MICROELECTRONICS 21XX e-Fair  Navigation : EXPO21XX.com Home > MICROELECTRONICS 21XX > e-Hall > CONEC
 
Home Register your company About us Contact us
Home back to hall map back to hall   
Go to Search Go to Search
      C      
 
1
C1    Germany CONEC
 
 
 
 Show Screen  
 

  
 Offer Profile  
As a leading connector manufacturer. CONEC develops, produces and markets connectors worldwide to the electronic and communication industry. Conec is committed to contribute to progress in interconnect technology, and to satisfy and delight customers through innovation, quality manufacturing and superior service.
 Product Abstract  
Connectors & Adapters
Conec Connector Products are manufactured in several manufacturing locations, all are ISO Certified and Registered and follow a high TQM Standard.
 
Filter Connectors and Adapters
  • C-Filter Connectors and Adapters
  • C-Filter Combination                  D-Subminiature Connectors
  • L-Filter D-Subminiature Connectors and Adapters
  • LC-Filter Connectors and Adapters
  • PI-Filter Connectors and Adapters
  • Filter Plates
Sealed Industrial Ethernet Circuit IP67 RJ45 Connector System
The sealed Industrial Ethernet circular IP67 RJ45 connector system is designed for use in harsh environments. The connector features bayonet coupling mechanism conforming to IEC 61076-3-106 standard. It provides fast but reliable connections in harsh environment.

There are 2 versions (Plastic version and Metallized version) available for this connector system.

New designs utilizing high speed high performance microprocessors, higher levels of integration and more complex functions demand more stringent rules in design and circuit layout to overcome problems as they relate to EMI/RFI.

D-Subminiature connectors, commonly used for interface connectors, do not provide protection from EMI/RFI interference, even when enclosed in shielded hoods. A filter incorporated on the printed circuit board often does not overcome this problem.

RJ45 Modular Jacks And Plugs
  1. Very Low Profile PCB Jack (Side Entry))
  2. Very Low Profile PCB Jack (Side Entry, Shielded W/Tab, SMT)
  3. Very Low Profile PCB Jack (Side Entry, Shielded W/Pin, SMT)
  4. Side Entry PCB Jackk
  5. Side Entry PCB Jack (Shielded)
  6. Side Entry Jack With Ferrite
  7. Side Entry PCB Jack
  8. Side Entry PCB Jack (Shielded)
  9. Multi-port PCB Jack (RJ45,Unshielded)
  10. Multi-port PCB Jack (RJ45, Shielded)
  11. Multi-port PCB Jack (Stacked, Unshielded)
  12. Multi-port PCB Jack (Stacked, Shielded)
  13. Multi-port PCB Jack (Stacked, Low Profile,Shielded)
  14. Side Entry SMTJack With Solder Pad
  15. Modular Coupler Jack (Shielded)
 
RF / Coaxial Connectors
  • SMA Connectors
  • SSMA Connectors
  • BNC Connectors
  • TNC Connectors
  • N Connectors
  • MCX Connectors
  • MMCX Connectors
  • Between Series Adapters
  • D-Sub Coaxial Contacts
  • DIN Coaxial Contacts
  • D-Sub High Power and High Voltage Contacts
  • DIN High Power Contacts
Water Resistant Connectors

Electronic equipment that is used in harsh outdoor or indoor environments, require connectors that can withstand moisture, dust and other elements that cause connectors to fail. CONEC has developed the new water resistant connector system.
This new series includes the standard configuration, high density, combination family and filtered for water resistant connector applications.
Automotive Connectors
  • Automotive Modular Quick Connect Type Connector
  • Automotive Type Pin and Socket Interconnect
  • Automotive Type Connector for use with Auto-Test Module
  • Automotive Type Connector for Powerseat Applications
  • Automotive Communication Interconnect R/F and Signal Contact
  • Automotive Connector with Filtering for EMI/RFI
 
