet-truck T20-15ET2

              • Compact and user-friendly design
              • Energy-efficient
              • Controller hibernation mode, automatically shuts off to save energy
              • Battery meter and key switch positioned at the tiller arm ensuring better observation
              • Maintenance free battery
              • Electromagnetic brakes

              Affordable, user-friendly and low energy exhausting full-electric pallet truck. Capacity 1500 kg.  

              Technical Data:

              • Capacity (kg) 1500
              • Ground clearance 30 mm
              • Fork dimensions 50/150/1150
              • Adjustable fork width (mm) 560/685
              • Length to face of fork 488
              • Weight (kg) 205
              • Axle loading with load, operator/load side 550/1155
              • Axle loading without load, operator/load side 180/25
              • Tyre type PU/PU
              • Steering wheels Ø210x70
              • Load wheels 2x Ø78x60
              • Number of wheels (x=driving wheel) 1x /4 / 1x/2
              • Load center 600 mm
              • Lowest height, working platform (mm) 80
              • Total length 1638 mm
              • Total width 568/685 mm
              • Lift height 115 mm
            • Electric pallet-truck, scale T20-15ET-SC

            • T20-15ET-SC holds the same advantages as its forerunner T20-15ET, and is furthermore equipped with a scale.

              • Compact design
              • Ergonomic handle
              • Reliable CURTIS steering system
              • Battery indicator & emergency brake

              Affordable full-electric pallet truck with many advantages.
              Built-in charger with a 24V/85 Ah maintenance free battery which lasts a full working day. Curtis controller provides reliability and is easily adapted to the operator. Electromagnetic disc brake ensures that braking is always safe and reliable. A throughout safety thinking have among many things resulted in a creep function and an automatic decrease of speed at sturdy or sudden turnings. Ergonomically designed handle and controls makes the machine comfortable and easy to operate. Friendly to operator’s arms and shoulders. Machine can handle most pallets and has a capacity of 1500 kg.

              The scale

              • With backlight and tara function.
              • Addition function
              • Precision 1 kg
              • Equipped with 4 load cells
              • Battery

              Perfect for:
              • Moving goods
              • Work shops
              • Stores
              • Warehouses
              • Trucks
            • El. P-T.with sup. wheels, 1000 T20-15ETS

              • News: Better battery capacity!
              • With two support wheels
              • Reddot design award
              • Ergonomic handle
              • Reliable CURTIS steering system
              • Battery indicator & emergency brake
              • 1000 or 1150 mm fork length

              Affordable full-electric pallet truck with many advantages.
              Two support wheels enhance stability and safety.
              Built-in charger with a 24V/85 Ah maintenance free battery which lasts a full working day. Curtis controller provides reliability and is easily adapted to the operator. Electromagnetic disc brake ensures that braking is always safe and reliable. A throughout safety thinking have among many things resulted in a creep function and an automatic decrease of speed at sturdy or sudden turnings. Ergonomically designed handle and controls makes the machine comfortable and easy to operate. Friendly to operator’s arms and shoulders. Machine can handle most pallets and has a capacity of 1500 kg. Available with 1000 or 1150 mm forks.


              Perfect for:
              • Moving goods
              • Work shops
              • Stores
              • Warehouses
              • Trucks
            • Full-Electric pallet-truck T20-18ET

            • T20-18ET is as strong and smooth (and holds the same advantages) as its forerunner, but with a capacity of 1800 kg.

              • Fast (up to 5,8 km/h)
              • 10 ° gradeability
              • ZAPI steering system
              • AC drive control
              • Battery indicator & emergency brake

              Compact designed full electric pallet truck with high performance.
              Maintenance free AGM-battery, 2x12V/85 Ah will last for 4 effective working hours after every charge cycle. Built-in charger. Zapi electronic control system which can be tuned to operators profile. Electromagnetic disc brake ensures that braking is always safe and reliable. Integrated “turtle speed” when handle bar is tilted 15 degrees which enables precision drive in narrow spaces.

              Perfect for:
              • Moving goods
              • Work shops
              • Stores
              • Warehouses
              • Trucks
            • Full-Electric PT, forks 2400 T20-25RA2350

              • Fast (8,5 km/h)
              • Compact design
              • Foldable handles
              • Foldable, chock wave absorbing rider stand
              • 280 Ah industry battery
              • AC drive control
              • Central filling

              Silverstone T20-25RA2350 is a stand-on pallet mover for quick movements of goods. Latest generation AC motor technology ensures good performance and high security.

              Regenerative, electromagnetic brakes provides good performance and reduces wear-out. High quality components to achieve the best operating economy, e.g. lifting motor from Bucher. A travel speed of 8.5 km/h provides efficient and fast transportations. 280 Ah battery enables T20-20RA2350 to operate a full working day. Even more powerful batteries are available if needed.

              Perfect for:
              • Warehouses
              • Work shops
              • Trucks
              • Terminals
            • Walkie TE20S

              • Electronic Control
              • Long Handle (900 mm)
              • 210Ah/24 V

              Compact design and small dimensions for narrow aisles and tight handling. Electric lifting, long and multi-function handle, this makes the truck run easily and smoothly.
              The CURTIS 1207A programmable controller makes the truck run safely and to your demands, incl. step less speed.
              Safe and reliable operation, long and trouble-free life time and more working hours per charging.
            • Tow Tractor TW-1DC

            • Mini tractor

              TW-1DC is developed to ensure the best ergonomy during handling of e.g. different types of lorries.

              TW-1DC has a 1000 kg towing capacity and air filled rubber wheels.
              The steering handle is adjustable in three different angles, assuring the best ergonomy.
              TW-1DC is equipped with 24V/50Ah maintenance free batteries and built-in charger.
              CURTIS steering system makes TW-IDC very reliable.
              Flexible towing arm with automatic return to starting position.
              Standard bracket is included, but can be adjusted according to customer requirements.
          • High Lifters

              • High Lifter, 520x1150 S1000

              • Manual pump

                Has a telescopic 2-stage lifting cylinder. Automatic quick lift function up to 150 kg loads, double lifting speed. This model is also available with 1500 mm forks: S1000-15

                • Manual pump.
                • Polyurethane tyres.

                Technical Data:
                • Capacity (kg) 1000
                • Weight (kg) 115
                • Fork height (min/max) 800
                • Lift height 85-800 mm (min-max)
                • Lifting speed (mm/stroke) 18 / 40
              • High Lifter,520x1500 S1000-15

              • Manual pump

                Has a telescopic 2-stage lifting cylinder. Automatic quick lift function up to 150 kg loads, double lifting speed.

                • Manual pump.
                • Polyurethane tyres.

                Technical Data:
                • Capacity (kg) 1000
                • Fork dimensions B160 x L1500
                • Outer fork width 520
                • Weight (kg) 135
                • Fork height (min/max) 85-800 mm
                • Lift height 800 mm
                • Lifting speed (mm/stroke) 18 / 40
              • EL High-lifter, PU/PU SE1056

              • Electric pump

                Compact and easy to operate. Built in charger, with the largest battery as standard (60Ah/12V). Gives many working hours per charging. SE1056 lifts and lowers forks very quickly.
                • Electric pump.
                • Polyurethane tyres.

