The VARICON combines a three-phase AC motor with a frequency inverter. It is available for all common fieldbus systems, the default setting is optimized for general operation, drive parameters are preset and it is equipped with complete radio interference suppression.
Furthermore the VARICON is suitable for a wide speed setting range up to twice the nominal frequency and for 2, 4 and 6 pole designs. Revolutions up to 20.000 rpm are possible with the available sizes from 80 to 100.

The VARICON - a variable speed drive in a rugged housing for versatile applications.

Wherever drives need to be controlled - the motor/frequency inverter combination VARICON is the suitable solution.

The new electrically commutated HANNING synchronous motors are mainly characterized by their compact design and high efficiency, which is especially suited for partial-load operations, and their application specific layout. Synchronous motors are available as enclosed motors in sizes 56 - 132, with varying performance categories up to 7.5 kW.
Versions are also available without enclosures. They feature variable speed settings, total stability and thus a high tolerance against any possible load fluctuations. The rotors are equipped with high-quality permanent magnets and operate without loss.

The new generation of HANNING linear actuators is characterized by its high acceleration values, positioning accuracy and almost wearfree operation as well as high force density and low cogging forces.

The secondary stage can be individually designed according to the required traversing length thanks to a modular system. The extensions are 216 mm each. The motors are available in two sizes and five widths between 100 N and 3500 N. The compact design of the linear actuators is achieved by an innovative winding technique in the primary stage.
The actuators are supplied through an energy chain. A linear path measuring system detects the speed and position of the active primary element while the drive is traversing.

All motor components are enclosed with UL approved potting compounds and can be integrated in many different machinery concepts.

The DriveCCI frequency inverters are available in open design in protection class IP00, enclosed design IP20, and an output power of 3.0 kW. The basic power stages for all single- and three-phase inverters are designed according to the mains and power output and can be combined with various control stages. The integrated RFI filter ensures safe and reliable operation. As an option, an active power factor correction (PFC) can be integrated to ensure compliance with the harmonic current standard EN 61000-3-2 for single-phase mains supply up to 240 V

The DriveMCI series is based on several power stages in two sizes. The frequency inverters are available up to 2.2 kW (single-phase) and up to 4.0 kW (three-phase). They are equipped with either 16-bit or 32-bit microprocessors which ensure perfect interaction between control, drive and frequency inverter.

The DriveLPI frequency inverters are available for a power range of up to 0.37 kW as single-phase units in open design. They are equipped with a power and an interface card as well. The universal interface provides connection for a PLC, IPC or customer-specific solution for controlling the inverter.
A serial RS485 interface and a connection for the HANNING HBT operation unit are integrated on the power card which makes the DriveLPI usable with its basic configuration even without an interface board.
 

The DriveSAS electronic starters for single-phase asynchronous motors are available in two variants, 100 to 120 V and 200 to 240 V. They cover all motor powers, voltages and frequencies.

Modern production sites need intelligent drive components. These drives must be equipped with the latest technology and standards. Furthermore it must be ensured that they can be integrated flexibly into the customer’s drive system. HANNING industrial motors meet all these requirements and are suitable for worldwide application.

HANNING industrial motors are available in foot and flange design (FT and FF) from size 56 to size 132. The 2, 4 and 6-pole motors reach speeds of 3000 / 1500 / 1000 r.p.m. at 50 Hz rated frequency and up to a power of 7.5 kW. As standard the motors are delivered in protection class IP 54 and insulation class F.

Anti-blocking – One of the remarkable features of the rotary-field magnet, a special three-phase asynchronous motor, is its suitability for continuous operation with standstill torque. Being very robust and low in maintenance the rotary-field magnet can, among others, be used as winding motor or as supporting additional drive in the textile or cable industry. It can also be applied for moving and fixing mechanical elements in changing positions.

HANNING's frameless motors are squirrel-cage motors. They are maintenance free and mainly characterized by their rugged design. Two different types are available, the single-phase AC motor up to 2.2 kW and the three-phase AC motor up to 7.5 kW. As standard, frameless motors have protection class F.

The basic version of HANNING oil-immersed motors are 2 and 4-pole three-phase AC motors up to 5.5 kW. Variantsfor single-phase and/or special voltages are available. The standard oil-immersed motor is frame size B3 / B14, it comes with rolling bearings, protection class F and connection cables.

