|
Motors
The family of permanent magnet motors manufactured by
Danaher Motion offers an extremely wide variety of size and package types.
From frameless pancake motors to high acceleration housed/shafted motors,
Danaher Motion offers the most complete range of high performance motors
available today. When you combine our vast selection of motors with our
family of high performance servo or stepper drives, we can satisfy your most
demanding application requirements and "Help you build a better machine,
faster."
|
|
|
|
Brushless Motors
Danaher Motion's brushless servomotors are designed to
operate over a broad range of speeds and have the advantage of reduced
maintenance since there are no brushes or commutators. DC brushless motors
offer superior performance with our highest torque/inertia ratio and high
speed capability of up to 8,000 rpm for standard designs (up to 70,000 rpm
for special designs). Our linear brushless motors can exceed 10 m/s.
|
 |
Stepper Motors
Our high-performance, brushless, maintenance-free step
motors provide very precise, extremely cost-effective motion control. These
2 phase step motors inherently move in small, very precise, 1.8° increments
(200/revolution). This stepping action is simple to control and does not
require complicated, expensive feedback devices.
|
|
Synchronous Motors
Danaher Motion synchronous motors offer substantial
advantages in applications needing their very unique capabilities.
|
|
|
|
DC Motors
Danaher's family of DC motors offers an extremely wide
variety of size and package types. From frameless pancake motors to high
acceleration housed/shafted motors, Danaher offers the most complete range
of high performance motors available today.
|
|
Custom Motor Products
With more than 50 years of experience designing custom
Kollmorgen motor solutions, Danaher Motion provides the latest technological
advancements and application expertise to deliver the broadest capabilities
in the industry.
|
|
Portescap™ Miniature Motors
When it comes to leading edge motion control
applications, Portescap has a wealth of experience and innovative products
to meet your most demanding requirements. We offer extensive prototype
manufacturing facilities staffed by experienced engineers to assist you with
your application-specific requirements.
|
|
|
|
Drives
Danaher Motion has a complete set of drives which
offer advanced control technology along with compact packaging and
simplified commissioning. Choose from a broad selection of AC servo, DC
servo, adjustable speed, stepper, and OEM/custom drive products, all with
models available covering a wide range of input voltage and output power
level.
|
|
|
|
AC Servo Drives
Our AC servo drives are designed to complement our wide
range of rotary and linear three phase brushless servomotors and offer the
broadest connectivity available in the global marketplace today. These
drives bring you advanced control technology along with compact packaging
and simplified commissioning.
|
|
DC Servo Drives
Danaher Motion has a long history of providing DC servo
drives from brand names such as Pacific Scientific, Kollmorgen and IDC to
complement our wide range of DC servomotors.
|
|
Adjustable Speed Drives
Our family of Seco and Acomel adjustable speed drives
accommodate a wide range of AC and DC motor types and power ratings. Many
provide options for running open or closed loop depending on the degree of
control required. Torque and velocity modes are offered and some models
include position control. Whether your application need is from a few
hundred watts (fractional HP) to hundreds of kilowatts (hundreds of HP),
Danaher Motion has a drive to meet your toughest application requirement.
|
|
|
|
Stepper Drives
Our wide range of step motor drives include the
well-known brand names of Pacific Scientific, Superior Electric and IDC.
Offering AC or DC input power versions, these microstepping drives
complement a wide range of stepper motors.
|
|
OEM CD Products
The Custom Electronics Solutions Group specializes in the
design, development and manufacture of servo Amplifier to OEMs. Together
with Danaher's variety of standard and custom motor and actuator solutions,
Custom Electronic Solutions provides a unique total motion solution
capability ranging from motor and servo drives custom built to your
specification - one committed address to an integrated solution.