                Technical Data:
                • Capacity (kg) 1000
                • Weight (kg) 150
                • Fork height (min/max) 85-800 mm
                • Lift height 85-800 mm (min-max)
                • Lifting speed (mm/sec) 42 / 73
              • Man. High-lifter, PU/PU SM1056

              • Manual pump

                World class lifter. High performing lifter with a single lifting cylinder and tall upper part which makes this high lifter very reliable and easy to operate.
                • Manual pump.
                • Polyurethane tyres.

                Technical Data:
                • Capacity (kg) 1000
                • Fork dimensions B160 x L1190
                • Outer fork width 560
                • Weight (kg) 128
                • Fork height (min/max) 85-800 mm
                • Lift height 800 mm
                • Lifting speed (mm/stroke) 12 / 28
            • Light Lifters, Manual Stackers, Electric Stackers, Order Pickers, Forklifts

                • Light Lifters

                    • Double Spindle el E-DS

                    • Diameter= Ø47 mm
                      Length= 450 mm
                      CC distance= 200 mm
                    • Reel Rotator el E-RR

                    • Roll inner Ø= 74-80 mm
                      Roll outer Ø= 500 mm
                      Roll length= 250 mm
                    • Single Spindle el E-SS

                    • Diameter = Ø 47 mm
                      Length = 600 mm
                    • "V" Block E-VB

                    • Size= 400x400 mm
                      Height= 80 mm
                    • Electric Light Lifter, 100kg E100

                    • Very flexible and easy-to-operate electric light lifter.

                      Capacity 100 kg.
                      Designed to reviel back, neck and shoulders from all types of lifting work from floor level up to head level. Lift/lowering system with electrical motor, chain drive, electronic regulation of lift/lowering incl.soft start/stop, electric overload protection, portable and adjustable hand control unit, maintenance free/sealed battery, automatic built-in battery charger, hand control cable and charger cable. Standard support legs are 105 mm high.
                      Platform is made of polypropylene (PP).
                      Size of platform (LxWxT): 480x600x15 mm

                      Also available with low profile legs (85 mm).

                      There are demands from the Work Environment Authorities and the EC-directives when it comes to rules for lifting. Also very light lifting or wrong working positions can expose body for injuries.
                    • Hand Winch Lifter, 100kg M100

                    • With platform.

                      Capacity 100 kg.

                      Operated by a manual hand winch and a
                      steel wire which gives an accurate and
                      fast lift/lowering function. The automatic
                      brake system ensures a safe lowering. 4
                      castor wheels. Roll attachment options
                      available.

                      Platform size (LxW): 480x600 mm
                    • Hand Winch Stacker, 120kg PM120

                    • With forks.

                      Capacity 120 kg.

                      The winch stacker has a very low weight compared to the rated lift capacity, therefore it is very handy and easy-to-use for the operator. It is equipped with adjustable forks for half size pallets, hand winch for lifting and lowering. Large sized rubber rear wheels and small front PU castor wheels, hand controlled brake.

                      Adjustable width: 345-485 mm
                  • Manual Stackers

                      • Manual Stacker, RED LH=1500 EB1015-R

                      • Basic manual stacker.

                        Capacity 1000 kg.
                        Max. lifting height 1500 mm.
                        Price worthy manual stacker with 1-stage lifting mast. Lifting speed 12 mm/stroke.
                        Capacity 1000 kg.
                        Color: Red.

                        Technical Data:
                        • Capacity (kg) 1000
                        • Weight (kg) 210
                        • Tyre type Nylon
                        • Steering wheels Ø150x55 mm
                        • Load wheels Ø78x80 mm
                        • Load center 575 mm
                        • Lift height 90-1500 mm (min-max)
                        • Turning radius 1200 mm
                        • Lifting speed (mm/stroke) 12
                      • "ECO" Manual Stacker, LH=900 ES1009

                        • Easy to pump
                        • Unique Quick lift system
                        • Quick lift 45 mm/stroke

                        This stacker has a welded and reinforced chassis for heavy loads, 2-stage lifting masts made of C-section profiles, dual chains and single lifting cylinder, fork carriage and wheels. Sealed hydraulic system with protected pump and built-in overload valve. This gives a long and trouble free lifetime. It has a unique, very easy to pump quick lifting system which lifts 45 mm/stroke when in quick position. The stacker applies to EN1757.
                        Free lift.

                        Nylon wheels, roller bearings (RS), parking brake and foot protection on all wheels.

                        Technical Data:
                        • Capacity (kg) 1000
                        • Weight (kg) 210
                        • Steering wheels Ø150x40 mm
                        • Load wheels Ø80x70 mm
                        • Load center 585 mm
                        • Lift height 80-900 mm (min-max)
                        • Turning radius 1360 mm
                        • Lifting speed (mm/stroke) 45-12,5
                        • Outer dimensions 1605x840x1395
                      • Hand stacker, 1500mm KS1015

                      • Manual stacker with double action pump cylinder.
                        Capacity 1000 kg.
                         
                        Popular hand stacker with a double action pump cylinder for quick lifting. Pull handle is connected by chain to steering wheel, which makes this stacker very easy to maneuver, turning radius 180 degrees.
                        Applies to EN1757.
                      • Ergo Tilt, C=1000kg LT0890

                      • Lateral tiller stacker.

                        Capacity 800 kg (400 kg tilted)
                        This stacker is designed to give the user an ergonomically correct position to reach loads easily without the necessary of bending down or stretching up. Forks can be tilted 20 degrees both left- and right- sides by winding function. It has a very slim, but still very strong, construction. It’s equipped with automatic quick lifting system, which gives 4 times faster lifting when load is below approx. 150 kg. Applies to EN1757.
                      • Hydraulic mini stacker,LH=1100 ST400

                        • Hydraulic mini stacker.
                        • Capacity 400 kg.
                        • Max. lifting height 1100 mm.

                        The hydraulic stacker is equipped with both fixed forks and a lose, chromed platform for multipurpose use. You can handle half size pallets and/or use it as a mobile lifting table. Manual stacker with foldable foot pump lever for lifting and manual turning knob for lowering.

                        • Platform size (LxW): 650x580 mm
                        • Inner measure between supporting legs: 370 mm
                        • Inner dimension between forks: 350 mm
                        • Measure from floor to upper part of supporting leg: 75 mm
                    • Electric Stackers

                        • Electric Stacker, Initialift ES08-1600WAI

                        • Electric stacker with initial lift
                          • INITIAL LIFT
                          • LONG STEERING ARM FACILITATES maneuverability
                          • COMPACT DESIGN
                          • BUILT-IN CHARGER (220V)
                          • MAINTENANCE FREE BATTERIES (224AH)


                          Compact walkie stacker, perfect for order picking, transportation and stacking up to 1600 mm height. The mono mast gives the worker a good sight over the load and forks. An ergonomic steering arm with easily accessible controls facilitates handling. The stacker is equipped with a rubber steering wheel which results in a good grip. The compact design makes the stacker optimal for trucks and in narrow warehouses.

                          Suits perfectly for:
                          • Trucks
                          • Warehouses
                          • Shops
                          • Small scale industries
                        • Full-Electric Stacker ES10-1600

                        • Full-electric walkie.
                          • Good visibility while operating
                          • Long steering arm facilitates navigation
                          • Compact design
                          • Curtis steering system
                          • Built-in charger
                          • Maintenance free batteries
                          • Lifting height 1600 mm
                          • Electromagnetic brakes

                          Silverstone ES10-series are three compact electric stackers suitable for light material handling in several places such as shops, warehouses, small industries and such. Ergonomic controls, maintenance free batteries and built in charger makes them all very easy to operate and do maintenance on.

