Videos
Loading the player ...
  • Offer Profile
  • FAMILY BUSINESS SINCE 1963

    We are a family business located in Lich, in the centre of Hessen, in the heart of nature. For more than 50 years, we have specialised in high-performance tools and have played a key role in all developments in machining technology.

    In addition to conventional drills and milling cutters, you will find a large number of special tools to solve your machining problems. SPPW not only offers tools, we also put together a complete, individual product package. You also benefit from our individual service, lean business processes, procurement and tool management.

    First-class consulting, best quality and individual solutions are our claim and our promise. Our passion for precision as the basis for your economic success.
Product Portfolio
  • Passion for Precision

    • State of the art consulting, best quality tools and individual solutions are our mission and our commitment. Our passion for precision as the base for your economic success.
        • Center Drills

          • Centering drills made of carbide, powder metal, HSS-E and HSS, in forms A, B, R, W and A90 - also available in long version. Available standards: DIN, AISI (USA), BS (British) and JIS (Japanese standard)
              • Carbide Center Drills

              • SPPW solid carbide center drills are available in shape A and shape R, at an angle of 90 degrees. Produced from fine grain carbide in K15 premium quality, also in long version. Besides the standard dimension DIN 333, SPPW center drills solid carbide are also available in special dimensions according to ISO standard. On request, SPPW also supplies center drills according to US standard and Japanese standard.
              • HSS Center Drills

              • SPPW offers the widest range of high speed steel center drills in the whole of Germany. SPPW center drills HSS are manufactured according to DIN 333 and are available in shape A, shape R and shape B. Shapes A and B are also available with bead. In addition, SPPW supplies HSS center drills in left-hand cutting design especially for lathes.
              • HSS-E Center Drills

              • SPPW offers center drills HHS-E made of powder metal in form A and thus increases your productivity. In addition, Form A, Form R and Form B with flat are offered, which are especially suitable for the automotive industry. SPPW center drills HSS-E are available in long lengths, up to 200mm.
              • HSS-E05 Step Center Drills

              • SPPW step center drills are made of high-speed steel with a cobalt content of 5 percent, especially for shaft ends of electrical machines. They are available in shape D, shape DR and shape DS, according to DIN 332/2. SPPW offers these partly with flat and cooling grooves, up to a diameter of M24
              • Powdermetal Center Drills

              • High-performance center drills made of HSS-E powder metal combine toughness with durability for high productivity under difficult (unstable) operating conditions. Available with X.Cut coating for extra high productivity and prolonged tool life.
            • NC Spotting Drills

              • NC pilot drills made of HSS-E or VHM for fast and precise spot-drilling, extremely high positioning accuracy, particularly precise imprints: angles 60°, 90°, 120°, 135° and 142°.
                  • Carbide Micro NC Spotting Drills

                  • SPPW Mico-NC tapping bits are suitable for precise tapping and promise improved penetration, as well as high form accuracy and concentricity. The tip has a precise special grinding with cross cutting edge and is X.Cut coated, the countersink angle is 90 degrees. SPPW offers its Micro NC spot drill in the diameter range from 0.3mm to 2.5mm.
                  • Carbide NC Spotting Drills

                  • SPPW NC spot drills are used for precise spot drilling. They penetrate better into the material, with high form accuracy and concentricity. NC spot drills have a choice of 60 degree, 90 degree, 120 degree and 142 degree point angles and are available with X.Cut surface coating. It provides higher productivity and is used for machining hard materials. SPPW supplies NC spot drills in a diameter range from 2mm to 20mm, as well as in long version and double-sided version, the Duo-Mac.
                  • HSS-E05 Spotting Drills

                  • SPPW NC spot drills are suitable for precise spot drilling work and have high form accuracy and concentricity. NC spot drills have a point angle of 60 degrees, 90 degrees, 120 degrees and 142 degrees and a clamping surface, according to Form B, the corrugated mandrel shank and has either a long shank, a left-hand cutting shank or a Morse taper shank. Their A.Cut and X.Cut surface coatings provide improved penetration into the material. SPPW supplies high-speed steel NC spot drills in the diameter range from 1mm to 15.4mm, as well as in inch dimensions.
                  • DuoMag Double Sided Spotting Drills

                  • NC pilot drills made of HSS-E or VHM for fast and precise spot-drilling, extremely high positioning accuracy, particularly precise imprints: angles 60°, 90°, 120°, 135° and 142°.
                • Step Drills

                  • Step drills made of HSS-E or solid carbide for accurately aligned of step drillings with countersink angles of 90° and 180°.
                      • Mini Carbide Step Drills

                      • SPPW mini short step drills made of solid carbide are for cutting tapped holes, according to DIN 336-1 and has an X.Cut surface coating. The product is supplied from M0.8 with a countersink angle of 90 degrees. SPPW mini short step drills made of solid carbide drill holes and countersinks accurately in alignment, in one operation.
                      • Carbide Step Drills

