The Dunkermotoren GR/G range (commutated DC-motors) are notable for:

• High efficiency
• High dynamic acceleration
• Good regulation characteristics
• High power density
• Maintenance-free
• Robust design
• Low moment of inertia
• Motor insulation class E
• Extremely high short time overload capacity of the motor
• Surface protection
• Minimum interference radiation, optional interference versions
• Protection up to IP 67 (GR 42, GR 53, GR 63, GR 80)
• High quality due to fully automated production lines
• Special versions „S“ with increased starting torque are available for many motors sizes

The Dunkermotoren BG range of brushless, direct current motors (EC motors) are notable for:

• Longer life than commutated motors from other manufacturers
• High efficiency
• Highly dynamic acceleration
• Good regulation characteristics
• Wide speed range
• High power density
• Maintenance-free
• Robust design
• Integral Hall sensors for rotor position
• Low cogging torques
• High degree of protection up to IP65
• Motor insulation - Class E
• Neodymium magnets

 

Dunkermotoren’s program of alternating current motors comprises:

• Single-phase capacitor-start motors KD
• Three-phase motors DR
• Venetian-blind drives D

Motors in the KD/DR ranges are noteworthy for their: • Compact design

• Robust construction
• Lifelong freedom from maintenance
• Two and four-pole variants
• Motor KD/DR.1 insulation - Class E
• Motor KD/DR.0 insulation - Class F
• Degree of protection up to IP 54

• Single-phase capacitor motors for short time operation with mounted gear box
• Solidly designed and maintenance free for life
• With comfortable adjustment of the end positions
• Single- and double shaft motors are available
• With integrated (built in) temperature switch
• With integrated electro magnetically brake
• With cable 0.5m and mounted connector

Planetary gearboxes (PLG)
have the highest continuous torque capacity of all types of gearbox; at the same time they have a very compact form, low weight, and excellent efficiency. Self-centering planet gears ensure a symmetrical force distribution. The ring gear also forms the housing of the gearbox. The gearbox output shaft is supported in two ball bearings so that it can withstand high axial and radial loads.

Worm gearboxes (SG)
are noted for their very quiet running. The worm-gear shaft has bearings on both sides. The gear components, made of bronze or steel, and grease lubrication ensure a long service life at the rated torque. In many applications, the location of the output shaft at 90° to the motor shaft provides an optimum design solution. On request, worm-gearboxes can be supplied with a hollow output shaft.

As standard, electrically-released brakes are supplied. Electrically-applied brakes are available on request. IP 54 covers are available for all brakes. Combinations of rotary encoders and brakes are possible. Depending on the motor-brake combination, degrees of protection up to IP 65 can be supplied.

The controllers have been specially designed for optimum regulation of the speed, torque, and position of our dynamic motors.

In order to satisfy all requirements for speed regulation and exact positioning, Dunkermotoren offers analogue tacho-generators (TG), magnetic rotary encoders (ME/MG), digital rotary encoders (RE) and absolute encoders.