                          Economical and cost effective
                          It is not only the purchase price that is attractive on the new Silverstone ES10-series for light material handling. These stackers are all built with well proven components which are easily accessible. This ensures minimal maintenance costs. Forks moves quick up and down, which combined with good walking speed, increases productivity.

                          Safe
                          Raising and lowering features are easily accessible on the well-designed steering head. This allows the driver to fully concentrate on the load and stacking movements. The control handle is positioned in a way that provides better visibility for both driving and stacking.
                          A long tiller arm with low attachment point provides good safe distance between operator and machine, also it increases maneuverability.

                          Light weighter
                          Silverstone ES10-series stackers are compact, slick and light weighted. This allows both running and stacking in places where it might not otherwise possible, such as entresols, narrow aisle or some floors that cannot withstand the burden of a large stacker.
                        • Full-Electric Stacker, red ES10-3300ESJ

                        • Affordable full-electric stacker with 3300 mm lifting height.

                          Operator type: walkie
                          CURTIS drive system.
                        • Electric Stacker, EPS ES14-3300RAS

                        • Cost effective stacker with the latest technology.
                          • With EPS
                          • Lifting height up to 3,2 m
                          • High safety
                          • Also available without EPS
                          • AC drive control

                          Extraordinary Total Economy
                          Silverstone stackers with ride-on platform are equipped with the latest technology in terms of engine, steering and brakes. A well proven system of AC motors and ZAPI control electronics provide top-class performances. This combined with an attractive purchase / lease / rent price and long service intervals ensures an incredibly good total economy.

                          Performance to gain high productivity
                          Maximum speed of 8.5 km/h for fast driving. The lifting and lowering function has good performance. Overall this means no unnecessary loss of time.

                          Safety in focus
                          In addition to the right placed and ergonomic controls Silverstone full electric stackers are all equipped with many safety features. Among others, automatic speed reduction when forks are lifted over 500 mm, safety stop, regenerative & electromagnetic brakes, roll-back stop which provide safety at work on slopes, side protection for the operator, good visibility through the mast.
                        • Full-Electric Stacker, EPS ES16-5000RAST

                        • Cost effective stacker with the latest technology.
                          • With EPS
                          • Lifting height up to 5 m
                          • High safety
                          • Also available without EPS
                          • AC drive control

                          Extraordinary Total Economy
                          Silverstone stackers with ride-on platform are equipped with the latest technology in terms of engine, steering and brakes. A well proven system of AC motors and ZAPI control electronics provide top-class performances. This combined with an attractive purchase / lease / rent price and long service intervals ensures an incredibly good total economy.

                          Performance to gain high productivity
                          Maximum speed of 8.5 km/h for fast driving. The lifting and lowering function has good performance. Overall this means no unnecessary loss of time.

                          Safety in focus
                          In addition to the right placed and ergonomic controls Silverstone full electric stackers are all equipped with many safety features. Among others, automatic speed reduction when forks are lifted over 500 mm, safety stop, regenerative & electromagnetic brakes, roll-back stop which provide safety at work on slopes, side protection for the operator, good visibility through the mast.
                        • Double-Pallet Stacker, 3300 mm FD1533

                        • Stacker with lifting support legs for double pallet handling.
                          High comfort tiller grip from Germany, REMA,
                          reduces tiredness and improves productivity.

                          Heavy-duty design with top quality mast construction.
                          Powerful drive and power unit made in Europe. Electronic control system from Curtis. Confirms to EN1757-1:2001,
                          EN1726.
                        • Semi el.stacker, LH=900 MS1009

                          • Semi-electric stacker.
                          • Capacity 1000 kg.

                          Applications with intensive handling and continuous lifting requires high capacity electric stackers. Compact design and small turning radius. Fast lifting/lowering speeds. Easy and smooth steering makes the stacker safe and easy to operate. Our MS-range is therefore the perfect choice for high productivity requirements in confined spaces. Nylon wheels. Overload valve. Long and trouble free lifetime.

                          Service-friendly assembly of hydraulics, electrics and batteries.
                          Large battery, 120Ah/12V, for many working hours per charging.
                          European power unit.

                          The stacker applies to EN1726-1:2001.
                        • El.-ministacker,LH=1500 ST400-1500-EL

                          • Electric stacker.
                          • Capacity 400 kg.
                          • Max. lifting height 1500 mm.

                          Electric stacker with battery 74Ah/12V, built-in charger, electric motor (DC) and pump for more ergonomic operation. Overload valve for overload protection, maintenance free bushings and bearings (RS). Rear castor wheels (PU) with foot brake.

                          Platform size (LxW): 650x580 mm
                          Inner measure between supporting legs: 370 mm
                          Inner dimension between forks: 350 mm
                          Measure from floor to upper part of supporting leg: 75 mm
                      • Order Pickers

                            • Order Picker CK-05

                            • High quality oder picker.
                              • Working height up to 5 m
                              • Compact and easy to navigate
                              • 1358 mm turning radius
                              • AC drive control
                              • Maintenance free battery

                              Silverstone CK-05 solves many of the high altitude problems and tasks that you may face when working in industry, warehouse and retail shops. Order picking up to 5 m is no problem.

                              CK-O5 is simple and easy to maneuver thanks to the electric steering and well-designed controls. CK-05 only needs 1,8 meter wide aisle to make a U-turn.

                              Maintenance work on high levels often means bulky and wobbly ladders in action and yet stability and space is limited. With Silverstone CK-05 you drive around smoothly and easily with space for both materials and tools on board. Do you need to move around the properties while towing one or many carts? No problem, CK-05 solves this task with elegance and safe. CK-05 is equipped with non-marking polyurethane wheels.

                              Perfect for:
                              • Retail trade
                              • Warehouses
                        • Forklifts

                              • 3-Wheel forklift, 1,5ton, 4800 CPD15TVE48S

                              • 3-wheel rear driving electric forklift with the right balance of compavtness and power. Designed for safe and efficient navigation in tight spaces. Lifting height 4800 mm!

                                Performance
                                • AC driving motor with a high traction power and driving dynamivs, whether on uneven ground or when working on ramps.
                                • Maintenance free and highly efficient driving motor guarantee a long battery operating life
                                • AC technology on traction allows the truck to work more reliable and for longer shifts
                                • Powerful, hydraulic motor provides high torque for rapid but smooth lifting and lowering.
                                • The main hydraulic pump delivers on-demand power steering when steering is requested, which makes a low battery consumption


                                Safety
                                • Maintenance free braking system makes braking safe and comfortable
                                • Motor brake for regenerative braking during deceleration
                                • Automatically engaging parking brake for secure stopping, even on ramps
                                • Spacious driving room
                                • Large arc rear-view mirror with wide view
                                • Easily accessible emergency buttin
                                • Safety switch inside the seat stops the machine automatically when the driver leaves the seat
                          • Static Lift Tables, Mobile Lift Tables

                              • Static Lift Tables

                                  • Lift-table, 1300x820 mm, 1000 kg HD1000

                                    • Vertical double scissor.
                                    • Capacity: 1000 kg
                                    • Table area: 1300x820 mm