                      • SPPW short step solid carbide drills are for cutting tapped holes (DIN 336-1), screw through holes(DIN273) and counterbores (DIN74). They have X.Cut surface coating with 90 degree and 180 degree countersink angle. SPPW short-step drills made of high-speed steel with X.Cut drill holes and countersinks accurately in alignment, in one operation, and are particularly well suited for NC machines. They are available from M3 to M12.
                      • HSS-E05 Step Drills

                      • SPPW short step drills made of HSS-E05 are particularly suitable for cutting screw through holes(DIN273) and counterbores (DIN74). They achieve a fine finish. SPPW short step drills made of HSS-E05 are available with X5.Cut coating or blank, in a countersinking angle 90 degrees to 180degrees. The short step drills drill holes and countersinks in a precise alignment, in one operation, and are particularly suitable for profile work. SPPW supplies in sizes M2-14.
                      • HSS-E05 Thread Hole Step Drills

                      • SPPW core hole short step drills made of HSS-E05 are used for cutting tapped holes, according to DIN 336-1, at a countersinking angle of 90 degrees. The core hole short-step drills drill holes and countersinks accurately in alignment, in one operation with a high concentricity. SPPW supplies in sizes M3-16 with an X5.Cut surface coating or blank.
                    • Drills

                      • Twist drills from HSS, HSS-E, with carbide plate or from full carbide - miniature drills, high-performance drills with internal cooling as well as universal drills for almost all materials and special solutions for hard steel, Inconel and fibre plastics
                          • Carbide Miniature and Micro Drills

                          • SPPW micro and small drills solid carbide cover a wide range of applications. The product has a high concentricity and pitch accuracy and a self-centering 4-surface grinding with reinforced shank, similar to DIN 1899 and partly with internal cooling. SPPW supplies micro and micro drills solid carbide in the diameter range from 0.15mm to 3mm, as well as with X.Cut surface coating or blank.
                          • Carbide HPC drills

                          • SPPW's universal multi-range and high performance solid carbide drills are designed for machining difficult-to-cut materials and feature an X.Cut, X2.Cut or Z.Cut high performance surface coating. The high-performance drill achieves optimum, controlled chip removal and also ensures a long tool life. SPPW high performance solid carbide drills are partly available with internal cooling and reinforced shank, in diameter ranges from 2.8mm to 20mm.
                          • Carbide Drills for FRP

                          • SPPW solid carbide drills for CFRP/FRP are used for delamination-free drilling of fiber-reinforced plastics with Dia.HC surface coating, as well as bright or polished surface. The drills have a point angle of 90 degrees. SPPW offers them in the diameter range from 2mm to 16mm.
                          • Carbide Tipped Drills

                          • SPPW twist drills HM plate cover a wide range of applications and can produce stable design for drilling. They have a self-centering 4-surface grinding and driver according to DIN 1809 SPPW supplies in the diameter range from 1.5mm to 35mm.
                          • HSS-E05 Miniature Drills

                          • SPPW small diameter drills HSS-E05 cover a wide range of applications. They have special geometries for small diameters and partly cylindrical shanks, according to DIN 338. The self-centering 4-surface grinding, with X.Cut surface coating or bright surface, ends with a reinforced shank, similar to DIN 1899. SPPW supplies micro drills HSS-E05 from a diameter range of 0.15mm to 2.45mm and guarantees with its product high concentricity and pitch accuracy.
                          • HSS-E05 Drills

                          • SPPW twist drills made of high-speed steel with 8 percent cobalt content are high-performance drills for stainless steels and universal high-performance drills. They have a 4-surface ground joint, cross ground joint, similar to DIN 1412 C or point ground joint, similar to DIN 1412 (B) with X.Cut surface coating or blank. Some of these are available with a reinforced core. SPPW promises better control and high concentricity, such as pitch accuracy in the diameter range from 1mm to 20mm.
                          • HSS Drills

                          • SPPW twist drills made of high-speed steel cover a wide range of applications and in a wide variety of designs. They have a profile-ground design and are self-centering or have an elliptical or cross, taper shell grinding, according to DIN 1412 and are available with a C.Cut surface coating, bright vaporized surface. SPPW promises high concentricity as well as pitch accuracy and supplies products in the diameter range from 0.2mm to 50mm or in sets.
                          • Carbide HPC Drills for Special Applications

                          • Twist drills from HSS, HSS-E, with carbide plate or from full carbide - miniature drills, high-performance drills with internal cooling as well as universal drills for almost all materials and special solutions for hard steel, Inconel and fibre plastics
                        • Reamers

                          • Reaming tools made of HSS-E, with carbide inserts or solid carbide precision reamers, 1/100 increment reamers from stock, special tolerance reamers, long and extra long reamers. Diameter range from 0.2 mm to 60 mm
                              • Carbide Micro Reamers

                              • SPPW Micro reamers made of solid carbide are used for reaming through holes. They have a 20 degree left-hand helix, right-hand cutting, with reinforced shank. The tolerance is +/- 0.001. SPPW supplies solid carbide micro reamers in the diameter range from 0.2mm to 0.595mm.
                              • Carbide Machine Reamers 1/100

