| Linear actuators |
| electrically
driven linear modules with toothed belt or caged ball ballscrews in low rise
building construction or as compact module |
|
 |
 |
 |
System 70 - LLE70
compact module driveless |
-high guide precision by rail guidance
-with one or double carriages
-aluminium profile with slots
-completely covered
profile cross section 70x70mm
max. profile length 3500mm
max.perm.center force F 500N (each carriage)
max.perm.axial force Fx 500 N
1 carriage double carriage
Mx 20Nm 40Nm
My 30Nm 120Nm
Mz 20Nm 68Nm
|
|
LHLE70
compact module with caged ball ballscrew |
-high guide precision by rail guidance
-precision caged ball ballscrew
-optionaly with one or two carriages
-aluminium profile with slots
-completely covered housing
profile cross section 70x70mm
max. travel 1210mm
max.perml.centr.force F 500N (one carriage)
max.perm.axial force Fx 500N
repeatability +/- 0.02mm
positioning accuracy +/- 0.05mm |
|
LSLE70
compact module with toothed belt drive |
-high guide precision by rail guidance
-optionaly with one or two carriages
-aluminium profile with slots for attachment
-completely covered housing
profile cross section 70x70mm
max.profile length 3500mm
max.perm.centr.force F 500N (one carriage)
max.perm.axial force Fx 500N
repeatability +/- 0.03mm
positioning accuracy +/- 0.15mm |
|
 |
 |
 |
MSLE80
compact module with special
toothed belt |
-high guide precision by rail guidance
-high speed with exact positioning
-high-strength aluminium profile with slots
profile cross section 80x80mm
max.profile length 6800mm
max.perm.centr.force F 1600N (1 carriage)
max.perm.axial force Fx 1300N
repeatability +/- 0.05mm/1000mm
(depends upon load,travel and motor) |
|
HSLE100
compact module with special
toothed belt |
-high guide precision by rail guidance
-high speed with exact positioning
-high-strength aluminium profile with slots
profile cross section 100x100mm
max.profile length 7000mm
max.perm. force F 2000N (1 carriage)
max.perm.axial force Fx 1500N
repeatability +/- 0.05mm/1000mm
(depends on load, travel and motor) |
|
LE16
flat compact linear unit |
-not driven linear unit used as simple
sliding unit or for supporting axis for systems
-guiding shafts with 4 linear bushing/carriage
-aluminium cover maintenance-free
-double load possible by double railed linear bushing as an option by same size
shaft diameter 16mm
max. profile length 3500mm
max.perm.centr.force F 2000 N/ carriage
(4000)
max.perm.axial force Fx 500N |
|
 |
 |
 |
HLE16
flat compact linear unit |
-precision caged ball ballscrew with standard pitch 5 or
10 mm (optional 16 or 50 mm)
-guiding shafts with 4 linear bushing
-aluminium cover maintenance-free
-double load possible by double railed linear bushing as an option by same size
positioning accuracy up to +/- 0.05mm
vmax. up to 1m/s (dep. on pitch)
max.perm.centr.force F 2000 N/ carriage
(4000)
max.perm.axial force Fx 500N (1000N forced) |
|
SLE16
flat compact linear unit |
-tooth belt driven
-guiding shafts with 4 linear bushing
-aluminium cover maintenance-free
-double load possible by double railed linear bushing as an option by same size
positioning accuracy +/-0.3mm
v.max up to 2m/s
max.perm.centr.force F 2000 N/ carriage
(4000)
max.perm.axial force Fx 500N |
|
FHLE
flat compact linear unit |
-with precise caged ball ballscrew
-guiding devices are 2 rail guidances with 4 carriages in standard for
-high transverse moments by smallest
deflection
-aluminium cover maintenance-free
-pitch standard 5,10mm - 16 and 50mm option
positioning accuracy up to +/- 0.03mm
(depends on pitch)
vmax. up to 1m/s
max.perm.centr.force F 7500 N/ carriage
12000N 2 carriages
max.perm.axial force Fx 500N (1000 forced) |
|
 |
 |
 |
PNLE16
flat compact linear unit |
-pneumatically propelled linear unit
-guiding devices with 4 linear bushing
-aluminium cover maintenance-free
max.perm.centr.force F 2000 N/ carriage
breakaway torque 1 carriage 1.3bar
double carriage 1.5bar |
|
DLE16/DFLE16
flat compact linear unit |
-driven by linear motor unit
-delivered incl. controller,power and cable
-from 8 up to 256 positions programmable
-communication via bus
-2 guiding elements in standard with 4
bushbearings (DLE) or optional 4 rail
guidance carriages (DFLE)
-aluminium cover maintenance-free
max.perm.centr.force F 2000 N/ carriage
max.perm.axial force Fx 80N |
|
HLE20
flat compact linear unit |
-precision caged ball ballscrew with pitches from 5,10,16
to 20mm
-guiding shafts with 4 linear bushing