Powerful and quick

The range of HANNING encapsulated linear actuators is headed by the SL 95. It enables pressure and tension up to 12,000 N and traversing speeds up to 42 mm/s or 50 mm/s which almost remain constant even at rated load.

The SL 95 linear actuators are ideal drives for a powerful and safe adjustment of therapy tables and many more medical and industrial applications. The reliable and rugged linear actuator can be adapted to the requirements. Different stroke lengths are possible. They can be individually controlled by either the patented HANNING pneumatic control or electrically.

As option, the linear actuators are also available with a declutch system. The power transmission can be interrupted in one direction so that the traversing in is only caused by the weight which is loaded on the drive. The declutching is achieved by a special bearing which ensures the power transmission between worm and motor shaft.

HANNING’s engineering department offers the development and implementation of individual solutions. Together with the customer we define the drive requirements regarding power, traversing speed and accuracy of position and adapt the drive accordingly.

Universal and compact

The new SL 80 is very powerful and covers up to 8,000 N. Many new applications are possible. Its newly developed housing with integrated endshield ensures a very compact design. The SL 80 is now also suitable for smaller mounting spaces. The very rugged motors enable almost a load-constant speed up to 15 mm/s.

As option, the SL 80 is also available with a declutch system. The power transmission can be interrupted in one direction so that the traversing in is only caused by the weight which is loaded on the drive. The declutching is achieved by interrupting the power transmission between screw nut and travel tube.
 
HANNING’s engineering department offers the development and implementation of individual solutions. Together with the customer we define the drive requirements regarding power, traversing speed and accuracy of position and adapt the drive accordingly.

 

Small and individual

The KL 95 is the smallest linear actuator of this series. It is however as rugged as all the other drives. It is suitable for applications up to 4,000 N and traversing speeds of 18 mm/s.

As option, the KL 95 is also available with a declutch system. The power transmission can be interrupted in one direction so that the traversing in is only caused by the weight which is loaded on the drive.

The declutching is achieved by interrupting the power transmission between screw nut and travel tube.

HANNING’s engineering department offers the development and implementation of individual solutions.

Together with the customer we define the drive requirements regarding power, traversing speed and accuracy of position and adapt the drive accordingly.
 

The linear actuators of the S 95 and SH 95 series have a compact design. They are available as single-phase devices with 230 V and as three-phase variant with 400 V.

Powerful single-phase and three-phase AC motors with a winding diameter of 95 mm provide large traversing forces and virtually constant traversing speeds even under load changes. In thermally harsh environments bronze gearboxes can be used.

Of course, we perfectly adapt the power, design and traversing speed of the S 95 and SH 95 actuators to your individual application.

The linear actuators of these series are also available as low-voltage three-phase AC system with frequency inverter (DC-FI system). Please ask for our DC-FI brochure.

The compact linear actuators of the S 80 and SH 80 series are available as single-phase devices with 230 V.

Powerful AC motors with a winding diameter of 80 mm provide large traversing forces. High efficiency can be achieved by choosing a preferred direction for the drive.

It is however possible to perfectly adapt the windings, spindles and preferred direction of S 80 and SH 80 linear actuators to your individual application. 

The linear actuators of these series are also available as low-voltage three-phase AC system with frequency inverter (DC-FI system). Please ask for our DC-FI brochure.

The linear actuators of the S 71 and SH 71 series are available as single-phase devices with 230 V.

A winding diameter of 71 mm provides the compactness required for many applications.
It is however possible to perfectly adapt the spindles and winding characteristics of S 71 and SH 71 actuators to your individual application.

The linear actuators of these series are also available as low-voltage three-phase AC system with frequency inverter (DC-FI system). Please ask for our DC-FI brochure.

 

The S 56 and SH 56 linear actuators are available as single-phase devices with 230 V. With a winding diameter of 56 mm they are the smallest of our linear actuators. Due to their compact design they can be used for many different applications.

It is however possible to perfectly adapt the windings, spindles and preferred direction of S 56 and SH 56 linear actuators to your individual application.

The linear actuators of these series are also available as low-voltage three-phase AC system with frequency inverter (DC-FI system). Please ask for our DC-FI brochure.

The SI 95 series linear actuators with screw nuts and the SHI 95 series with encapsulated screw types have been designed for industrial applications. They are capable of forces up to 12,000 N and are designed for very small mounting spaces.

They are especially suitable for applications such as moving doors, ramps and conveyor belts.