Fiber Optic
  • Fiber Optic Connectors
  • Fiber Optic Adapters
  • Fiber Optic Hybrid Adapters
  • Fiber Optic Outdoor
  • Fiber Optic Cable Assembly
  • Fiber Optic Connector Assembly Tools
  • Fiber Optic Technical
  • Terms Customer Specific Connectors and Assembly
D-SUB (D-SUBMINIATURE) CONNECTORS / ACCESSORIES
  • plug and socket connector saver d-sub connectors standard and high density
  • solder cup standard d-sub (d-subminiature) connectors
  • solder pin straight standard d-sub (d-subminiature) connectors
  • wire wrap standard d-sub (d-subminiature) connectors
  • solder pin angled standard d-sub (d-subminiature) connectors
  • high density d-sub (d-subminiature) connectors
  • d-sub idc for flat cable
  • dual port standard d-sub (d-subminiature) connectors
  • crimp contacts / crimp body d-sub connectors standard and high density
  • accessories / mounting hardware for d-sub connectors
  • tools
COMBINATION D-SUB/MIXED LAYOUT CONNECTORS
  • d-sub combination connectors
    shell sizes / ordering code system
  • socket connectors
  • plug connectors
  • plug and socket connector crimp
  • signal crimp contacts
  • hoods for use with d-sub combination connectors
  • high power contacts
  • high voltage straight and angled contacts
  • coaxial contacts
  • hole pattern for coax contacts
    tools
     
 
SCSI Connectors
  • SCSI 2 Male IDC With Hood With Jackscrews
  • SCSI 2 Male IDC With Hood With Single Hand Release
  • SCSI 2 Male Solder Type With Hood With Single Hand Release
  • SCSI 2 Female IDC Type With Hood With Single Hand Release
  • SCSI 2 Female IDC With Hood With Jackscrews
  • SCSI 2 Male IDC
  • SCSI 2 Female IDC
  • SCSI 2 Female Right Angle PCB Connector With PCB Clips
  • SCSI 2 Female Right Angle PCB Connector
  • SCSI 2 Male Centronic IDC With Hood With Single Hand Release
  • SCSI 2 Male Centronic IDC With Hood With Jackscrews
  • SCSI 2 Male Centronic Solder Type With Plastic Hood With Single Hand Release
  • SCSI 2 Male Centronic Solder Type With Hood With Single Hand Release
  • SCSI 2 Male Centronic IDC
  • SCSI 2 Female Centronic RIght Angle PCB Connector With PCB Clips
  • SCSI 3 Female IDC With Threaded Inserts
  • SCSI 2 Female IDC With Threaded Inserts and Locking Tab
  • SCSI 3 Male IDC All Plastic Version
HOODS / BACKSHELLS
  • d-sub full metal hoods
  • d-sub plastic and metallized hoods
  • d-sub metallized hoods
  • d-sub plastic hoods
  • d-sub plastic hoods with internal metal shield
  • water resistant d-sub hoods

     
MALE & FEMALE CONNECTOR DIN 41617
  1. Male connector with straight soldering hooks - Pitch 2.5mm
  2. Male connector with straight solder pins - Pitch 2.5mm
  3. Male connector with straight solder pins - Contact spacing 2.5mm
  4. Male connector with angled solder pins - Contact spacing 2.5mm and 2.54mm
  5. Female connector with solder terminal - Contact spacing 2.5mm
  6. Female connector with solder pins - Contact spacing 2.5mm
  7. Female connector converter - DIN 41617 / DIN 41612-F
 
PRESS FIT CONNECTORS
  1. Type C Connector - Male connector Contact spacing .100" and .200" Press-fit Technology
  2. Mini Type C Connector - Male connector Contact spacing .100" and .200" Press-fit Technology
  3. Mini Type C Connector - Female connector Contact spacing .100" and .200" Press-fit Technology
  4. Type R Connector - Female connector Contact spacing .100" and .200" Press-fit Technology
  5. Mini Type R Connector - Male connector Contact spacing .100" and .200" Press-fit Technology
  6. Mini Type R Connector - Female connector Contact spacing .100" and .200" Press-fit Technology
  7. Female connector - pressfit type
  8. Male connector - pressfit type
  9. Connector bridge system
Computer Connectors
USB, D-Sub, SCSI, IEEE 1394, DVI, Flash Card, ZIF FFC / FPC, P&D, Memory Stick and other connectors
 