                                    Tables for high lifts and long goods. Table should be fixed into floor with bolted joints. Lifting height up to 4210 mm. Maintenance free pivot bushings. Large safety clearance between the scissors to avoid injuries. Lift cylinder with internal drainage. Safety valve to ensure safety in case of a hose burst. Low-noise power pack with built-in overload valve. Safety switch in top position. Moveable limit switch for adjusting full raised stop. 4 end-stops, incl. 4 loops which can be used e.g. when lifting total lift table into a pit. Low-noise power pack with built in overload valve. Cable for 3-phase connection 380V/16 Ah. Approves to EN1570-1.
                                  • Lift-table, 1700x1000 mm, 1000 kg HT1000

                                    • Vertical triple scissor.
                                    • Capacity: 1000 kg
                                    • Table area: 1700x1000 mm

                                    Tables for high lifts and long goods. Table should be fixed into floor with bolted joints. Lifting height up to 3000 mm. Maintenance free pivot bushings. Large safety clearance between the scissors to avoid injuries. Lift cylinder with internal drainage. Safety valve to ensure safety in case of a hose burst. Low-noise power pack with built-in overload valve. Safety switch in top position. Moveable limit switch for adjusting full raised stop. 4 end-stops, incl. 4 loops which can be used e.g. when lifting total lift table into a pit. Low-noise power pack with built in overload valve. Cable for 3-phase connection 380V/16 Ah. Approves to EN1570-1.
                                  • Pallet stand HW, 1000 kg HW-ST

                                  • User-friendly pallet truck stand.
                                    By using the pallet truck stand, the user gets a good mobility. Fits the following lift tables: HW1001, HW1002, HD1000.
                                    Capacity 1000 kg.
                                  • Lift-table, 1300x820 mm, 1000 kg HW1001

                                    • Static lift table.
                                    • Capacity: 1000 kg
                                    • Table area (LxW): 1300x820 mm

                                    Maintenance free pivot bushings. Large safety clearance between the scissors to avoid injuries. Lift cylinder with internal drainage. Safety valve to ensure safety in case of a hose burst. Moveable limit switch for adjusting full raised stop. 4 end-stops, incl. 4 loops which can be used e.g. when lifting total lift table into a pit. Low-noise power pack with built-in overload valve. Cable for 3-phase 380V/16Ah. *

                                    Approves to EN1570-1.

                                    • 1 or 2 cylinders = 1000 or 2000/4000 kg.
                                    • Low-noise power pack equipped with built-in overload valve and flow compensated valve for
                                    • controlled lowering speed.
                                    • The upper platform has a safety frame that covers all four sides. There are double switches for lowering safety of the platform.
                                    • Mechanic stop enables safe maintenance.


                                    *Option: 3 phase 230V/50HZ.
                                  • Lift-table, 1200x800 mm, 1000 kg

                                  • HW1012-Y

                                    • Static lift table.
                                    • Table are (LxW): 1200x800 mm

                                    Maintenance free pivot bushings. Large safety clearance between the scissors to avoid injuries. Lift cylinder with internal drainage. Safety valve to ensure safety in case of a hose burst. Low-noise power pack with built-in overload valve. Cable for 3-phase 380V/16Ah.* Approves to EN1570-1.


                                    *Option: 3 phase 230V/50HZ

                                    There are demands from the Work Environment Authorities and the EC-directives when it comes to rules for lifting. Also very light lifting or wrong working positions can expose body for injuries.
                                  • Footpedal remote to HW table HWF-100

                                  • Foot control with emergency stop.
                                    Fits to all electric tables.
                                    Wire length 5 m.
                                  • Lift-table, 820x2500, 2000 kg LV2000

                                  • Horisontal double scissor lift, 2000 kg capacity.

                                    Tables for high lifts and long goods. Table should be fixed into floor with bolted joints. Lifting height up to 4210 mm. Maintenance free pivot bushings. Large safety clearance between the scissors to avoid injuries. Lift cylinder with internal drainage. Safety valve to ensure safety in case of a hose burst. Low-noise power pack with built-in overload valve. Safety switch in top position. Moveable limit switch for adjusting full raised stop. 4 end-stops, incl. 4 loops which can be used e.g. when lifting total lift table into a pit. Low-noise power pack with built in overload valve. Cable for 3-phase connection 380V/16 Ah. Approves to EN1570-1.
                                  • Lift-table, 1700x1000 mm, 800 kg MJ-Q801

                                    • Vertical four scissor.
                                    • Capacity: 800 kg
                                    • Table area: 1700x1000 mm

                                    Tables for high lifts and long goods. Table should be fixed into floor with bolted joints. Lifting height up to 4210 mm. Maintenance free pivot bushings. Large safety clearance between the scissors to avoid injuries. Lift cylinder with internal drainage. Safety valve to ensure safety in case of a hose burst. Low-noise power pack with built-in overload valve. Safety switch in top position. Moveable limit switch for adjusting full raised stop. 4 end-stops, incl. 4 loops which can be used e.g. when lifting total lift table into a pit. Low-noise power pack with built in overload valve. Cable for 3-phase connection 380V/16 Ah. Approves to EN1570-1.
                                  • Low Lift table, 1420x1140 SL1001

                                    • Low profile lift table.
                                    • Capacity: 1000 kg
                                    • Table area: 1450x1140 mm

                                    Static electro-hydraulic lift tables are specially made for installation without a pit. Lowered height is only 85 mm. Built with solid steel plates for highest strength and reliability. Separate hydraulic power pack (IP54) which is positioned next to the lift table. The moveable ramp is included. Cable for 3-phase connection 380V/16 Ah. Confirms to EN1570-1 and ANSI/ASME-norms.

                                    Ramp dimensions: W907xL1140xH85mm.
                                  • "U" Lift table, 1420x1140 mm, 1000 kg SU1001

                                  • 1420x1140 mm

                                    The U-shaped lift table is specially made for handling of standard pallets together with a hand pallet truck. No need for a pit or ramp, lowered height is only 85 mm.
                                    Built-up with solid steel plates for highest strength and reliability. Separate hydraulic power pack (IP54) which is positioned
                                    next to the lift table. The moveable ramp is included. Confirms to EN1570.
                                  • Motorcycle lifting-table TC500

                                  • Combined motorcycle and vehicle lift table.

                                    Table area (LxW): 2200x700 mm

                                    Lifting and lowering by dual foot pedals. Perfect for work shops and service stations. Construction made of square steel profiles and solid plates. End-stops and ramp included. 42 strokes to achieve highest position.
                                • Mobile Lift Tables

                                    • Mobile Lift-table, 1010x520 mm, 1000 kg BS100

                                    • Manual lift table.

                                      • Capacity: 1000 kg
                                      • Max. lifting height: 950 mm
                                      • Table area: 1010x520 mm

                                      Lifting with a foot pump and lowering with a handle.
                                      Medium duty design, smooth and easy to operate.
                                      Known for their unbeatable mechanical strength and
                                      reliability. With single and double scissors.
                                      Polyurethane wheels with roller bearing and castor.
                                      Rear wheels are equipped with brakes and wheel guards.
                                    • Man. Lift-table, 1200x800 mm, 500 kg BS50LB

                                    • Mobile, manual lift table.