Field-proven building blocks like the CD Series that have been developed
over the years in the implementation of standard and custom programs are
utilized.
|
|
Custom Drives
The Custom Electronics Products Group specializes in the
design, development and manufacture of custom servo and motion control
systems to OEMs. Together with Danaher's variety of standard and custom
motor and actuator solutions, Custom Electronics Products provide a unique
total motion solution capability ranging from motor and servo drives to
single and multi-axis motion controllers custom built to your specification
- one committed address to an integrated solution. Field-proven building
blocks that have been developed over the years in the implementation of
standard and custom programs are utilized. This enables very fast
turn-around cycle from concept to prototype, still providing a design based
on reliable and proven building blocks of software and hardware while
leveraging cost to a very competitive price solution even though custom.
|
|
|
|
Controls
From Flat Panel Display manufacturing to Automatic
Guided Vehicles, Danaher Motion has a best-fit control solution for your
application.
|
|
|
|
C/BASIC Programmable Controls
C/BASIC Programmable Controls offer machine builders high
performance SynqNet motion control in both PC-based and stand-alone formats
with support for servo and stepper drives. With available SynqNet I/O and a
comprehensive package of programming libraries and software tools, our
C/BASIC programmable controls will help you build a better machine, faster.
|
|
IEC61131 Controls
IEC61131 controls are applied to a wide variety of
machines including, but not limited to packaging, converting, welding,
assembly, winding, routing, robotics, punching and polishing. Danaher Motion
is a supplier to industries where accurate positioning, high speed, and
servo control are required.
|
|
EVS
Controlling the future.
Extensive experience in lift truck and Automated Guided Vehicle (AGV)
applications provides a solid foundation in the development of premier
electric vehicle control technologies. The powerful and flexible control
systems enables manufacturers to concentrate on their core competency;
develop unique vehicle characteristics and get to market faster than ever.
Wireless service and diagnostic options ease vehicle maintenance and reduce
down-time. Consider Danaher Motion your control system specialist.
|
|
|
|
GLMC
Motion Control - Process Control - Logic Control -
Drive Setup
G & L Motion Control systems offer motion controllers, servo motors and
drives, operator interfaces and a host of software to provide a
single-source control solution. These controls are applied to a wide variety
of machines including, but not limited to packaging, converting, welding,
assembly, winding, routing, robotics, punching and polishing.
|
|
|
|
|
|
|
|
Linear Bearings and Guides
Thomson invented anti-friction linear technology over
60 years ago and has continued to lead the industry ever since. The Thomson
brand is recognized and trusted as the global leader in linear motion
technology.
|
|
|
|
Linear Ball Bushing Bearings
Thomson offers the world's largest selection of inch and
metric linear ball bushing bearings. Choose from over nine different
families of linear bearing and linear bearing accessories, all
state-of-the-art and top-of-the-line.
|
|
Linear Speciality Bearings
To meet the often unique needs of your application,
Thomson has developed a number of specialty bearings.
|
|
60 Case LinearRace Shafting
Using Thomson's Roundrail 60 Case Shafting, Supports, and
Assemblies along with Thomson's Linear Ball Bushings, you can increase the
life of your application by 50%. Not all shafting is created equally ....
|
|
|
|
RoundRail Guide Systems
RoundRail Linear Guides are pre-assembled, ready to
install stages providing low friction, smooth, accurate motion for a wide
range of moment or normal loading configurations. Slide tables are available
as customizable RoundRail Linear Guides to multiaxis, turnkey systems
complete with motors, drives, controls and electromechanical accessories.
|
|
Profile Rail Guides
With sizes ranging from our ultra compact 5mm
MicroGuideTM to the robust 55mm 500 Series roller, as well as compliancy
ranging from our self-aligning T-Series (transport profile rail) to the
extremely rigid, machine tool grade roller profile rail, Thomson is your
"one-stop" source for all your profile rail needs.
|
|
|
|
|
|
Ball Screws and Lead Screws
Danaher Motion combines the quality, strength and
expertise of three companies that hold strong and definitive footholds in
the market - Ball Screws & Actuators Co., Tollo Linear and Thomson
Industries - into one source for Thomson Ball and Lead screws.
Thomson invented anti-friction linear technology over 60 years ago and has
continued to lead the industry ever since. The Thomson brand is recognized
and trusted as the global leader in linear motion technology.
|
|
|
|
Ball Screws
Thomson offers the widest range of ball screw products in
the industry – including rolled and ground thread screws in both imperial
and metric sizes. Leverage our broad product capabilities and application
expertise to find the optimal solution for your linear motion requirements.
|
|
Lead Screws
Offering smooth, precise, cost effective positioning,
this is the right solution for your application. Thomson BSA precision lead
screws are an excellent economical solution for your linear motion
requirements.
|
|
Thomson Precision Ball Spline Systems
Thomson precision ball spline systems feature high speed,
anti-friction linear motion under high torsional loads. They have high
reliability under varying operating conditions and predictable life
expectancy.