                              • SPPW reamers made of solid carbide are used for reaming through holes. Partially finds a carbide head or coolant outlet at the tip, with a gate of 45 degrees, left-hand helix and right-hand cutting. SPPW can supply these with X.Cut surface coating or bright surface, in diameter range from 0.6mm to 40.2mm and tolerance 0/+0.005. In addition, SPPW offers the possibility to produce special designs, such as fit machine reamers. These have a fit of choice or the standard fit H7.
                              • Carbide Machine Reamers H7

                              • SPPW reamers made of solid carbide with standard tolerance H7, are used for reaming of blind and through holes, for reaming of shallow counterbores or for position correction of already cast holes, chip ejection is in cutting direction. The product has a 10 degree left-hand helix or is straight fluted, in right-hand and end-cutting versions, as well as in a long version for reaming deep holes in case of access problems. Reamers VHM H7 Are available in X.Cut surface coating or blank, the diameter range is from 0.95mm to 20mm. With SPPW, the fit can be selected independently.
                              • HSS-E05 Machine Reamers 1/100

                              • SPPW reamers made of HSS-E05 are used for reaming through holes. The gate is right turning at an angle of 45 degrees, through a left-hand spiral. SPPW offers reamers from a diameter of 0.6mm to 20.2mm and to order in a fit of your choice, also in the standard tolerance H7.
                              • HSS-E05 Machine Reamers H7

                              • SPPW reamers made of HSS-E05 and machine peeling reamers, with cylindrical or MK shank, are used for reaming of blind and through holes, where the chip ejection is in the cutting direction and a section of 45 degrees. The products have left-hand helixes or are straight fluted, in right-hand cutting version, as well as in long version for reaming deep holes with access problems Reamers HSS-E05 H7 are available in diameter range er from 1mm to 60mm.
                              • HSS / HSS-E05 Taper Machine Reamers

                              • SPPW HSS/-E tapered reamers are used for reaming tapered bores and pointed bores. The product is available in form A, with a straight fluted chipbreaker, form B, with the highest surface finish and form C, a left-hand spiral that is right-hand cutting. SPPW offers its taper reamers in a diameter range from 0.6mm to 30mm.
                              • Hand Reamers

                              • SPPW hand reamer made of high-speed steel, according to DIN 206serves for reaming through holes, with 1/3 cutting edge 1:100 rising and a bevel of 45 degrees. The left-hand helix is clockwise with standard tolerance H7. SPPW offers the hand reamer in the diameter range from 1mm to 32mm.
                              • Carbide High Performance Reamers Internal Cooling

                              • Reaming tools made of HSS-E, with carbide inserts or solid carbide precision reamers, 1/100 increment reamers from stock, special tolerance reamers, long and extra long reamers. Diameter range from 0.2 mm to 60 mm
                            • Counter Sinks

                              • Sinking tools made of HSS-E, with carbide head or from solid carbide, single flute, with three flutes, countersinks with hole and piloted countersinks - angles 30°, 60°, 82°, 90°, 100°, 120° and 180°
                                  • Carbide HPC Counter Sinks

                                  • SPPW offers HPC countersinks made of solid carbide in various designs with electrical relief grinding and constant profile, with X.Cut surface coating or blank. This allows you to use countersinks for hard and abrasive materials or especially for use on CNC machines. SPPW countersinks are completely made of solid carbide and achieve a better vibration behavior. We offer taper countersinks in the diameter range from 4.3mm to 31mm, also in long version and reinforced cylindrical shank.
                                  • HSS-E05/-E08 Counter Sinks - 3 Flutes

                                  • SPPW countersinks made of HSS-E05 and HSS-E08 are suitable for drilling and countersinking in thin materials, such as laminate, wood and aluminum. The product is very smooth running due to the highly positive cut. Multiple regrinding is possible with almost all taper countersinks. SPPW offers its products in diameter range from 4mm to 80mm and in sets, as well as countersinking angle from 30deg to 120deg. They are also available in long versions and in various surface finishes, such as X5. Cut and A.Cut, on request or Blank.
                                  • HSS-E05 Counter Sinks with Hole

                                  • Sppw cross hole countersink HSS-E05 are used for deburring and working small chamfers, in light metals and plastics, as well as on smooth and burr-free surfaces. The tool is available in 60 degree, 82 degree, 90 degree, 100 degree and 120 degree countersink angles, with an A.Cut surface coating or blank. SPPW offers cross-axis countersinks in diameters ranging from 10mm to 50mm, which are also available in sets.
                                  • HSS-E05 Counter Single Flute Sinks

                                  • SPPW Flachsenken und Zapfsenker, mit festen Führungszapfen, eignen sich für feine und mittlere Durchgangsbohrungen und Gewindekernlöcher für versenken von Schrauben nach ISO 2009,2010, 7046, 7047. Innensechskantschrauben und Zylinderschrauben werden in den Senkwinkeln von 90 Grad und 180 Grad versenkt. SPPW Zapfsenker sind im Durchmesserbereich von 1mm bis 12mm mit einer A.Cut Oberflächenbeschichtung oder Blank lieferbar. Sie sind zudem auch im Satz erhältlich.
                                  • Counter Sinks and Bores