                                      • Capacity: 500 kg
                                      • Table area: 1200x800 mm

                                      The table platform has EUR-pallet dimensions. The table construction is very robust, but is still very easy to maneuver due to low net weight. This table is famous for its mechanical strength and operation reliability. Manual lifting by foot pump and lowering by handle. Simple and reliable design ensures long lifetime.
                                    • El. M. Lift-table, 1200x800 mm, 1000 kg ES100L

                                    • Mobile, electric lift table.

                                      • Capacity: 1000 kg
                                      • Table area: 1200x800 mm

                                      The table platform has EUR-pallet dimensions. The table construction is very robust, but is still very easy to maneuver due to low net weight. This table is famous for its mechanical strength and operation reliability. Lifting and lowering by a push-button controller, connected to a European power pack (DC/700W). Maintenance free battery which gives many working hours per charging and a long lifetime.
                                    • El. Mobile Lift-table, 1010x520 mm, 300 kg ES30D

                                    • Mobile, electric lift table.

                                      • Capacity: 300 kg
                                      • Max. lifting height: 1600 mm
                                      • Table area: 1010x520 mm

                                      Lifting and lowering by a push-button controller, connected to a european power pack (DC/700W). Maintenance free battery which gives many working hours per charging and a long life. Known for their unbeatable mechanical strength and reliability. These tables are used for many types of work. Available in single or double scissors.
                                      Polyurethane wheels with roller bearing and castor.
                                      Rear wheels are equipped with brakes and wheel guards.
                                    • Manual Stainless Lift Table, 1000x800 mm, 175 kg SX-175

                                    • Mobile, manual lift table.

                                      • Stainless.
                                      • Capacity: 175 kg
                                      • Table area: 1000x800 mm

                                      This stainless steel mobile screw lift table is very easy to operate and move. The single scissor is operated manually by a handle, can be used on both sides. Non-marking castor wheels with dual foot brakes. Table platform moves 10 mm up/down at each 360 degrees rotation of the crank handle.
                                    • El. M. Lift-table, 700x450 TFE15

                                    • New, modern lifting tables with electric actuator technic

                                      Enables lifting without hydraulic oils and suits perfectly for use in clean settings, such as hospitals, labs, schools etc.

                                      • Lifting height 210-740 mm.
                                      • Capacity (kg) 150
                                      • Weight (kg) 42
                                      • Outer dimensions 700x450x875 mm
                                  • Workshop Cranes, Crane and Fork Equipments, Drum Handling

                                      • Workshop Cranes

                                          • "EU" Crane, 1000kg EC1000

                                          • Crane, for EUR-pallet.

                                            Heavy-duty designed work shop crane. Made with Euro pallet dimensions, 840 mm between support legs. U-shaped support legs. There are 4 reach-out positions and lifting capacities. Turnable hook. Built-in overload protection valve. Overload testing before delivery. Distance between floor and lowest part of support leg, 60 mm.

                                            Dimensions (see drawing)
                                            L1: 1360 mm
                                            L2: 1060 mm
                                            L3: 1295 mm
                                            H1: 155 mm
                                            H2: 470 mm
                                            H3: 705 mm
                                            H4: 2225 mm
                                            H5: 2475 mm
                                            H: 1595 mm

                                            Capacity
                                            Pos. 1: 1000 kg
                                            Pos. 2: 800 kg
                                            Pos. 3: 500 kg
                                            Pos. 4: 300 kg
                                          • Foldable Crane, 1000kg FC1000

                                          • Foldable V-crane.

                                            Have an unique technology, with a quick lift and double action pump,
                                            Very fine speed adjustment when lowering. High lift capacity in all positions. Operating handle and cylinder with 360 degree swivel. Heavy duty design work shop crane in three capacity models. V-shaped support legs. Overload testing before delivery. Distance between floor and lowest part of support leg: 25 mm

                                            Dimensions (see drawing)
                                            A: 1675 mm
                                            B: 190 mm
                                            C: 1630 mm
                                            D: 1230 mm
                                            E: 150 mm
                                            F: 2445 mm
                                            G: 2330 mm

                                            I: 245 mm

                                            Capacity (kg)
                                            Pos. 1: 1000
                                            Pos. 2: 800
                                            Pos. 3: 700
                                          • Foldable Crane, 2000kg FC2000

                                          • Foldable V-crane.

                                            Have an unique technology, with a quick lift and double action pump,
                                            Very fine speed adjustment when lowering. High lift capacity in all positions. Operating handle and cylinder with 360 degree swivel. Heavy duty design work shop crane in three capacity models. V-shaped support legs. Overload testing before delivery. Distance between floor and lowest part of support leg: 85 mm

                                            Dimensions (see drawing)
                                            A: 1690 mm
                                            B: 205 mm
                                            C: 1900 mm
                                            D: 1290 mm
                                            E: 150 mm
                                            F: 2705 mm
                                            G: 2505 mm

                                            I: 230 mm

                                            Capacity (kg)
                                            Pos. 1: 2000
                                            Pos. 2: 1700
                                            Pos. 3: 1500
                                          • Foldable Crane, 500kg FC500

                                          • Foldable V-crane.

                                            Have an unique technology, with a quick lift and double action pump,
                                            Very fine speed adjustment when lowering. High lift capacity in all positions. Operating handle and cylinder with 360 degree swivel. Heavy duty design work shop crane in three capacity models. V-shaped support legs. Overload testing before delivery. Distance between floor and lowest part of support leg: 60 mm

                                            Dimensions (see drawing)
                                            A: 1410 mm
                                            B: 165 mm
                                            C: 1510 mm
                                            D: 895 mm
                                            E: 102 mm
                                            F: 2120 mm
                                            G: 1960 mm
                                            H: 150 mm

                                            I: 340 mm

                                            Capacity (kg)
                                            Pos. 1: 500
                                            Pos. 2: 425
                                            Pos. 3: 350
                                        • Crane and Fork Equipment’s

                                            • Fork telescopic jib, 3000kg AR-E30

                                            • Telescopic fork.

                                              • Capacity: 596-3000 kg

                                              Useful fork truck crane for heavy loads
                                              where it normally is hard to reach. The
                                              crane is adjustable in height up to 40
                                              degrees and reaches 3726 mm at most.



                                               
                                            • Crane Fork, 3000kg CK30

                                            • Robust crane fork.

                                              • Work load limit 3000 kg
                                              • Self-balancing head

                                              This Crane Fork has a very handy and robust construction
                                              which can be operated easily without slings or chains.
                                              CK-series, has a non self-balancing head, and thusly the crane operator must step out of the cabin in order to make adjustments. To achieve best performance goods should
                                              weigh 20% of total crane capacity. Width of forks is
                                              adjustable and the crane tower is also adjustable in height.
                                              CK-series is the manual balancing version.
                                            • Crane Scale, 3000 kg CW30

                                            • Compact crane scale.

                                              • Capacity: 20-3000 kg

                                              A compact measuring device for weighing loads during lifting. Tara functions to show either gross or net loads. Remote maneuvered. Suits very well with our fork hook, MK25. Measuring range is 20-3000 kg and indexing accuracy is 1 kg. Net weight is 15 kg.

                                              • Capacity (kg) 20-3000
                                              • Weight (kg) 15
                                            • Crane Fork, 3000kg CY15

                                            • Robust crane fork.