-aluminium cover maintenance-free
-double load possible by double railed linear bushing as an option by same size
standard forced
perm.centr.load 3500N 7000N
perm.torque (My) 65Nm 330Nm
perm.torque (MX) 190Nm 380Nm
positioning accuracy up to +/- 0.05mm |
|
 |
 |
|
| PLE110 and PLE140 |
-flat compact linear unit with high precision for heavy
loads
-with precise caged ball ballscrew
-pitch standard 5,10,20 and 25mm
-guiding devices are 2 rail guidances with 4 carriages
-high transverse moments by smallest
deflection
-aluminium cover maintenance-free
max. travel up to 700mm
max.perm.centr.force F 17500 N 63000N
max.perm.axial force Fx up to 8000N |
|
VE50
miniature module with spindle |
-high guide precision by large dimensioned rail
-manually or electrically driven
-spindle M10x1 or precision ball thread-
drove 6x1 (optional)
-metal cover
-only 26mm x45mm (h x w)
-stroke length up to 300mm
max. permissible center strength F 100N
max. permissible axial force Fx 80N |
|
|
| Rotary actuators -
NCT-149 / 200 / 299 |
Rotary modules
with single bearing supports for the worm gear shafts in 3 sizes
common characteristics:
-sealed housing in aluminium
-allows any required position
-all rotating elements move within an oil bath, reducing inspection needs
-high axial and radial forces acceptable caused by a well dimensioned
cross-roller bearing
-eccentric cam to minimize backlash
-high tensile materials selected for wormgear
-large dimensioned through bore for pass-through applications
-index marker at the spindle
-optional reference switch
-motor flunge system for several motortypes |
|
 |
 |
 |
| NCT-149 |
transmission ratio 45:1
stat.perm.central load 8500N
stat.perm.tipping mom. 200Nm
stat.perm.torque 150Nm
repeatability +/- 0.01°
concentr.axial run-out <0.01mm
positioning accuracy +/-0.05°
max.pos. speed Vmax 180°/s
max.drive torque 2Nm
weight without motor 5.8kg |
|
| NCT-200 |
transmission ratio 72:1
stat.perm.central load 13500N
stat.perm.tipping mom. 400Nm
stat.perm.torque 500Nm
repeatability +/- 0.01°
concentr.axial run-out <0.01mm
positioning accuracy +/-0.02°
max.pos. speed Vmax 180°/s
max.drive torque 3.5Nm
weight without motor 11kg
|
|
| NCT-299 |
transmission ratio 90:1
stat.perm.central load 45000N
stat.perm.tipping mom. 1500Nm
stat.perm.torque 800Nm
repeatability +/- 0.01°
concentr.axial run-out <0.01mm
positioning accuracy +/-0.015°
max.pos. speed Vmax 150°/s
max.drive torque 5Nm
weight without motor 31.8kg
|
|
| Rotary actuators -
NCT-151-201-301 |
rotary modules
with double bearing supports for the worm gear shafts in 3 sizes
common characteristics:
-sealed housing in aluminium
-allows any required installation positions
-all rotating elements move within an oil bath, reducing inspection needs
-high axial and radial forces acceptable caused by a well dimensioned
cross-roller bearing
-eccentric cam to minimize backlash
-computer optimized wormgear for smoother run and increased efficiency
-high tensile materials selected for wormgear
-large dimensioned through bore for pass-through applications
-index marker at the spindle
-optional reference switch
-motor flunge system for several motortypes |
|
 |
 |
 |
| |
NCT-151
transmission ratio 45:1
stat.perm.central load 8500N
stat.perm.tipping mom. 200Nm
stat.perm.torque 250Nm
repeatability +/- 0.01°
concentr.axial run-out <0.01mm
positioning accuracy +/-0.02°
max.pos. speed Vmax 180°/s
max.drive torque 2Nm
weight without motor 10kg
|
|
| |
NCT-201
transmission ratio 72:1
stat.perm.central load 14000N
stat.perm.tipping mom. 450Nm
stat.perm.torque 600Nm
repeatability +/- 0.01°
concentr.axial run-out <0.01mm
positioning accuracy +/-0.02°
max.pos. speed Vmax 180°/s
max.drive torque 3.5Nm
weight without motor 18.3kg
|
|
| |
NCT-301
transmission ratio 90:1
stat.perm.central load 35000N
stat.perm.tipping mom. 1500Nm
stat.perm.torque 1000Nm
repeatability +/- 0.01°
concentr.axial run-out <0.01mm
positioning accuracy +/-0.015°
max.pos. speed Vmax 150°/s
max.drive torque 5Nm
weight without motor 48.4kg |
|
| Rotary actuators -
HR85 |
-compact aluminium
housing
-weight of module only 1.5kg
-manually or electrically propellable
-any angles of rotation possible
-for smaller loads
-maintenance-poor by grease lubrication
-spindle with index groove
-standard ratio 15:1 further reductions of 4...15...50 possible
-optional reference switch |
|
 |
|
|
|
|
|
|
| Linear axe modules:
Our linear drive units and rotary actuators can be combined all together... |
|
 |
 |
 |
C 