                                  • HSS-E05 and solid carbide SPPW flat countersinks and tang countersinks, with fixed guide tang, are suitable for fine and medium through holes and threaded core holes for countersinking screws according to ISO 2009,2010, 7046, 7047. Hexagon socket screws and cap screws are countersunk in the countersinking angles of 90 degrees and 180 degrees. SPPW counterbores are available in the diameter range of 1mm to 12mm with an A.Cut surface coating or blank. They are also available in sets.
                                • Multifunction and Deburring

                                  • Multifunctional tools for milling, countersinking, drilling and deburring. Multi-purpose tools, different machining operations can be combined and carried out efficiently with only one tool. Multi-V, deburrers, concave milling cutters, fore-back-deburrer, engravers and modular tools.
                                      • Multifunction Tools

                                      • SPPW multifunctional tools made of solid carbide and high-speed steel combine up to eight machining steps in one tool, such as V-groove milling, circular milling, contour milling, engraving, contour chamfering, boring and chamfering. They have tip angles of 40 degrees to 60 degrees, especially for deburring operations, 90 degrees and 120 degrees, for classic deburring and fiber operations, and also a tip angle of 100 degrees specifically for aircraft construction. The special X.Cut surface coating promotes the conductivity of the multifunctional tool VHM. SPPW supplies in the diameter range from 0.1mm to 20mm. Up to a diameter of 12mm the tools are available with a reinforced shank and since recently also with a through shank up to 12mm diameter. SPPW multifunctional tools are also available in a long version.
                                      • Carbide Deburring Tools

                                      • SPPW solid carbide deburring tools are forward and reverse deburring tools with 60 degree and 90 degree deburring angle and radius, best suited for finishing. They have constant relief and high precision grinding for the highest surface finish and can work horizontally, vertically and circularly. SPPW supplies excellent micro deburrers from 0.5mm diameter and also stocks forward-backward deburrers, a multi-bladed NC deburrer with tip angles of 60 degrees and 90 degrees, and quarter-circle concave cutters.
                                      • Modul.P - System Type 0

                                      • Module. P is SPPW's modular tooling system for making stepped bores, respectively guided counterbores. 200 elements allow over 10,000 possible combinations, but only within the types listed in the range (type 0, type 1 and type 2). Module. P consists of three parts. Firstly, the pilot drill, for through holes or the guide pin for through holes and blind holes. Secondly, a countersink and lastly, a holder.
                                      • Modul.P - System Type 2

                                      • Modul. P is SPPW's modular tooling system for making stepped bores, respectively guided counterbores. 200 elements allow over 10,000 possible combinations, but only within the types listed in the range (type 0, type 1 and type 2). Module. P consists of three parts. Firstly, the pilot drill, for through holes or the guide pin for through holes and blind holes. Secondly, a countersink and lastly, a holder.
                                      • HSS-E05 Pipe Deburrers

                                      • SPPW pipe deburrers are modular tools made of high-speed steel with eight percent cobalt content. They consist of an external counterbore, as well as an internal counterbore, which can be retrofitted with a guide bush if required. SPPW HSS-E pipe deburrers allow deburring of bars and pipes and are supplied in the diameter range from 5mm to 48mm.
                                      • Carbide Engraving Tools

                                      • Multifunctional tools for milling, countersinking, drilling and deburring. Multi-purpose tools, different machining operations can be combined and carried out efficiently with only one tool. Multi-V, deburrers, concave milling cutters, fore-back-deburrer, engravers and modular tools.
                                    • Carbide Micro End Mills

                                      • Miniature milling cutters from diameter 0.05 mm. Over 75 different versions for different materials such as steel, titanium, stainless steel, non-ferrous metals or precious metals. For applications in medicine, jewellery and mould making.
                                          • Micro End Mills

                                          • SPPW offers Micro Drill Groove Cutters and Micro End Mills, for general use, in a short, overlong and stable design. They have a reinforced cylindrical shank, shape HA and center cut. SPPW offers micro end mills in diameter range from 0.05mm to 14mm and X.Cut surface coating or polished.
                                          • Micro End Mills for Moldmaking

                                          • SPPW Micro- form milling cutters are suitable for use in small form making, also for machining hardened steels or aluminum. They feature a center cut designed to make milling more precise. SPPW offers Mirco form end mills in the diameter range from 0.3mm to 6mm, as well as overlength versions. The cutters can have a Z.Cut or X.Cut surface coating, or have a polished surface.
                                          • Micro Radius End Mills

                                          • SPPW micro radius cutters made of solid carbide have a short and extremely stable design and can be used universally. The product has a center cut, which guarantees extremely sharp cutting edges.
                                          • Micro Dental Radius End Mills

                                          • 3D machining of dental resins, especially wax and PMMA or abrasive materials such as zirconium oxide. The tool has an exempted design, especially for high depths of cut. SPPW offers its customers micro dental radius cutters in the diameter range from 0.6mm to 2.5mm and in X.Cut surface coating, as well as blank.
                                          • Micro End Mills for FRP/Graphite

