| |
2
 |
 |
| C2 |
|
 |
Germany |
CALIRA | |
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
| Show Screen |
|
|
|
|
| Offer Profile |
|
|
We manufacture switch-, control- and
charge-systems for sailing yachts, power yachts and motor yachts.
We supply wholesaler and yacht manufactures with our high-grade standard
products. As a system-builder we are able to offer and manufacture standard,
custom and complete electrical systems including cable-production. |
|
|
|
|
|
|
|
|
| Product Abstract |
|
|
 |
 |
 |
| Automatic charger LG 612-DS/IU |
Art.-Nr.: H04 242 0612 00
Automatic charger in conventional technology for gel- or lead-acid batteries
with new developed power electronics. Current- and time-controlled IUoU charging
characteristic Flown off current will be recharged immediately. Line voltage
swings get compensated. Second charging output for e.g. a starting battery. D+
Input, to activate on the integrated battery separator relay. Operation
indication by LEDīs. Connector for a remote monitoring Panel for example the LK-Panel
II.
Technical specifications:
AC input voltage range: 215V-245V; 50Hz
Charge current: 12AAV
Charge voltage bulk: 14,4V, Ripple ~ 3%
Charge voltage float: 13,8V, Ripple ~ 3%
Timer absorption stage: 6h
Battery capacitance: 60Ah – 120Ah
Housing: Aluminium, black/blue coated
Dimensions: D 240 x W 190 x H 115mm
Weight: 4,5kg
Equipment:
Protection against reverse polarity and overload
Integrated battery separator relay
Input B+ (6,3mm Faston)
Input D+ (6,3mm Faston)
Charge current terminals, 6,3mm Faston
230V flex with three-pin plug
Operation indication by LEDīs
Output for a remote monitoring panel
Standard accessory:
Clamping bolts, cable shoes
Fuse holder with fuse 30A
Instruction manual |
|
| Automatic charger LG 616-DS/IU |
Art.-Nr.: H04 242 0616 00
Automatic charger in most modern microprocessor controlled switch-mode
technology for Gel- or lead acid batteries. Current- and time-controlled IUoU-charging
characteristic. Flown off current will be recharged immediately. Line voltage
swings get compensated. Second charging output for e.g. a starting battery.
Automatically D+ recognition to activate the integrated battery separator relay.
Charging current decreases if the automatic charger becomes to hot. Connectors
for an external battery temperature sensor and a remote monitoring panel for
example the LK-Panel II.
Technical specifications:
AC input voltage range: 180V-250V; 50-60Hz
Charge current: max. 16A
Charge voltage bulk: 14,4V (optionally temp. controlled)
Charge voltage float: 13,8V (optionally temp. controlled)
Timer absorption stage: 10h at Gel, 4h at lead acid
Battery capacitance: 60Ah – 160Ah
Dimensions: D 205 x W 215 x H 85mm
Weight: 1,3kg
Equipment:
Protection against reverse polarity and over load
Integrated battery separator relay
Input B+ (Cage-clamp terminal)
Automatically D+ recognition
Charge current terminals, cage-clamp max. 6mmē
Plug for 230V AC input
Output for external remote monitoring panel
Terminal for battery temperature sensor
Standard accessory:
230V flex, 1m
Clamping bolts, cable shoes
Fuse holder with fuse 30A
Instruction manual |
|
| Automatic charger LG 630-DS/IU |
Art.-Nr.: H04 242 0630 00
Automatic charger in most modern microprocessor controlled switch-mode
technology for Gel- or lead acid batteries. Current- and time-controlled IUoU-charging
characteristic. Flown off current will be recharged immediately. Line voltage
swings get compensated. Second charging output for e.g. a starting battery.
Automatically D+ recognition to turn on the integrated battery separator relay.
Charging current decreases if the automatic charger becomes to hot. Connectors
for an external battery temperature sensor
and a remote monitoring panel for example the LK-Panel V. It shows the different
stages of the charging process.
Technical specifications:
AC input voltage range: 195V-250V; 50-60Hz
Charge current: 30A
Charge voltage bulk: 14,4V (optionally temp. controlled)
Charge voltage float: 13,8V (optionally temp. controlled)
Timer absorption stage: 10h at Gel, 4h at lead acid
Battery capacitance: 100Ah – 300Ah
Dimensions: D 302 x W 210 x H 100mm
Weight: 3 kg
Equipment:
Protection against reverse polarity and over load
Integrated battery separator relay
Input B+ (Cage-clamp terminal)
Input D+ (Cage-clamp terminal), respectively automatically D+ recognition
Charge current terminals, cage-clamp max. 16mmē
Plug for 230V AC input
Output for external remote monitoring panel
Terminal for battery temperature sensor
Standard accessory:
230V flex, 1m
Clamping bolts, cable shoes
Fuse holder with fuse 40A
Instruction manual |
|
 |
 |
 |
| Automatic charger LG 660-DS/IU |
Art.-Nr.: H04 242 0660 00
Automatic charger in most modern microprocessor controlled switch-mode
technology for Gel- or lead acid batteries. Current- and time-controlled IUoU-charging
characteristic. Flown off current will be recharged immediately. Line voltage
swings get compensated. Second charging output for e.g. a starting battery.