                                              • Work load limit 1500 kg
                                              • Self-balancing head

                                              This Crane Fork has a very handy and robust construction
                                              which can be operated easily without slings or chains.
                                              CY-series, with its self-balancing head, let crane operator
                                              stay in cabin, no need to step out of lorry/crane to make
                                              adjustments. To achieve best performance goods should
                                              weigh 20% of total crane capacity. Width of forks is
                                              adjustable and the crane tower is also adjustable in height.
                                              CK-series is the manual balancing version.
                                            • Fork Extensions, 125/1830 EX725

                                            • Fork extensions.

                                              • Fork length: 1830 mm
                                              • Fits to fork width: 125 mm

                                              The simple but effective way of lengthening your forks to be able to handle longer loads safely. Heavy duty steel construction, fits on forks which are up to 50 mm in thickness. The extensions has an U-beam shape.
                                            • Fork Hook, 2500 kg MK25

                                            • Fork hook.

                                              • Capacity: 2500 kg

                                              Converts forklift into a mobile crane in seconds. Fork hook is adjustable along the length of the forks and secures the forks with thumb screws. Swivel hook includes a safety hatch. Weight is 25 kg and it suits max. fork dimension 160x60 mm.
                                          • Drum Handling

                                              • Drum Grab, single DG10

                                              • Mechanical drum grab for forklift trucks.

                                                The drum grab is made for forklift trucks. It lifts 210 litre steel drums easily and quickly, without any hydraulic or electrical connections. The drum grab slips onto forks and is locked with screws. You lift, transport and deposit drums without leaving the
                                                driver position. Capacity for DG10 is 470 kg. It weighs 55 kg.

                                                • Capacity (kg) 470
                                                • Weight (kg) 55
                                              • Drum Lifter, 350 kg DL350

                                              • Drum lifter.

                                                Lifts 210 litres

                                                For lifting 210 litres steel drum. Easy moves and handles open or closed head, loaded steel drums. Allows quick, gentle loading into overpacks and keeps drums upright during lift, minimize spills and
                                                injuries. Workes easily with overhead hoist or hook from forklift.

                                                • Weighs 9,5 kg.
                                                • Capacity (kg) 350
                                                • Weight (kg) 9,5
                                              • Drum Tongs, 500 kg DN500

                                              • Drum tong.

                                                Lifts 210 litres

                                                For lifting 210 litres steel drum with overhead hoist. Semiautomatic tong suitable for steel drums. To operate set locking lever in locked open position. When central over the horizontal drum release lever to allow hooks to fall and locate under both rims. Hooks automatically engage when lifted and disengaged when drum is sat down.

                                                • Capacity (kg) 500
                                              • Hydraulic Drum Truck, 300 kg WA30A

                                              • Hydraulic drum truck.
                                                • Capacity: 300 kg
                                                • Drum size: 5572 mm (Ø22,5"), 210 Liter

                                                Ergonomically lifts, transports, and places poly,steel, or fibre drums on or off pallets.
                                                A spring-loaded clamp securelyholds any rimmed drum.
                                                Suitable lifting height for ledge and car.
                                                Compact design and very easy to handle.

                                                • Capacity (kg) 300
                                                • Weight (kg) 72
                                                • Steering wheels Ø125x32
                                                • Lift height 870-1675 mm (min-max)
                                                • Drive wheels (diameter) Ø125x32
                                                • Outer dimensions 952x956x1560
                                            • Plastic Dollies, Hydraulic Jacks, Machine Skates

                                                • Plastic Dollies

                                                    • Plastic dollie, 600x400, 150kg PD150

                                                    • Plastic dollie.

                                                      Light-weight design in ABCplastic,
                                                      Nylon castor wheels.

                                                      Container Max: 600x400 mm
                                                      Container Min: 300x300 mm

                                                      Capacity (kg) 150
                                                      Container, min (mm) 300x300
                                                      Container, max (mm) 600x400
                                                      Weight (kg) 3,8
                                                      Outer dimensions 620x420x150
                                                    • Plastic dollie, 600x400, 250kg PD250B

                                                    • Plastic dollie.

                                                      Light-weight design in ABCplastic,
                                                      Nylon castor wheels.

                                                      Container Max: 600x400 mm
                                                      Container Min: 300x300 mm

                                                      Capacity (kg) 250
                                                      Container, min (mm) 300x300
                                                      Container, max (mm) 600x400
                                                      Weight (kg) 3,8
                                                      Outer dimensions 604x402x162
                                                    • Plastic dollie, with handle PD250C

                                                    • Plastic dollie.

                                                      Light-weight design in ABCplastic,
                                                      Nylon castor wheels.

                                                      With handle.

                                                      Container Max: 600x400 mm
                                                      Container Min: 300x300 mm

                                                      Capacity (kg) 250
                                                      Container, min (mm) 300x300
                                                      Container, max (mm) 600x400
                                                      Weight (kg) 9
                                                      Outer dimensions 605x405x980
                                                    • Zink dollie, 800x600, 400kg ZS400B

                                                    • Zinc-plated dollie.

                                                      The ZD range is a zinc-plated design of steel bars, suitable for "clean areas" such as hospitals and the food industry.

                                                      Capacity (kg) 400
                                                      Container (mm) 800x600
                                                      Weight (kg) 8
                                                      Total length 800 mm
                                                      Total width 600 mm
                                                  • Hydraulic Jacks

                                                      • Forklift Jack,incl.2pcs stands HFJ-400A

                                                      • Hydraulic forklift jack.
                                                        • Ultra-low
                                                        • Capacity: 4 ton

                                                        Specially designed for forklift trucks, high capacity and a rugged construction. Extra low pick-up position with double 2-position lift pad levels for hard-to reach places under low profile forklift trucks.
                                                        Unique design of the hydraulic pump incl. high-quality seal kits and built-in overload protection valve. Removable handle and compact size. Confirms EC- and ANSI-standards.
                                                      • Steel Jack, 1,5 T HKB-1,5

                                                      • Steel jack.
                                                        • Capacity: 1,5 ton

                                                        HVS-series are developed in accordance with the
                                                        latest safety regulations. Milled rack, geared wheels
                                                        and tempered parts of driving gear. Lift from toe or
                                                        clawed head. Safety crank with folding handle.
                                                        • Stroke: 300 mm
                                                        • Lift range: 70-590 mm
                                                      • Hydraulic Jack, 10 ton HM100

                                                      • Hydraulic Allround Jack.
                                                        • Capacity: 10 ton

                                                        This ultra-low-profile, compact and reliable basic design can be used in all positions, horizontal and vertical. It lifts both on the foot and on the top housing. The housing of the jack can rotate 360 degrees, which makes it unique. Suitable for all types of repair,
                                                        maintenance and installation work with machines. The very low foot height measures only 30 mm.
                                                        Removable pump lever.
                                                        Accurate lowering speed.
                                                        • Stroke: 230 mm
                                                        • Lift range: 30-650 mm
                                                      • Steel Jack, 10 T HVS-10A

                                                      • Steel jack.
                                                        • Capacity: 10 ton

                                                        HVS-series are developed in accordance with the latest safety regulations. Milled rack, geared wheels and tempered parts of driving gear. Lift from toe or clawed head. Safety crank with folding handle.
                                                        • Stroke: 300 mm
                                                        • Lift range: 90-1100 mm
                                                      • Toe Jack, 3ton TJ30

                                                      • Hydraulic toe jack.
                                                        • Ultra-low
                                                        • Capacity: 3 ton

                                                        Compact and strong toe jack has three (3) toe heights and is very versatile designed. The hydraulic pump is protected by the lift housing. Manual pump lever. It lifts both on the toe and on the top housing. Lift handle and adjustable support legs are included.
                                                        • Stroke: 130 mm
                                                        • Lift range: 15-240 mm
                                                    • Machine Skates

                                                        • Adjust.Skate, 12000kg CM120

                                                        • Adjustable skates.