                                          • SPPW offers micro cutters especially for machining carbon fiber reinforced plastic, glass fiber reinforced plastic and graphite. The micro cutters have a reinforced cylindrical shank, according to form H and provide a short stable design with center cut. SPPW micro cutters are available in the diameter range from 0.3mm to 5.9mm with diamond surface coating.
                                        • Rapid Line - End Mills

                                          • Milling cutters with highly polished surfaces for machining plastics and non-ferrous metals. Available as single flute cutter or two- and three-flute cutter. Suitable for milling of highly transparent surfaces. Multi-fluted and pyramid-profile cutters for milling of fibre plastics: GFK, CFK, AFK, honeycomb composite and foams.
                                              • Carbide Micro End Mills

                                              • SPPW micro milling cutters made of solid carbide are used for machining for light alloys and plastics, due to a short and stable design. The tool has a reinforced cylindrical shank in shape HA and a tip with center cut, as well as polished surface. SPPW supplies solid carbide micro cutters in the diameter range from 0.5mm to 3mm.
                                              • Carbide Single Flute End Mills

                                              • Carbide Single Flute End Mills SPPW end mills with a single solid carbide cutting edge are used for roughing and finishing a wide range of materials, such as highly transparent surfaces, light alloys, plastics, foams, laminates or aluminum profiles. Due to the extremely sharp cutting edge chip removal is particularly smooth and very smooth surfaces can be obtained. Depending on the design - up-cut or down-cut - the chips are evacuated upwards or ejected downwards. The surface is polished. SPPW supplies in the diameter range from 1.5mm to 20mm.
                                              • Carbide High Performance End Mills

                                              • SPPW high performance solid carbide end mills are suitable as HSC roughing and finishing cutters for long chipping materials and non-ferrous metals, as well as materials with adhesive tendency. The tool is available with Z.Cut surface coating or polished surface, where an Alu.Cut coating provides higher performance. SPPW offers high performance solid carbide thread milling cutters in the diameter range from 2mm to 20mm, some with coolant supply.
                                              • Carbide End Mills with 2 or 3 flutes

                                              • Carbide End Mills SPPW end mills with 2 or 3 flutes in solid carbide are used for roughing and finishing a wide range of materials light alloys, plastics, foams, laminates or wood. Due to the extremely sharp cutting edge chip removal is particularly smooth and very clean surfaces can be obtained. Depending on the design - up-cut or down-cut - the chips are lifted off or ejected downwards. The surface is polished. SPPW supplies in the diameter range from 1.5mm to 30 mm.
                                              • Carbide End Mills for Special Applications

                                              • End mills for special applications SPPW solid carbide end mills are suitable for very different applications, e.g. for machining fiber fabric materials, such as aramid (Kevlar), but also for aluminum composite plates (Di-Bond) or for chamfering.
                                              • Carbide End Mills for Honeycomb

                                              • SPPW HSC end mills made of solid carbide are used for machining warp materials and composites. Due to their special toothing, with drawing cut, the so-called multiflute face toothing, the surface remains in excellent condition after machining for immediate further machining. This is further enhanced by the extremely sharp cutting edges. SPPW supplies in the diameter range from 6mm to 24mm and additionally 44mm on special order.
                                              • Carbide End Mills for FRP

                                              • SPPW offers cutters exclusively for fiber plastics, fiber composites. Machining is made possible on the one hand by the counter-rotating flutes with chipbreakers or on the other hand by a large flute with synchronous chipbreakers. This results in a simultaneous pulling and pushing cut or a continuous cut with good chip removal SPPW offers cutters for fiber composites in Dia.HC or diamond surface coating or polished surface, in the diameter range from 2mm to 12mm.
                                              • Carbide Pyramide Cut End Mills

                                              • SPPW solid carbide pyramid toothed cutters have extremely sharp cutting edges and have a pulling cut, due to the pyramid cross toothing at the tip and are excellent for grooving and face milling of fiber plastics with high fiber content up to sandwich materials and foams. It is also suitable for copy machining through the face radius, as well as for drilling and hemming, also for fiber plastics with high fiber content and fiber plastics with adhesive tendency. SPPW supplies pyramid toothed cutters with Dia.HC surface coating or polished surface, in diameter range from 2mm to 20mm.
                                              • Carbide End Mills for Graphite

                                              • SPPW solid carbide pyramid toothed cutters have extremely sharp cutting edges and have a pulling cut, due to the pyramid cross toothing at the tip and are excellent for grooving and face milling of fiber plastics with high fiber content up to sandwich materials and foams. It is also suitable for copy machining through the face radius, as well as for drilling and hemming, also for fiber plastics with high fiber content and fiber plastics with adhesive tendency. SPPW supplies pyramid toothed cutters with Dia.HC surface coating or polished surface, in diameter range from 2mm to 20mm.
                                              • HSS-E End Mills for NF-Metals