|
|
|
|
Bearing Supports
Thomson bearing supports provide a unitized package for
simple mounting of Thomson ball screw and ball spline assemblies. Both
"Floating" and "Quick Mount" style bearing supports are available.
|
|
|
|
|
|
|
|
Linear Motion Systems
Linear MOTIONEERINGŽand more... New! From
Danaher Motion
Linear Motioneering
Danaher Motion announces its first web-based application sizing and quoting
tool for many of its Positioning Slide products. Enter application
parameters in five easy steps for just about any slide orientation. Once a
solution set is filtered to fit your application needs, select from a wide
variety of accessories, motors, and motor mounts. Request an online quote
complete with delivery times and ordering information. Click any of the
product categories below and search for the link under the
currently-supported product families.
|
|
|
|
Ball Screw Driven: Ball Guided Units
Danaher Motion's ball screw driven, ball guided
positioning slides by Thomson are designed for robust applications that
demand high thrust andpayloads with a need for high precision accuracy and
stiffness.
|
|
Ball Screw Driven: Slide Guided Units
Danaher Motion's ball screw driven, slide guided
positioning slides by Thomson are designed for high thrust applications with
low cost restrains. They work well in demanding environments with optional
washdown protections.
|
|
Ball Screw Driven: Wheel Guided Units
These products incorporate an internal, self-lubricating
set of plastic bearings in a lightweight aluminum housing. With the use of
flexible seals, the slides work well in industrial-grade applications and
environments by minimizing the effects of contaminates, ensuring long life.
|
|
|
|
Ball Screw Assemblies
The Ball Screw Assemby Model BSA is the finest ball screw
assembly available. Model BSA is an extremely smooth linear actuation system
that is dependable, accurate, and affordable. Model BSA is designed to fit
appropriately sized linear guides and is pre-engineered to meet your system
needs.
|
|
Belt Driven Ball: Guided Units
Belt driven, ball guided positioning slides by Danaher
Motion are designed for smooth travel in dynamic applications requiring high
speed, high acceleration. These families present a long life performance in
the midst of acceleration rates up to 40m/sec2.
|
|
Belt Units: Slide Guided
Thomson's belt driven, slide guided positioning units by
Danaher Motion are perfectly suited for dynamic applications requiring high
speed, high acceleration, low maintenance and smooth travel. These low cost
guide systems optionally adapt to harsh chemical environments.
|
|
|
|
Belt Driven: Wheel Guided Units
Thomson's belt driven, wheel guided products from Danaher
Motion are designed for dynamic applications demanding high speed, high
acceleration but requiring smooth motion with medium to high loads.
|
|
Linear Lifting Units
Thomson's linear lifting units by Danaher Motion are
designed as their name described, lifting loads. These products are capable
of multiple unit combinations for applications requiring X-Y axis.
|
|
Linear Rod Units
Typical applications are where hydraulic and pneumatic
cylinders needs to be replaced by an electrical solution or where a rod type
of unit is preferred. These units are suited for harsh environments and can
be used in typical applications for valve control, plastic industry
machines, and Z-axis in multi-axis systems.
|
|
|
|
Handling Components
Thomson's material handling units are designed for
manual, motorized, and automated equipment use in all kinds of industrial
applications. Any of these products can be used in conjunction with one
another and are also designed to work with MovoZ telescopic linear lifting
units. Based on extruded anodized aluminium profiles, these products are
light, easy to installation, and resistant against chemical corrosion. Being
modular in concept with a wide range of accessories, the units can be
combined to form just about any system handling need. This makes
reconfiguation simple and easy.
|
|
|
|
|
|
|
|
Actuators
At Danaher Motion, we offer a wide variety of
actuators and actuator systems with stroke lengths and load forces to
accommodate a broad range of application needs. In combination with our
selection of AC and DC controls and various motor transmission combinations,
our actuators are designed for the best and most reliable quality
performance for high and low power, industrial and precision applications.