                                                          Capacity: 12 ton

                                                          The adjustable skates are two skate units which are connected by two steel rods, making the width of the skates adjustable.
                                                          The skates can be used as separate individuals also.
                                                          Nylon wheels.
                                                        • Roller crowbar,1500kg RC15

                                                        • Roller crowbar.

                                                          Capacity: 1500 kg

                                                          Long and steady manual roller lifter that lifts up the first millimetres above floor level to make it possible to then use a hydraulic lift jack. When the load is lifted up the skates can be positioned below.

                                                          • Capacity (kg) 1500
                                                          • Weight (kg) 13
                                                          • Wheel width (mm) 55
                                                          • Wheel diameter (mm) 100
                                                        • Skate with castor/roller,1ton SC102

                                                        • Castor skates.

                                                          Capacity: 1 ton

                                                          The castor skates are available in two models. SC102 with 2 castor wheels (diameter: 75x46 mm) and 2 fixed wheels (diameter: 100x35 mm) for versatile turning of goods. SC104 with 4 castor wheels (diameter: 75x46 mm) for totally free turning of goods. Nylon wheels.
                                                        • Skate with castor, 1ton SC104

                                                        • Castor skates.

                                                          Capacity: 1 ton

                                                          The castor skates are available in two models. SC102 with 2 castor wheels (diameter: 75x46 mm) and 2 fixed wheels (diameter: 100x35 mm) for versatile turning of goods. SC104 with 4 castor wheels (diameter: 75x46 mm) for totally free turning of goods. Nylon wheels.
                                                        • Skate, fixed wheels, 1ton SF10

                                                        • Fixed skates.

                                                          Capacity: 1 ton

                                                          Skates can be used wherever heavy objects have to be moved. The large diameter nylon rollers ensure easy movement and spread the load evenly, protecting the floor or ground from damages caused by high point loads. A practical steel handle is welded onto the skate for easy and safe handling and positioning of the skates. The platforms of the skates are fitted with a rubber surface which helps grip and protect the object being moved. Powerful wheel pins. The wheels are mounted in rubber-sealed roller bearings (RS). In SF10 and SF20 there are no bearings mounted due small nylon wheels.

                                                          No of wheels-shaft: 4-2
                                                        • Steerable skates, 12ton ST120

                                                        • Steerable skates.

                                                          Capacity: 12 ton

                                                          The steerable skates include a 1 meterlong drawbar and a skate platform that swivels on a thrust bearing, allowing easy movement around corners. On the ST60 and ST120 there is a towing hook-on bracket to be used by a forklift truck.

                                                          Steel wheels.
                                                      • Platform Trolleys, Furniture Handlers, Sack Trucks

                                                          • Platform Trolleys

                                                              • Foldable platform trolley PH-150

                                                              • Foldable platform trolley.

                                                                This range of platform trolleys are made of welded or bolted steel tubes and profiles with one platform and foldable handle. Standard bearings in wheels.

                                                                • Capacity (kg) 150
                                                                • Weight (kg) 11
                                                                • Wheel diameter (mm) 100
                                                              • Platform trolley PH-360

                                                              • Steel trolley.

                                                                Price-worthy steel trolley.
                                                                Wooden platform and fixed handle.

                                                                • Capacity (kg) 300
                                                                • Weight (kg) 22
                                                                • Wheel diameter (mm) 160
                                                              • Platform trolley PP1-200

                                                              • Plastic platform trolley with foldable handle.

                                                                Platform trolley made of bolted steel tubes and profiles with one plastic platform and foldable handle.

                                                                • Capacity (kg) 200
                                                                • Weight (kg) 13
                                                                • Wheel diameter (mm) 100
                                                              • Service trolley PP2-200

                                                              • Plastic platform trolley with 2 shelves.

                                                                Platform trolleys made of bolted steeltubes and profiles with two plastic shelves.

                                                                • Capacity (kg) 200
                                                                • Weight (kg) 18,5
                                                                • Wheel diameter (mm) 100
                                                              • Service trolley TD3-120

                                                              • This range of new top-quality platform trolleys and wagons are made of welded / bolted steel tubes profiles with one to three platforms and fixed or foldable handles. Non-marking polyurethane
                                                                wheels mounted on roller bearings. PVC-covered platforms.

                                                                • Capacity (kg) 120
                                                                • Weight (kg) 26
                                                                • Outer dimensions 860x480x750
                                                            • Furniture Handlers

                                                                • Corner movers, 600kg AR150

                                                                • Transport corners.

                                                                  Capacity: 600 kg

                                                                  For light-weight moving of rectangular goods on even grounds. Suitable for delivery and removal of furniture. Manual corners made of steel plates, with rubber pads and 3 castor wheels on bearings. 4 units per set.
                                                                • Hydraulic Transporter, 1800kg FM180A

                                                                • Hydraulic transporter ofr heavy machines and furniture.

                                                                  Capacity: 1800 kg

                                                                  For professional transport of heavy machines and furniture. Ideal for delivery, maintenance and installation work. Hydraulic transporters made of tubular profiles. Lift cylinders and pump handle. Lift plates with rubber pads, support frame, two steerable PU castor wheels on bearings and 5 m fixing straps. Sold in pairs.

                                                                  Dimensions lifting plate: 600x60 mm
                                                                • Manual Furniture Mover, 600kg FM60

                                                                • Manual furniture mover.

                                                                  Capacity: 600 kg

                                                                  For moving of bulky and heavy items. Ideal for removal and installation work. Manual movers made of steel profiles, lift winch, crank handle, lift pads rubber covered, dual support rails, two PU castor wheels on bearings and 5 m fixing straps. Sold in pairs.

                                                                  Dimensions lifting plate: 225x120 mm
                                                              • Sack Trucks

                                                                  • Foldable handtruck. 250kg HC250B-7

                                                                  • Folded sack truck for general purpose.

                                                                    Capacity: 250 kg

                                                                    This range of warehouse and sack trucks are made of bolted, riveted or welded aluminium profiles with single or double knife/foot plate, which can be fixed or folded. Pneumatic tyres, strong rims, maintenance free rubber-sealed bearing and safety handles are standard on most trucks.
                                                                  • Stairclimbing sack trolley HT-1312

                                                                  • Stair climbing sack truck.

                                                                    Capacity: 150 kg

                                                                    This range of warehouse and sack trucks are made of welded steel tubes with single or double knife / foot plate, that can be fixed
                                                                    or folded. Pneumatic tyres, strong steel rims, maintenance free rubber-sealed bearings.
                                                                  • Dual footplate sack truck HT-1823A

                                                                  • Universal dual footplate sack truck.

