LIGHT series: This is the Linear Units with the best ratio between quality and price that you can find today in the market.

Available in three different sizes (30, 50 and 80 mm), it has a self-supporting structure made by a square-section of extruded aluminum.

The distinguishing features of this simple but cost-effective unit, which also guarantees high level of quality, are an AT pitch driving polyurethane belt reinforced with steel wires, ball recirculating linear guides with two preloaded carriages, as well as the "maintenance-free system" above described.

Reduced costs and dimensions mean that this series can be used in sectors where pre-assembled units were once out of question and therefore such as on large production series.

ECO series: low weight, a limited number of components and an extremely attractive price are the main characteristics of this series.

Available in three sizes from 60 to 100 mm, it has a self-supporting structure made by a square-section of extruded and anodized aluminum.

The thrust force is transmitted by a driving polyurethane belt reinforced with steel wires. The carriage is running on a linear guide with two "Maintenance-free" caged-balls blocks or on gothic arch bearings that rolls on grinded and hardened bars.

The linear guide is into the Linear Unit's aluminum body and the polyurethane driving belt acts also as a protection against contaminants.

ELM series: it's highly versatile and, if used with a parallel-kit, it represents the ideal solution to set up synchronized movement systems.

Available in four sizes from 50 to 110 mm, it has a self-supporting structure made by a square-section of extruded and anodized aluminum. The thrust force is transmitted by a driving polyurethane belt reinforced with steel wires. The carriage is running on a linear guide with two "Maintenance-free" caged-balls blocks or on gothic arch bearings that rolls on grinded and hardened bars.

A polyurethane sealing strip guarantees a complete protection of the driving-belt and the linear guide against chips, liquids or other contaminants.

The components used for the movement (lubricant reservoir, caged balls of the blocks, double-lip seals) promote a "maintenance-free" system. ELM is the best product for applications in very aggressive working environments, high speed movement and repeatability

ROBOT series: Particularly suited for heavy loads applications, for stressing work cycles and with the possibility of overhanging or gantry application: these are just some of the main applications that represent the natural working environment of this series.

Available in four sizes from 100 to 220 mm, it has a self-supporting structure made by a rectangular-section of extruded and anodized aluminum. The thrust force is transmitted by a driving polyurethane belt reinforced with steel wires.

The carriage is running on two parallel linear guides and four "Maintenance-free" caged ball blocks or on gothic arch bearings that rolls on grinded and hardened bars.

A polyurethane sealing strip guarantees a complete protection of the driving-belt against chips, liquids or other contaminants.

SC series: This series is specifically designed for vertical movement in gantry applications or in those where the aluminum profile must move, while the carriage remains fixed.

Available in three sizes from 65 to 160 mm, it has a self-supporting structure made by a rectangular-section (square-section for SC 65) of extruded and anodized aluminum.

This is a very stiff vertical system, guaranteed by the use of two parallel linear guides and four "Maintenance-free" caged ball blocks and a very wide driving-belt.

The SC series has been designed for heavy loads and high dynamics applications and to be assembled with the ROBOT series without adaptation plates required.

VR series: to complete its range, ELMORE proposes a unit in which motion is transmitted by a ball screw.

The available size is 140 mm and VR has a self-supporting structure made by a rectangular-section of extruded and anodized aluminum. You can choose among several diameters and different leads of ball screws.

The ball screw, inside the extruded body, is protected by a polyurethane belt specifically designed for this purpose. The carriage is running on two parallel linear guides and four "Maintenance-free" caged ball blocks.

VR has been designed for applications that require high level rigidity and axial thrust.

PRECISION LINEAR STAGE - "T" SERIES: "T" series linear stages, designed for high accuracy linear motion, are produced using anodized extruded aluminum bodies. The tolerances of these aluminum bodies are in accordance with UNI 3879. All assembly and reference surfaces are machined in order to guarantee dimensional tolerance and high accuracy on the running parallelism of the carriage.

So it's possible to achieve a drastic reduction in deviations caused by pitching, rolling and yawing during the entire stroke. The movement is transmitted through a precision ball screws. The carriage is running on two parallel linear guides and four "Maintenance-free" caged ball blocks.

A positioning accuracy within 10 µm and a repeatability within 5 µm make this product suitable for applications with high technical contents. The whole range has four different sizes from 100mm to 325mm, with lengths from 50 mm up to 2200 mm.

EL.MORE delivers and installs Safety Guards - Safety Covers - Accessories and Equipment for machine tools in the engineering sector: Lathes - Drills - Milling Drills - Milling Machines - Grinding Machines - Hydraulic Presses etc., and for other sectors. EL.MORE is your premium consultant for small or large machine guards. The systems protect the operator from coming in direct contact with parts moving on the machine, from fly-away metal parts, tool parts etc. which could break as well as cooling lubricant sprays. Don't hesitate to contact us for protecting your plant.

The Series ONE linear units have been specially designed for CLEANROOMS. The Series ONE linear units are tested by the Fraunhofer Institute for Production Technology and Automation and have clean room ISO 14644-1 or FED STD 209E certification.

These linear units are typically used in:

Semiconductor manufacturing
Pharmaceutical production
Biomedical applications
Research laboratories

Operational areas where contamination would cause production problems or pose a threat to people
This result is achieved by the use of a special protection belt that covers the upper longitudinal opening of the aluminium profile even when the carriages are in motion. By putting around 0.8 bar of low pressure on the end heads the particles generated on the inside are sucked out of the linear unit and conducted outside. This system prevents particles escaping into the immediate environment of the linear unit. The materials from which the components inside the linear unit are made are selected to ensure that as few particles as possible are generated. All the lubricants employed are especially suitable for use in CLEANROOMS or VACUUMS. The Series ONE is available in three sizes: ONE 50, ONE 80, ONE 110 Please, contact us. We'ld like to inform you.