                                              • Faster machining of difficult plastics and light metalsSPPW Rapid Line offers the solution for machining plastics and light alloys in lightweight constructions.Rapid Line cutters are characterized by special geometries and properties, such as the finely lapped flute and their special cutting geometry. The improved surface finish prevents subsequent polishing and the favorable coefficient of friction prevents overheating and welding. The product variety covers micro cutters, end mills, high performance cutters, radius cutters, cutters for aramid fiber materials, aluminum composite panels, honeycomb composites and fiber composites, pyramid toothed cutters and cutters for granite materials.SPPW Rapid Line is offered in different coatings to provide the best solution for the respective cutting process.
                                            • Carbide End Mills

                                              • Solid carbide end milling cutters for high-performance machining and trochoidal milling as well as universal milling cutters. HPC, HSC and TDC milling cutters with corner radius or corner chamfer for applications in mould making or in refractory alloys.
                                                  • Carbide HPC End Mills

                                                  • SPPW high performance solid carbide end mills have X.Cut surface coating for more surface hardness and simplifies you roughing and finishing work with hard materials, with better cutting data and longer tool life. SPPW offers HPC flute end mills and HPC peripheral end mills with optimized conical chip chamber, as well as torus end mills with high chip volume and smooth running due to the unequal pitch of the face cutter with corner radius. In addition, they feature fine locking after the cutting edge and high feeds and depths of engagement. SPPW supplies high-performance solid carbide cutters in the diameter range from 3mm to 25mm, also especially for aerospace materials.
                                                  • Carbide HSC End Mills

                                                  • SPPW HSC cutters made of solid carbide are finishing cutters and torus cutters, with X.Cut surface coating and are used for machining hardened steels and structural steels. Various short versions are available, such as sharp-edged with a smooth shank according to DIN 6535 HA and with corner radius, as well as long and extra-long versions with a smooth shank according to DIN 6535 HA and corner radius. SPPW offers HSC cutters in the diameter range from 2.5mm to 20mm.
                                                  • Carbide Universal End Mills

                                                  • SPPW universal solid carbide end mills are slot milling cutters, pocket milling cutters, circumferential milling cutters and cutters and machine a wide range of materials. They have from two to four cutting edges with a smooth shank according to DIN 6535 HA or HB. SPPW offers extra-long designs with a long cutting edge and short designs, some with an X.Cut surface coating. This ranges in diameter from 3mm to 20mm.
                                                  • CARBIDE HPC MILLING CUTTERS - TORPEDO

                                                  • Solid carbide end milling cutters for high-performance machining and trochoidal milling as well as universal milling cutters. HPC, HSC and TDC milling cutters with corner radius or corner chamfer for applications in mould making or in refractory alloys.
                                                  • Carbide TDC Miling Cutters - TROCHOID

                                                  • Solid carbide end milling cutters for high-performance machining and trochoidal milling as well as universal milling cutters. HPC, HSC and TDC milling cutters with corner radius or corner chamfer for applications in mould making or in refractory alloys.
                                                  • Carbide Barrel Miling Cutters

                                                  • Solid carbide end milling cutters for high-performance machining and trochoidal milling as well as universal milling cutters. HPC, HSC and TDC milling cutters with corner radius or corner chamfer for applications in mould making or in refractory alloys.
                                                • HSS-E / PM End Mills

                                                  • Slot milling cutters, finishing milling cutters and roughing cutters made of HSS-E and powder metal for conventional milling cutters in steel, stainless steel, aluminium or light alloys. Miniature milling cutters from diameter 0.3 mm - 1/10 increments available from stock, shell end mills and disc cutters at short notice.
                                                      • HSS-E05 Micro End Mills

                                                      • SPPW Micro drill flute cutter made of high speed steel, with eight percent cobalt content, is suitable for general use on steels, but also on other materials such as aluminum. This drill flute cutter features a center cut, intended for plunging, and a reinforced shank. SPPW is a pioneer in the field of micro-machining, thanks to the Micro Drill Groove Cutter made of HSS-E05, as the tool is available from a diameter of 0.3mm up to 14mm and has a tenth of a pitch (0.1mm).
                                                      • Powder Metal HPC End Mills

                                                      • SPPW HPC cutters made of powder metal are high-performance roughing cutters with maximum chip removal capacity, for machining stainless steels and tough-hard materials and HPS machining with large chip volume. HPC cutters have a center cut with protective chamfer, fine roughing teeth and a shank according to DIN 1834 B with clamping surface. SPPW supplies in diameter range from 6mm to 32mm, with X.Cut surface coating.
                                                      • HSS-E08 End Mills

                                                      • SPPW cutters made of HSS-E08 are end mills, roughing cutters and drill flute cutters for general use and also for lecht alloy, non-ferrous metals and tough-hard materials. The cutters have a center cut, for plunging and are hundredth rising. Their shank, according to DIN 1835 B, has a chip face with X.Cut surface coating or blank surface. SPPW supplies extra short, short, long and extra long versions, in the diameter range from 1.5mm to 32mm.
                                                      • HSS-E08 Radius End Mills