                                                                    Capacity: 250 kg

                                                                    This range of warehouse and sack trucks are made of welded steel tubes with single or double knife / foot plate, that can be fixed
                                                                    or folded. Pneumatic tyres, strong steel rims, maintenance free rubber-sealed bearings.
                                                                  • Three-way truck HT-1824

                                                                  • Sack truck and trolley, with triple function.

                                                                    Capacity: 250 kg

                                                                    This range of warehouse and sack trucks are made of welded steel tubes with single or double knife / foot plate, that can be fixed
                                                                    or folded. Pneumatic tyres, strong steel rims, maintenance-free rubber-sealed bearings. HT-1824 is a combination type, this model can be used as a sack truck and also as a trolley.
                                                                  • Alu cardboard trolley,gliders HT-2502AL

                                                                  • Stack truck in aluminium.

                                                                    Capacity: 180 kg

                                                                    This range of warehouse and sack trucks are made of bolted, riveted or welded aluminium profiles with single or double knife/foot plate, which can be fixed or folded. Pneumatic tyres, strong rims, maintenance free rubber-sealed bearing and safety handles are standard on most trucks.
                                                                  • Proffessional alu hand truck SP-300

                                                                  • Aluminium sack truck "Profi".

                                                                    Capacity: 200

                                                                    This range of warehouse and sack trucks are made of bolted, riveted or welded aluminium profiles with single or double knife/foot plate, which can be fixed or folded. Pneumatic tyres, strong rims, maintenance free rubber-sealed bearing and safety handles are standard on most trucks.
                                                                  • Alu. foldable handtruck TR100

                                                                  • Compact, foldable hand truck in aluminium.

                                                                    Capacity: 100 kg

                                                                    This range of warehouse and sack trucks are made of bolted, riveted or welded aluminium profiles with single or double knife/foot plate, which can be fixed or folded. Pneumatic tyres, strong rims, maintenance free rubber-sealed bearing and safety handles are standard on most trucks.
                                                                • Universal Shelving, Steel Cabinets, Scales, Accessories

                                                                    • Universal Shelving

                                                                        • Shelving,3 lev.

                                                                        • A system which can be combined in many variations. Each section is a complete unit. The assembly of the system is very
                                                                          simple and safe. The unique design allows access from all four sides. The bottom of the upright has a protective plastic foot, to avoid damage to the floor. Without the chipboards it is used as tyre shelving.

                                                                          Each shelf can carry 400 kg.
                                                                        • Tire rack

                                                                        • A system which can be combined in many variations. Each section is a complete unit. The assembly of the system is very
                                                                          simple and safe. The unique design allows access from all four sides. The bottom of the upright has a protective plastic foot, to avoid damage to the floor. Without the chipboards it is used as tyre shelving.

                                                                          Each shelf can carry 400 kg.
                                                                      • Steel Cabinets

                                                                          • Welded cabine, blue

                                                                          • Welded steel cabinet.

                                                                            Durable welded metal cabinet with reinforced doors and concealed espanjolett locker. 4 adjustable shelves incl. in each cabinet. Additional shelves are available.

                                                                            Blue (RAL 5010)
                                                                          • Welded cabinet, gray

                                                                          • Welded steel cabinet.

                                                                            Durable welded metal cabinet with reinforced doors and concealed espanjolett locker. 4 adjustable shelves incl. in each cabinet. Additional shelves are available.

                                                                            Grey (RAL 7035)
                                                                          • Knock-down cabinet, blue

                                                                          • Knock-down cabinet.

                                                                            The knock-down cabinet is a boltless self-assembly model delivered as a flat pack. This makes it to a low cost alternative to the ready welded cabinet versions both as product and as for transportation. Two sizes are available in colour blue (RAL 5010) or grey (RAL 7035). Four adjustable shelves are included. Additional shelves also available.
                                                                          • Chemical cabinet, unisolated, grey

                                                                          • Environmental steel cabinet.
                                                                            Durable welded metal cabinet with reinforced doors and concealed espanjolett locker and four adjustable liquid-leak-free shelves. It has all security functions except fire protection. Lockable doors with perforated squares for air circulation. Filter plates are optional which fits the liquid collecting shelf pan.
                                                                          • Welded steel cabinet, black

                                                                          • Durable welded metal cabinet

                                                                            Durable welded metal cabinet with reinforced doors and concealed espanjolett locker. 4 adjustable shelves incl. in each cabinet. Additional shelves are available.

                                                                            Blue (RAL 9005)
                                                                        • Scales

                                                                            • "U" Table Scale, 1000 kg ND1000

                                                                            • “U” shaped scale for easy access for on/ off loading of open bottom pallets and containers. No need for pit or load ramps.
                                                                              Can easily be lifted and relocated due to light net weight. Tara function. 580 mm between legs.

                                                                              Indexaccuracy 1 resp. 3 kg. Resolution steps
                                                                              10 resp. 20 kg. Net weight 38 kg
                                                                            • HPT with scale. ZF20S

                                                                              • Electronic scale
                                                                              • Capacity 2000 kg

                                                                              Equipped with electronic scale.
                                                                              Stationary and mobile weighing can be used also as a normal pallet truck.
                                                                              Accuracy is 0,1% of the total weight, 1 kg graduation. IP65.
                                                                              Four load cells for accurate weighing even when loads are uneven.
                                                                              Tara function to add on or withdraw from net weight.
                                                                              Weighing device powered with 4 pcs 1,5V type AA batteries.
                                                                              Display turns off automatically after 3 min in standby position.
                                                                            • HPT with scale and printer ZFP20S

                                                                              • Electronic scale
                                                                              • Capacity 2000 kg
                                                                              • Thermo printer.

                                                                              Equipped with electronic scale.
                                                                              Stationary and mobile weighing can be used also as a normal pallet truck.
                                                                              Accuracy is 0,1% of the total weight, 1 kg graduation. IP65.
                                                                              Four load cells for accurate weighing even when loads are uneven.
                                                                              Tara function to add on or withdraw from net weight.
                                                                              Weighing device powered with 4 pcs 1,5V type AA batteries.
                                                                              Display turns off automatically after 3 min in standby position.

                                                                              ZFP20S is equipped with thermo printer.
                                                                              • Roll diameter: 40 mm
                                                                              • Warning signals: No battery, no paper, low temperature
                                                                          • Accessories

                                                                              • PP Strap Roller 12mm PPR12

                                                                              • PP tape for strapping machine.

                                                                                PP tape suitable for strapping machine XT8022.

                                                                                • Width: 12 mm
                                                                                • Inner roll diameter: 200 mm
                                                                                • Length: 1000 m
                                                                              • Foot Break for Pallet truck RQ77N-B

                                                                              • Foot Break
                                                                              • Semi auto. strapping machine XT8022

                                                                              • Semi-automatic strapping machine.

                                                                                Semiautomatic strapping machine straps small and medium big packages easy and fast without need for adjustments. Tighten, weld and cut PP strap automatically. It has a stainless steel table platform and is equipped with swivel wheels to enable easy movement.
                                                                                Dimensions: Width 565 mm, length 895 mm, adjustable height 720-870 mm. 220V 50Hz connection. PP tape width 6-15 mm. PP tape paper core Ø200mm/Ø230mm/Ø280mm. Max tightening force 60 kg. Weight 85 kg.

                                                                                Accessories:
                                                                                • PP tape, art. nr. PPR12
                                                                                • Width 12 mm, inner roll diameter 200 mm, length 1000 m.