Various actuator and control options and accessories are available to
complete system requirements and to ensure application compatibilities.
|
|
|
|
Linear Actuators
Linear Actuators from Danaher Motion offer best fits for
a variety of general purpose and industrial applications. Designed in
compact housings to fit in the most confined areas, these actuators are
rugged, durable, and ideal anywhere you want to lift, lower, push, pull,
rotate or position a load. They come in a wide range of standard and
customizable stroke lengths and are available in both DC and AC models -
optionally packaged with a wide selection of controls and accessories. Some
of the more common applications include:
- Off-highway mobiles (agricultural, construction, mining, forestry,
road work and railway equipment)
- Turf and garden (lawn mowers, golf carts, tractors, cleaning
machines, sky lifts, other utility vehicles)
- Industrial equipment (conveyors, adjustable work tables/platforms,
hatch-doors-locks opening/closing)
- Health, fitness, medical equipment (handicap vehicles, wheel chairs,
lifting units/beds, gym and therapy equipment)
- Office and home equipment (automatic/garage doors, lifts, gates,
satellite dishes)
- Marine boats, ships, and oil rigs (seats, hatches, fire doors,
rescue equipment, values, throttles)
- Ventilation value controls, process equipment, and many, many
more..........
|
|
Precision Linear Actuators
Precision Linear Actuator systems from Danaher Motion are
ideally designed for linear positioning applications where strong thrust,
high speed, and positioning accuracies are critical. These high-precision,
closed-loop systems have progressed from being a clean and efficient
replacement for hydraulic actuators and pneumatic cylinders to a preferred
alternative to many types of linear transmission. Mounting flexibility
ranges from rigid, externally-guided and supported loads to pivoting loads.
Types of applications include:
- Value Control (process and packaging industry, ventilation
equipment, vehicle applications)
- Linear Guide Positioning (machine tools, electronic industry,
scanning and supervision equipment)
- Edge Guide Control (paper mills, print shop equipment, textile
industry)
- Backstop Adjust (wood work industry, machine tools, metal industry)
- Loading/Unloading (handling equipment, packaging industry, medical
industry)
- Drilling, Welding, Gluing, or Thermo-forming (plastics, metals,
machine tools industries)
- Environments with high degree of airborne contaminants (cleanrooms)
|
|
Worm Gear Screw Jacks
Danaher Motion sets new standards of precision and
engineering with its MULIŽ and JUMBOŽ screw jack products. To fit just about
any application need, these products come in both ball or trapezoidal screw
versions. Designed with the aid of state-of-the art CAD and CAE systems and
manufactured on efficient CNC machines, these jacks meet all of today's
requirements for reliability, safety, cost-efficiency and durability.
|
|
|
|
True Planetary Gearheads
Planetary gearheads are used on high precision motion
control applications which require a high torque to volume ratio, high
torsional stiffness, and low backlash.
Danaher Motion has combined the positive attributes of gear crowning and
helical gearing with planetary construction to create the smoothest
operating gearhead on the market, the UltraTRUE™ True Planetary Gearheads.
Danaher Motion offers these precision planetary gearheads for all duty
cycles, and all with RediMount compliant mounting systems.
|
|
|
|
XTRUE™
The XTRUE™ Series is a new precision gearhead that
compliments the True Planetary™ Gearhead line, already the largest selection
of planetary gearheads in the world.
|
|
NemaTRUE™
In addition to the standard NEMA frame sizes, the
NemaTRUE is now available in three new metric sizes (60, 90 and 115mm) and
has been upgraded with Micron's innovative RediMount system. Micron now
brings you a True Planetary, RediMount compliant gearhead that is an
economical solution for your application. The NemaTRUE has many ratios in
stock for immediate delivery through the Micron Gearhead Express program.
|
|
DuraTRUE™
The DuraTRUE is a high precision, True Planetary gearhead
that utilizes the Micron RediMount system. The DuraTRUE has many ratios in
stock for immediate delivery through the Micron Gearhead Express program.
|
|
|
|
ValueTRUE™
ValueTRUE™ is the new low cost, high performance addition
to the complete line of Micron True Planetary Gearheads, the largest
selection of planetary gearheads in the world.
|
|
UltraTRUE™
The UltraTRUE™ is a helical crowned True Planetary
gearhead. The internal gear is cut directly into the stainless steel housing
to increase torque capacity and avoid slippage. The Helical cut of the gears
provides higher torque capacity, precision and stiffness when compared to
straight cut gears. The UltraTRUE™ has many ratios in stock and available
for immediate delivery though the Micron Gearhead Express program.
|
|
EverTrue™
The EverTRUE™ is a True Planetary, RediMount compliant
gearhead that is designed to run in a continuous duty cycle. This Continuous
Duty gearhead is lubricated for life and rated to last a minimum of 30,000
hours in a 24 hour/day, 7 day/week application.
|
|
|
|
Clutches and Brakes
Danaher Motion has a long history of manufacturing
quality brakes and clutches. Our roots are firmly planted in brand names
such as Deltran, API (American Precision Industries), and Warner PSI
bringing over 100 years of combined manufacturing experience.