Automatically D+ recognition to turn on the integrated battery separator relay.
Charging current decreases if the automatic charger becomes to hot. Connectors
for an external battery temperature sensor
and a remote monitoring panel for example the LK-Panel V. It shows the different
stages of the charging process.
Technical specifications:
AC input voltage range: 195V-250V; 50-60Hz
Charge current: 60A
Charge voltage bulk: 14,4V (optionally temp. controlled)
Charge voltage float: 13,8V (optionally temp. controlled)
Timer absorption stage: 10h at Gel, 4h at lead acid
Battery capacitance: 200Ah - 600Ah
Dimensions: D 350 x W 290 x H 100mm
Weight: 5,5kg
Equipment:
Protection against reverse polarity and over load
Integrated battery separator relay
Input B+ (6,3mm Faston)
Input D+ (6,3mm Faston), respectively automatically D+ recognition
Charge current, terminals, max. 25mmē
Plug for 230V AC input
Output for external remote monitoring panel
Terminal for battery temperature sensor
Standard accessory:
230V flex, 1m
Clamping bolts, cable shoes
Fuse holder with fuse 80A
Instruction manual |
|
| Panel 110 –Shore power connection |
Art.-Nr.: H08 220 0110 00
Switch/control panel for the protection of the boat when it is connected to the
230 Volt AC mains network in harbour or in winter storage. The two-pin circuit
breaker with integrated earth leakage circuit breaker protects from overload,
short-circuit and electrical incidents. The disconnection of the mains takes
place at a leakage current of 30mA, or in the case of overload at 16 Amps. With
mains indicator lamp.
Technical specifications:
Front plate: Aluminium, anodised black
Dimensions: W 131 x H 141 x D 75mm
Weight: 600g (60N)
Circuit breaker: Circuit breaker with integrated earth leakage circuit breaker
16 A/30mA
Equipment:
Circuit breaker with integrated earth leakage circuit breaker 16 A/30mA
Mains indicator lamp
Terminal for protective earth with tension relief
Standard accessory:
Fastening screws
Operating instructions |
|
| Electrical Panel 308 |
Art.-Nr.: H08 012 0308 00
Switch/control panel with eight 12 volt consumer circuits. Every circuit
switchable, equipped with a thermal circuit breaker and indicator LED.
Technical specifications:
Front plate: Aluminium, anodised black
Dimensions: W 108 x H 145 x D 45mm
Weight: 220g (22N)
Equipment:
8 circuits with switch, LED and circuit breaker
1 = 10A
2 = 7A
3 = 4A
4 = 7A
5 = 2A
6 = 4A
7 = 7A
8 = 10A
Standard accessory:
Flat sleeves
Fastening screws
Operating instructions
|
|
 |
 |
 |
| Panel 327 |
Art.-Nr.: H08 012 0327 00
Switch/control panel with sixteen 12 volt consumer circuits. Every circuit
switchable, equipped with a thermal circuit breaker and indicator LED. Circuit 9
= bilge pump, switch position a = automatically bilge pump activation by
float-actuated level switch, switch position m = manually bilge pump activation.
Voltage measurement of two 12 Volt-batteries, e.g. start and supply batteries,
as well as the levels in two water tanks e.g. freshwater- and wastewater-tank.
The level can be indicated in 1/4 steps.
Technical specifications:
Front plate: Aluminium, anodised black
Dimensions: W 240 x H 145 x D 70mm
Weight: 450g (45N)
Equipment:
Combi-instrument for voltage and level
Selection switch test battery I – battery II
Selection switch test tank I – tank II
16 circuits with switch, LED and circuit breaker
1 = 3A
2 = 3A
3 = 7A
4 = 7A
5 = 10A
6 = 10A
7 = 3A
8 = 3A
9 = 10A
10 = 10A
11 = 10A
12 = 3A
13 = 7A
14 = 4A
15 = 12A
16 = 7A
Standard accessory:
10 Water tank probes
Measurement cable set for battery I/II, 5m long
Measurement cable set for tank I/II, 5m long
Flat sleeves
Fastening screws
Operating instructions |
|
| Panel 339 |
Art.-Nr.: H08 012 0339 00
Multi-functional control panel for indicating the voltage of two 12
Volt-batteries, e.g. start and supply batteries, as well as the levels in two
water tanks and two fuel tanks. The level can be indicated continuously or in
1/4 steps for the water tank for fresh water, depending upon the level probe
used, for the waste water tank only in 1/4 steps and for the fuel tanks only
continuously. The appropriate query is made using buttons according to the
symbol marking.
