| Gear units |
For our standard
product range we manufacture parts in optimized batch sizes to ensure that we
achieve the best possible price / performance ratio. |
|
 |
 |
 |
 |
| Helical gear units |
FLENDER helical and bevel-helical gear unit series for
horizontal and vertical installation; single- to four-stage, available in 26
sizes.
Power rating 6 up to 4,500 kW
Torque range up to 870,000 Nm
Transmission ratio 1 up to 450 |
|
| Bevel-helical gear units |
FLENDER helical and bevel-helical gear unit series for
horizontal and vertical installation; single- to four-stage, available in 26
sizes.
Power rating 6 up to 4,500 kW
Torque range up to 870,000 Nm
Transmission ratio 1 up to 450 |
|
| Planetary gear units |
FLENDER planetary gear unit series for horizontal and
vertical installation. This series includes more than 27 sizes.
Power rating 30 up to 13,000 kW
Torque 22,000 to 2,600,000 Nm
Transmission ratio 25 up to 4,000 |
|
| Worm gear units |
CAVEX® worm gear units and worm and wheel sets with
concave-profile worm threads; according to the modular construction system.
Power rating up to 800 kW
Torque range up to 360,000 Nm
Transmission ratio 5 up to 4,600 [-]
Centre distances 63 up to 630 mm |
|
| Couplings |
| For more than 80
years, Flender has been making mechanical couplings within torque ranges from 10
to 10,000,000 Nm. |
|
 |
 |
 |
 |
Flexible couplings and
highly flexible couplings |
Flexible pin coupling, available in 10 types and 23 sizes;
product range strictly according to the modular construction system.
Highly flexible ring coupling without torsional backlash; available in 12 sizes. |
|
| Torsionally rigid couplings |
Universal gear coupling for oil or grease lubrication and
shaft misalignments up to 1º.
Sizes 31
Torque Range up to 7,200,000 Nm
Bore Diameter up to 1,000 mm |
|
| Torque limiter |
| To satisfy the high quality demands on AUTOGARD torque
limiters, the development and manufacture of AUTOGARD torque limiters have been
integrated into a qualified quality management system in compliance with DIN ISO
9001 requirements. |
|
| Fluid couplings |
Permanently filled hydrodynamic fluid coupling according
to the Föttinger principle; 15 types and 16 sizes in three series.
Power Rating up to 1,900 kW
Speed upto 5,000 min-1
Outside Diameter 263 to 1,125 mm |
|
| Geared Motors -
MOTOX: Standard motors |
| The MOTOX product
range of Flender Drives & Automation is based on a new modular construction
system comprising the MOTOX-N and MOTOX-G gear unit series, the MODULOG add-on
motors, the motor-integrated MOTOX-Master, MOTOX-Starter frequency inverter and
the MOTOX-Drive frequency inverter. This flexible modular system enables a
quick, reliable and cost-effective solution for your drive application.
Furthermore, this modular construction system provides the basis for custom-made
market-specific solutions. |
|
 |
 |
 |
 |
| Helical geared motors |
MOTOX-N helical geared motors are available in 9 sizes
with nominal torques up to 20,000 Nm and installed power ratings up to 160 kW
and thus offer an optimum size gradation.
Power rating 200 KW
Torque range 20,000 Nm
Tramsmission ratio 1,5 - 70,000 |
|
| Bevel Geared Motors |
MOTOX bevel geared motors are available in 14 sizes with
nominal torques up to 78.000 Nm and installed power ratings up to 200 kW and
thus offer an optimum size gradation.
Power rating 200 KW
Torque range 75,000 Nm
Transmission ratio 4,5 - 70,000 |
|
| Parallel Shaft Helical Geared Motors |
MOTOX-N parallel shaft helical geared motors are available
in 14 sizes with nominal torques up to 75,000 Nm and installed power ratings up
to 200 kW and thus offer an optimum size gradation.
Power rating 200 KW
Torque range 75,000 Nm
Transmission ratio 4,5 - 70,000 |
|
| Helical Worm Geared Motors |
MOTOX-N helical worm geared motors are available in four
sizes with nominal torques up to 1,500 Nm and installed power ratings up to 15
kW and thus offer an optimum size gradation.
Power rating 15 KW
Torque range 1,500 Nm
Transmission ratio 10 - 70,000 |
|
 |
 |
|
|
| Integrated Frequency Inverters |
The MOTOX-MASTER motor-integrated frequency inverter
presents an innovative systems solution with which the philosophy of
decentralizing intelligent drive units is realized.
Power rating 0,37 bis 7,50 KW
Input frequency 50 / 60 Hz
Voltage 380 bis 480 V |
|
| Frequency Inverters |
MOTOX drive systems in combination with the MOTOX-DRIVE
frequency inverter present completely new possibilities.
The MDs are a range of frenquency inverters for controlling sthe speed of three
phase AC motors. |
|
|
|
| Geared Motors -
Industry-specific Solutions |
| The mix of MOTOX
geared motors modular components – very large number of pieces – with special
design components – extremely high demand on technology and economic efficiency
– results in the best possible cost-effectiveness ratio for standard products
and also for Industry-specific series, such as: |
|
 |
 |
 |
 |
MOTOX cooling tower drives standing out due
to their silent running. |
| |
|
| MOTOX agitator and mixer drives with the highest degree
of oil tightness owing to a "dry well principle". |
| |
|
| MOTOX extruder drives with very long bearing life. |
| |
|
| The drives for MOTOX monorail suspension railways with a
coupling integrated into the gear unit to interrupt the flux of force. |
| |
|
| Other Products and
Services |
|
 |
 |
 |
 |
| Electric Motors and Generators |
| The product range covers three-phase motors ranging from
0.1 up to 800 kW for low and high voltage as well as electric drives up to 6000
kW. |
|
| Castings |
Machine and hand mould grey cast iron and spheroidal
graphite cast iron with unit weights
of up to 25,000 kg |
|
| High-speed Gear Units |
High-speed Gear Units (turbo gears) and couplings (turbo
gear couplings and turbo all-steel couplings) for:
- gas turbines
- steam turbines
- compressors
- pumps |
|
| Oil Supply Systems |
Systems for cooling and / or lubricating gear units.
Single or double pump systems are available with air-oil or water-oil coolers as
well as systems mounted on a base frame or a tank. |
|
A 