Today, our brake and clutch products are working in a wide range of
applications specific to factory automation, material handling, automotive,
aviation, defense, aerospace, medical, office machine, robotics and servo
motor manufacturing industries. These products set the solid foundation for
the broad range of standard and custom products currently available to our
customers.
Danaher Motion’s modern Amherst, NY, facility is ISO 9001/2000 and AS9100B
certified for its Design, Manufacturing, and Assembly of Motion Control
Devices. Our brake and clutch manufacturing experience, technological
know-how, and commitment to bring our customers a quality product, delivered
on time, every time, are some of the reasons that Danaher Motion is the best
choice for your next motion control product.
|
|
|
|
Wrap Spring Clutches and Brakes
Four clutch series include the Solenoid Actuated SAC
Series; the accumulating conveyor clutches, which include the ACCE and the
ACCM Heavy Duty Clutch; and the mechanically actuated basic wrap spring PSI
Series clutch.
|
|
Friction Clutches and Brakes
|
|
|
|
|
|
Precision Balls
All of our products are qualified through our A2LA
lab, the only accredited lab for sphericity in the United States. We also
supply customers who require DFARS, Lockheed and NADCAP compliance. For our
automotive program, all our heat treat suppliers have been audited by an
accredited 3rd party auditor approved by Ford, GM and Chrysler and are in
full compliance. We can leverage over 45 years of application experience and
rapid prototyping to provide the right standard or custom solution to your
project. And we are ISO 9001:2000 resgistered to ensure consistency and
quality in all operations.
We offer ball sphericity within 3 millionths of an inch (0.077 micron), 100%
quality inspection, and a choice of over 27 high performance materials - all
guaranteed to meet or exceed the standards of the American Bearing
Manufacturers Association (ANSI/ABMA Std 10 - 1989).
We manufacture in Bristol, CT, and also import semi-finished products from
low cost regions and do the finishing in our Bristol plant to guarantee
product quality.
|
|
|
|
Product Sets
Mechanical and Electro-Mechanical Integrated
System Solutions
Danaher Motion's technologies define the performance of the world's most
complex and valuable machines. Our system offerings are delivered by
professional engineers dedicated to helping you realize your next generation
machine quickly and efficiently. With a global network of over 6100
employees, over 2000 distributors, and over 2.1 million sq.ft of production
capacity we provide engineering, service, and innovation that no others can
match.
|
|
|
|
AGV Solutions
Today most of the world's top-50 Automatic Guided Vehicle
(AGV) suppliers utilize Danaher Motion systems in their vehicles.
|
|
AKM Gearmotors Product Set
AKM Gearmotors combine the industry-leading torque
density of AKM servo motors with the proven performance of Micron TRUE
planetary gearheads to produce a single factory integrated solution.
|
|
PiCPro Integrated Solution Product Set
By combining processing power, a high-speed integrated
ethernet network, the class-leading capabilities of the conventional AKM
servo motor series, and the optimized control of the cartridge direct drive
technology, the PiCPro Integrated Solution can offer repeatable and reliable
break-through performance. It also represents a well integrated, powerful,
yet cost-effective solution suitable to a wide-range of applications.
|
|
|
|
Air Bearing Rotary
Danaher Motion offers a comprehensive product line of
standard and customized products incorporating air bearing technology.
We provide a broad range of ultra-precision linear translation stages,
rotary spindles, and spin stands. These products are available with a
variety of drive and feedback devices from leadscrews to linear motors, and
optical encoders to laser interferometers.
If you have an application that requires more than a standard product
solution, contact Danaher Motion. Let us put our experience in developing
high performance, cost effective systems to work for you.
For more information about Air Bearing Rotary products please visit
www.dovermotion.com
|
|
|
|
High Precision Stages
From precision linear and rotary translation stages,
to highly-integrated multi-axis systems, Danaher Motion offers the widest
range of electro-mechanical products based upon mechanical bearing way
technologies. Our products are recognized worldwide for precision,
performance and high reliability.
For more information about High Precision Stages please visit
www.dovermotion.com
|
A 