                                                      • SPPW radius cutters are suitable for general application. They are slot cutters, copy cutters and pocket cutters, with a center cut of tolerance k10. SPPW offers radius cutters made of HSS-E05 with an X.Cut surface coating, in short and long versions, with a short cutting edge. Radius cutters are available from a diameter of 3mm to 20mm.
                                                      • HSS-E08 Shell End Mills

                                                      • SPPW shell end mills made of HSS-E05 are used for drilling with a transverse flute for the general materials. The drilling process is performed by a 30 degree helix with finishing teeth or roughing teeth type NR. The tool is available with X.Cut surface coating or bright surface. SPPW offers shell end mills in the diameter range from 40mm to 100mm.
                                                    • Thread Mills

                                                      • Thread milling cutter with deburring step for internal threads and external threads for M/MF (metric), UN (unified), G, PG, NPT, NPTF and NPSF threads. Thread whirlers for metric and UN threads from diameter M 0.8.
                                                          • Micro-Mini-Carbide Thread Whirling Cutter

                                                          • SPPW Micro thread whirlers made of solid carbide, with 60 degree part profile for M and MF threads, are especially suitable for high-strength materials due to their low cutting pressure. They have the maximum degree of fineness and can only be used with a powerful CNC control. Micro thread whirlers made of solid carbide have an X.Cut surface coating, which makes the tool more efficient and durable. SPPW supplies these in the diameter range from 0.8mm to 10mm.
                                                          • Carbide Thread Mills for Internal Threads - M - UN

                                                          • SPPW high performance solid carbide internal thread milling cutters are universal milling cutters, especially for metric threads and UNC (unified national coarse)/UNF (unified national fine) internal threads. The tool has a deburring step for burr-free threads and allows threading and deburring in one step. They feature a 15-degree helix for a smoother cut and an X6.Cut surface coating for greater performance. SPPW supplies solid carbide internal thread mills in diameters ranging from 0.4mm to 10mm.
                                                          • Carbide Thread Mills for External Threads

                                                          • SPPW high performance solid carbide external thread milling cutters are specially designed for machining ISO metric external threads. With their special geometry, your work is streamlined as thread cutting and deburring are possible in one step. SPPW supplies solid carbide external thread milling cutters with an X6.Cut surface coating, from diameter 10mm to 16mm.
                                                          • Carbide Thread Mills for Int./External Threads

                                                          • SPPW high performance internal/external thread milling cutters are used for machining tapered internal/external threads, according to BSPT and NPSF. Due to their special geometry, thread cutting and deburring can be done in one operation, where the X6.Cut surface coating makes the thread cutter even more conductive and robust. SPPW supplies the high performance internal/external thread milling cutter in the diameter range from 6mm to 20mm.
                                                          • Carbide Conical End Mills for Pipe Taper

                                                          • SPPW solid carbide end mills, are comical with a sixteenth pitch, and are suitable for pre-milling on tapered threads type BSPT, NPT, NPTF and NPTS. The end mill thus allows simultaneous chamfering of the thread.
                                                          • Carbide Coolant Feed Drills + Thread Mills Int. Threads

                                                          • SPPW solid carbide drill thread milling cutters have internal cooling suitable for ISO metric internal threads. The drill thread milling cutter enables drilling, thread milling and application of 45 degree chamfers in one operation. In order to perform machining with this drill thread milling cutter, a stable clamping is required. SPPW supplies its drill thread milling cutters in a diameter range of 4.2mm and 18mm, without coating or with X.Cut surface coating.
                                                          • Modular Thread Mills and Inserts

                                                          • SPPW base bodies for thread milling cutters are specially designed for the use of straight inserts. The body is highly flexible, because with several milling plates, made of different materials, the thread cutting is simplified. With SPPW body you have the possibility to cut a wide range of threads. The body is made of steel and is therefore not only cheaper than other products where the cutting edges are not modular, but also a better less brittle, which promises a long service life. SPPW offers basic bodies according to types A, with only one cutting edge, B, with two cutting edges and type C, with four to five cutting edges. The diameter range is from 12mm to 48mm.
                                                          • Modular Thread Turning Tools

                                                          • SPPW basic bodies for thread turning are specially designed for internal thread turning tools. The body is highly flexible, because by changing the plates can be worked a variety of threads, in several materials. The body is made of steel and is therefore not only cheaper than other products where the cutting edges are not modular, less brittle, which promises a long service life. SPPW offers bodies in WSP between 6mm to 27mm and some with internal cooling.
                                                          • Modular Thred Turning Tools Type U

                                                          • SPPW offers a wide range of inserts for various machining operations, such as external cutting, internal cutting, threading and thread milling. They are made of solid carbide and have an X.Cut surface coating. SPPW inserts are ideal for inserting into thread milling and thread turning bodies. The inserts are available straight and twisted.
                                                        • Threading Tools

                                                          • Taps and thread formers for a wide range of materials, such as stainless steel, titanium, aluminium and plastics. For threads M/MF (metric), UNC/UNF (unified), G (pipe), PG, BSW/BSF (british), BSPT (taper). Supplemented by hand taps and dies.
                                                              • HSS-E Mini Taps and Forming Taps