  1. D-Sub Surface Mount Connector 9 Position Male Type
  2. D-Sub Surface Mount Connector 9 Position Female Type
  3. IEEE 1394 Connector 6pin Solder Type
  4. MINI USB Connector 4pin SMT Type
  5. USB Connector A Type PCB R/A SMT 17. USB Connector A Type PCB R/A SMT (male)
  6. USB Connector A Type PCB R/A (triple)
  7. USB Connector A Type Upright Thru-Hole
  8. USB Connector A Type PCB Thru-Ho
FLAT CABLE SYSTEM
DIN 41651 Flat Cable Connector
  1. Header with straight solder pins - with long, short or without latch
  2. Header with angled solder pins with long, short or without latch
  3. Low profile header with straight solder pins
  4. Low profile header with right angle solder pins
  5. Socket connector

System Flat Cable Connector System

  1. DIP connector
  2. Printed circuit board connector
  3. Female connector DIN EN 60603 (41612) for flat cable
  4. D-Subminiature connector for flat cable IDC socket connector (industrial version)
  5. etc.

Pin Header Flat Cable System

  1. Pin header straight type contact spacing .100"
  2. Pin header right angle contact spacing .100"
  3. Pin header with double hood contact spacing .100"
 
Advanced TCA Connectors
  • Press-Fit Connectors
  • Solder Pin Connectors
  • Accessories
  • Press-Fit Tools
Compact PCI Connectors
  1. CompactPCI connectors 38 position series
  2. CompactPCI connectors 47 position series
TEST & MEASUREMENT CONNECTOR SERIES
This first generation design and construction consists of 2 x 4 positions with 2.54 mm (0.100") contact spacing. The connectors are available with solder type or screw clamp terminals. The colour coded snap latch locking system allows the use of several connectors on the same panel. Strain relief and rubber sleeves are provided for added reliability.
 
CONNECTOR ACCESSORIES
  1. Hex locking screws and hardware
  2. Gender changer for special applications - configuration of pins 1 : 1
  3. Screw locking / clamp
  4. Slide-lock with locking bolts
  5. Snap Locking system
  6. Spring locking
  7. Plastic dust cap for all d-subminiature size
  8. Shielded plastic cap for EMI/RFI as well as ESD resistant and anti-static
  9. Covered screen cap for EMI/RFI
  10. Covered screen cap with clamp and screw
  11. Covered screen cap with Jack screw
  12. Water resistant shielded caps for EMI/RFI with clamp and screw
  13. Water resistant shielded caps for EMI/RFI with Jack screws
  14. Rubber boot for water resistant D-subminiature hoods and sealing grommet for front panel mounted water resistant D-Subminiature hoods
  15. Locking system usable for all D-Subminiature sizes
ASSEMBLY AND INSTALLATION TOOLS
  1. Hand cutting scissors for flat cable
  2. Tooling set for manually operated lever press
  3. Manually operated lever press
  4. Tooling for removal for D-Subminiature standard contacts
  5. Insertion and Extraction Tool for D-Subminiature High Density screw machine type contacts
  6. Separate Crimp plier for D-Subminiature standard contacts
  7. Hand Crimp tool with insert for high power contacts
  8. Inserts for above hand crimp tool
  9. Hand crimp tool for right angle power contacts
  10. Spool Crimp plier for D-Subminuature standard contacts
  11. Extraction tool DIN EN 60603 (DIN 41626) for high power and coaxial contacts
  12. Insertion and extraction tool for D-Subminiature crimp and signal contacts
  13. Extraction tool D-Subminiature for coaxial, high power and high voltage contacts

and many more...
SAL Sensor Actor Line M12 x 1 Circular Connectors
 
  • Round connector, moulded
  • Round connector, field attachable
  • Sockets
  • Junction-boxes
  • Round connector for special applications / High-temperature
  • Round connector for special applications / Food&Beverage
  • Round connector for Profibus DP
  • Round connector for Industrial Ethernet100MHz

 The dimensions and construction of the CONEC SAL connector series comply with IEC 61076-2-101. They are used in many applications in the field of automation technology, e.g. for simple signal transmission and power transmission or for data communication in field bus technology.
The series comprises connectors with integral wires and assembly-ready constructions with different connection types in axial and angled configurations. A comprehensive range of flanged connectors/adapters are available for the device.

 
 

2
  
   
      E      
Exit the Hall  Exit to Hall CONEC   Exit to Hall   Next Corridor 6-10