Technical Data:
Front panel: Aluminium, matt black anodised
Dimensions: W 108 x H 145 x D 40mm
Weight: 130g
Equipment:
Combination instrument with dual scale, illuminated
Selection button, Test battery I - II
Selection button, Test water tank I - II
Selection button, Test fuel tank I - II
Plug selectable contact bridges on the board for fresh water tank indication
continuously or in steps
Plug-in connections on the board
Standard accessory:
Measurement cable set for battery I/II, 5m long
Fastening screws
Operating instructions |
|
| Panel 421 –Shore power connection- |
Art.-Nr.: H08 330 0421 00
Switch/control panel for the protection of the boat when it is connected to the
230 Volt AC mains network in harbour or in winter storage. The two-pin circuit
breaker with integrated earth leakage circuit breaker protects from overload,
short-circuit and electrical incidents. The disconnection of the mains takes
place at a leakage current of 30mA, or in the case of overload at 16 Amps. With
illuminated switch and separate output for a 230 V boiler, 230 V socket with
cap, mains indicator lamp.
Technical specifications:
Front plate: Aluminium, anodised titanium grey
Dimensions: W 118 x H 250.5 x D 110mm
Weight: 600g (60N)
Circuit breaker: Circuit breaker with integrated earth leakage circuit breaker
16 A/30mA
Design according to: VDE 0100 – 530
Equipment:
Circuit breaker with integrated earth leakage circuit breaker 16 A/30mA
Mains indicator lamp
Illuminated 230V boiler switch
230V socket with cap
Terminal block with 2,5mmē cage tension spring clamps
Standard accessory:
Fastening screws
Operating instructions |
|
 |
 |
 |
| LK-Panel II |
| Art.-Nr.: H10 012 0142 00 Useful accessory for CALIRA
Sealine automatic chargers with two battery outputs. The charge of the service
battery and the parallel connection with the starting battery are indicated by
LEDīs. Applicable in combination with the following types of automatic chargers:
LG 612-, LG 616- and LG 727-DS/IU. They have a 4pole remote monitoring connector
for the enclosed control cable.
Technical specifications:
Front-panel: Aluminium, black anodized
Dimensions: W 54 x H 45 x D 25mm
Weight: 15g
Standard accessory:
Control cable, 5m length
Clamping bolts
Instruction manual |
|
| LK-Panel V |
Art.-Nr.: H10 012 0143 00
Useful accessory for CALIRA automatic chargers with one and CALIRA Sealine
automatic chargers with two battery outputs. The stages of charging (HL -NL -
EL) are indicated by LEDīs. An additional led shows the parallel connection of
starting and service battery when an automatic charger with two battery outputs
is used. Faults in the charging cycle are indicated by a red led. Applicable in
combination with the following types of automatic chargers: LG 420- /430- /620-
/630- /660- /415/24- /630/24-DS/IU.
They all have a 7pole remote monitoring connector for the enclosed control
cable.
Technical specifications:
Front-panel: Aluminium, black anodized
Dimensions: W 100 x H 80 x D20mm
Weight: 35g
Standard accessory:
Control cable, 5m length
Clamping bolts
Instruction manual |
|
| Stromat SV 1 |
Art.-Nr.: H10 012 0051 00
Is used for the common charge of three independent batteries, where every
battery can have her own charge current source. The Stromat SV 1 is monitoring
the voltage of the connected batteries. As soon as one of the batteries reaches
a voltage of 13,8 volts are all the three batteries switched parallel. All
batteries are charged by this. If the battery voltage falls below 13 volts, then
the parallel connection is automatically disconnected.
Technical specifications:
Input voltage: 10 – 15 volts DC
Current: 50Acont.
Housing: Plastic, black
Dimensions: W 88 x L 98 x H44mm
Weight: 180g
Equipment:
Screw terminals 10mmē
6,3mm Faston-terminal
Standard accessory:
Flat sleeve 6,3 mm
Instruction manual |
|
|
|
|
|
|
|
|
|
|
|
|
| |
3
|
|
C 