                                                              • SPPW taps are made of powder metal high speed steel, and the small high speed steel version, for machining blind holes and through holes. They have high cooling groove for more stability and A.Cut and C.Cut surface coating, which promotes good cold formability. SPPW supplies in the diameter range from 1mm to 16mm and are available up to M10, according to DIN 371, with reinforced shank. In addition, taps are supplied with cooling grooves for better lubricant transport or without cooling groove for more stability.
                                                              • FlashCut Taps and Forming Taps

                                                              • SPPW taps are made of powder metal with A.Cut and C.Cut surface coating, especially for machining long-chipping materials or cast materials, as well as for stainless, alloyed or hardened steels. They have a peeling cut for through holes or are twisted for the production of blind holes. They also have exposed teeth or a flank grind, for lower torque. SPPW offers taps in the diameter range from 1mm to 16mm, with reinforced shank up to M10.
                                                              • HSS-E Taps - Miscellaneous

                                                              • SPPW high speed steel taps with X.Cut or A.Cut surface coating, vaporized or bright surface and copper alloy, are for general use and are also suitable for aluminum and steels. Taps produce blind holes and through holes of all types, as they have a short lead, with 2 to 3 threads, and long lead, with 3 to 5 threads. From a diameter of M30 the taps are made of HSS and up to a diameter of M10 they have a reinforced shank, according to DIN 371. SPPW also offers taps HSS/-E in long version with overflow shank for access holes, as well as taps with flank angle of 55 degrees and 60 degrees, according to British dimensions. This is available from G 7/8" in HSS and also tapered with a sixteenth pitch. SPPW taps with exposed teeth or flank grinding have an extremely low torque and are the only taps in the range with a coating or alloy.
                                                              • HSS Hand Taps

                                                              • SPPW hand taps are suitable for steels up to 800 N/mm². A set contains two to three straight fluted tools for blind holes and through holes. Hand taps are sorted into rough taps, center taps and finish taps and are uncoated. SPPW offers hand taps in sets ranging in diameter from 1mm to 68mm.
                                                              • HSS / HSS-E Dies

                                                              • SPPW dies are made of high-speed steel and are used for the production of external threads or pipe threads. The design is metric and left-hand cutting, with easy tapping and clean chip removal. Dies are available in diameters from M1 to M68. SPPW offers not only the closed form with 6g, the common tolerance, but also with tolerance AB (medium coarse), from diameter G1/2" to G4". Intermediate dimensions in M and MF are supplied by SPPW upon your request.
                                                              • HSS-E Taps - Other Thread Profiles

                                                            • Modular Tools

                                                              • Modular tools with interchangeable inserts for centering, spotting, countersinking, drilling, engraving and deburring. Particularly stable mounting of the cutting inserts for highest accuracy and tool life. One shank holds different inserts for different applications.
                                                                  • Center Drills

                                                                  • Modular tools with interchangeable inserts for centering, spotting, countersinking, drilling, engraving and deburring. Particularly stable mounting of the cutting inserts for highest accuracy and tool life. One shank holds different inserts for different applications.
                                                                  • NC Spotting Drills

                                                                  • Modular tools with interchangeable inserts for centering, spotting, countersinking, drilling, engraving and deburring. Particularly stable mounting of the cutting inserts for highest accuracy and tool life. One shank holds different inserts for different applications.
                                                                  • Corner Rounding Cutters

                                                                  • Modular tools with interchangeable inserts for centering, spotting, countersinking, drilling, engraving and deburring. Particularly stable mounting of the cutting inserts for highest accuracy and tool life. One shank holds different inserts for different applications.
                                                                  • 4-in-1 Counter Bores

                                                                  • Modular tools with interchangeable inserts for centering, spotting, countersinking, drilling, engraving and deburring. Particularly stable mounting of the cutting inserts for highest accuracy and tool life. One shank holds different inserts for different applications.
                                                                  • Chamfering Tools

                                                                  • Modular tools with interchangeable inserts for centering, spotting, countersinking, drilling, engraving and deburring. Particularly stable mounting of the cutting inserts for highest accuracy and tool life. One shank holds different inserts for different applications.
                                                                  • Cutters wit Polygonal Interface

                                                                  • Modular tools with interchangeable inserts for centering, spotting, countersinking, drilling, engraving and deburring. Particularly stable mounting of the cutting inserts for highest accuracy and tool life. One shank holds different inserts for different applications.
                                                                  • Accessories

                                                                  • Modular tools with interchangeable inserts for centering, spotting, countersinking, drilling, engraving and deburring. Particularly stable mounting of the cutting inserts for highest accuracy and tool life. One shank holds different inserts for different applications.
                                                                  • Engraving Inserts

                                                                  • Modular tools with interchangeable inserts for centering, spotting, countersinking, drilling, engraving and deburring. Particularly stable mounting of the cutting inserts for highest accuracy and tool life. One shank holds different inserts for different applications.