Because of their extensive accessory programme and modular design, the SI 95 / SHI 95 series linear actuators are attractive and universally applicable drive components for industrial applications.

HANNING’s engineering department offers the development and implementation of individual solutions. Together with the user, we define the drive requirements regarding power, speed, accuracy of positioning and also other technical details such as windings which reduce the noise generation. This engineering competence enables HANNING to develop individual types.

The DC-FI is a low-voltage frequency inverter for controlling three-phase asynchronous motors. It can be used with any HANNING linear actuator and lifting columns with low-voltage three-phase winding.

The lifting column has been designed to steplessly lift and lower cantilevered and heavy loads. There are 2 and 3 piece column lifts available offering different lifting heights.

The powerful telescopic drive enables a lifting torque of up to 7,000 N and traversing speeds of up to 32 mm/s which remains virtually constant at rated load. The large cross-section of the column and the precise guidance ensure tip-resistant operation. Different control options provide the user with highest possible comfort. The lifting column has a very aesthetic design and does not need any additional covering.

Tracking systems adjust solar cells to the current position of the sun. Depending on the location, the tracking system can increase the efficiency of the cell by up to 40 % compared with stationary systems. Our system is suitable for solar modules up to 40 m² and two-axis programmable tracking.
HANNING tracking system consists of low-profile gearbox, tilting drive and control unit.

HANNING vibration motors are used in therapy tables and massage chairs as well as cosmetics chairs. They support therapeutic treatment with different vibration levels and types to relax the muscles.

HANNING vibration motors are also available as sets, comprising three motors, one vibration control and a pneumatic handheld switch. There are various designs to choose from.
 

Excellent sleeping comfort - For more than 30 years we have manufactured hamatic frames for adjustable electric beds. hamatic has been continuously improved so that we can guarantee best sleeping comfort.

hamatic is built with an extremely rugged aluminium frame and is available in sizes from 158 cm to 218 cm in length and 68 cm to 158 cm in width. The high-quality spring battens perfectly adjust to the body and give flexible support for all common mattress types.

The frame can be adjusted using either a de-energised pneumatic control unit or an infrared remote control with memory functions. Since safety and reliability have highest priority, slip clutches ensure that injuries are impossible.

HANNING's synchronous condensate pumps are characterized by high reliability and low operating noise. The high-efficiency motor is particularly economic in its use of electrical energy.

Economic & silent – The circulatory pumps of HANNING are designed for the use in household appliances as well as industrial applications. Due to characteristics, such as low consumption of resources and silent operation in connection with an optimum flow rate, the circulatory pumps meet the demands of modern household appliances and industrial applications.

A world of possibilities – Our synchronous drain pumps are developed for use in washing machines and dishwashers. We have many different variants of drain pumps as well as design and development expertise to insure that the performance meets the requirements of every application.

The single-phase synchronous motor which drives the drain pump has almost completely replaced the shaded pole motor which has dominated this sector for decades. This pump type is now simply referred to as a "synchronous pump".

Our HANNING synchronous drain pump is absolutely leak-proof. This is achieved by a new pump design. The dynamic sealing, used in shaded pole pumps could be eliminited. Another advantage is the better resistance to foreign objects. Due to the design, they can be cleaned away more easily because the pump can change the direction of rotation.

Everything is possible – Our drain pumps are especially developed for the use in washing machines and dishwashers. A multitude of variants as well as service and development efforts ensure that all wishes of individual applications are fulfilled.

Hot air - For industrial cookers, industrial baking ovens, drying stoves, warming and thawing appliances. The hot air blowers are equipped with a motor individually developed for them. The advantage is that the roller bearing nearest to the drive motor in the hot air chamber is cooled intensively due to a special hollow shaft and the integration of an intermediate radial fan. The bearing which is very sensitive to heat is by this means protected against damages and expensive special constructions are no longer necessary.

Two-fold or three-fold – Radial fans for air conditioning systems, central ventilation systems (channel system), large extractor hoods, air curtains and heat pumps for air/water systems. The fan wheels are made of zinc-coated steel plate and are vibration-free, due to static and dynamic balancing of wheels. They are driven by 3-phase or speed-variable single-phase induction motors in conventional design (internal running).

Hot application – The single-phase A. C. motors (0.4 – 2.5 kW) are especially designed for the use in industrial and private heating facilities.