|
Chairs
A decision that is easy to take
Mey CHAIR SYSTEMS GmbH has put together a highly versatile range of work
chairs that will satisfy every wish with respect to functions and quality,
since requirements vary, and there is no accounting for tastes. However, it
is not only a question of a subjective assessment of taste, but also of
ergonomics, of sitting comfortably, of preventing back problems, of the
durability of materials and workmanship, and so on. In a word: if you choose
the right work chair, you will do yourself and your colleagues a favour in
the long run. At any rate, this has nothing to do with taking difficult
decisions!
|
|
|
|
WORKER W15 series
- seat and back:
polyurethane foam (PU) black
- back height- and angle-adjustable
– 4° to – 28°
- seat height- and angle-adjustable
+ 8° to – 8°
- height adjustment by gas spring
- stable steel base made of round tube
black RAL 9005
|
 |
WORKER W13 series
- seat and back:
polyurethane foam (PU) black
- seat with synchro-mechanism 1 : 2.5
- back height-adjustable with ratchet mechanism
- back angle-adjustable with
permanent contact
- height adjustment by gas-spring
- attractive stable steel base made
of
round tube black RAL 9005
|
|
WORKER W9 series
- seat and back of polyurethane foam
- dimensions:
seat: width 440 x depth 420
back: width 400 x height 320
- back vertically moveable and angle adjustable
- height adjustment by gas spring
- stable base of round steel tube
with castors or gliders
|
|
|
|
WORKER WF series
- seat and back polyurethan foam (PU), optionally upholstered in
fabric (ST)/imitation leather (KL)
- back vertically movable,
height and angle adjustable
- back angle + 4°/-18°
- seat angle + 4°/- 8°, seat swivels
- height adjustment by gas spring
- shapely, aluminium base polished
|
|
WORKER FUTURA WF5 series:
- seat and back
polyurethane foam (PU) black
- back vertically movable,
height and angle adjustable
- back angle + 4°/-18°
- seat angle + 4°/- 8°,
seat swivels
- height adjustment by gas spring
- fibreglass reinforced plastic base,
black RAL 9005
|
|
WORKER W1 series
- seat and back optionally available in polyurethane
foam (PU) black, natural beech wood ( B)
lacquered or fabric (ST)/imitation leather (KL)
upholstered
- back vertically movable,
height- and angle adjustable
- back angle + 4°/-18°
- seat angle + 4°/- 8°,
seat swivels
- height adjustment by gas spring
- base of rectangular steel tube
40 x 20 x 2 mm, powder-coated,
black RAL 9005
|
|
|
|
PROWORK PW1 series
- seat and back
polyurethane foam (PU) black
- back vertically movable,
height and angle adjustable
- back angle + 4°/-18°
- seat angle + 4°/- 8°,
seat swivels
- height adjustment by gas spring
- base fibreglass reinforced plastic base
black RAL 9005
|
|
WORKER W5 series
- seat and back polyurethane foam (PU) black
- back vertically movable,
height and angle adjustable
- back angle + 4°/-18°
seat angle + 4°/- 8°,
seat swivels
- height adjustment by gas spring
- fibreglass reinforced plastic base
black RAL 9005
|
|
WORKER ECONOMY WE series
- seat and back optionally available in polyurethane
foam (PU) black, natural beech wood ( B)
lacquered or fabric (ST)/imitation leather (KL)
upholstered
- back vertically movable, adjustable in height and depth, seat swivels
- height adjustment by gas spring
- base rectangular steel tube
40 x 20 x 2 mm
|
|
|
|
WORKER W8 series
- seat and back polyurethane foam (PU) black
- back vertically movable,
adjustable in height and depth
- seat swivels
- height adjustment by gas spring
- fibreglass reinforced plastic base,
black RAL 9005
|
|
WORKER W2 series
- seat and back optionally available in
fabric (ST) anthracite/imitation leather(KL) black upholstered
- back vertically movable,
height and angle adjustable
- back angle + 4°/-18°
seat angle + 4°/- 8°,
seat swivels
- height adjustment by key slot
- base rectangular steel tube
40 x 20 x 2 mm, powder-coated,
black RAL 9005
|
|
WORKER WS series
- seat and back optionally available in polyurethane foam (PU) black,
natural beech wood ( B) lacquered or fabric (ST)/imitation leather (KL)
upholstered
- back vertically movable, adjustment in
height and depth,
seat swivels
- height adjustment by key slot
- base rectangular steel tube
40 x 20 x 2 mm, powder-coated,
black RAL 9005
|
|
|
|
Sit-stands
Everybody who works „standing“ needs a comfortable
support which protects him against premature fatigue.
The ergonomical sit-stands from Mey CHAIR SYSTEMS relieve joints and muscles
and at the same time help preventing long-lasting back pains.
You can remain the “standing” posture while allowing your spinal column
relief.
|
|
|
|
ASSISTANT FUTURA AF0 – AF2 series
- seat polyurethane foam (PU) black
- height adjustment by gas spring
|
|
ASSISTENT FUTURA AF5 series
- seat optionally in polyurethane foam (PU) black, imitation leather
- not swivelling
- height adjustment by gas spring
|
|
ASSISTENT FUTURA AF6 series
- seat and back optionally available in polyurethane
foam (PU) black or fabric (ST)/imitation leather (KL)
upholstered
- seat can turn by 70°, with automatic return
- seat angle adjustment, infinitely variable
- seat height adjustment, infinitely variable
from 610-860 mm
- small castors for
easy transport
- frame made of stable round tube, black
RAL 9005 with gliders
|
|
|
|
ASSISTENT FUTURA AF-S(R) series
- seat and back optionally available in
polyurethane foam ( PU) black, imitation leather black/ fabric black
upolstered
- mechanical height adjustment by
hand wheel
- seat height adjustment range
530 – 900 mm
- optionally available with footrest AH
- colour of the stand optional:
black RAL 9005
- sit-stand can be folded to save space
|
|
ASSISTENT FUTURA AF4 series
- seat and back optionally available in
polyurethane foam (PU) black
fabric (ST)/imitation leather (KL) black
upholstered
- seat angle adjustment, seat swivels
- height adjustment by gas spring
- base: Fibreglass reinforced plastic base,
- black RAL 9005, or optionally
base of rectangular steel tube with
foot release (FG)
|
|
ASSISTENT FUTURA AF9 series
- seat and back of polyurethane foam
- seat angle adjustment
- height adjustment by gas spring 590 – 875 mm
- base of round steel tube
- with gliders
|
|
|
|
Stools
This certainly has something to do with jumping
quickly off a stool!
The original German phrase can be traced back to an agile horse-rider, who
can quickly jump out of the saddle to conduct his business – and just as
quickly, he is back on his horse and away. Stools by Mey CHAIR SYSTEMS GmbH
also contribute towards a certain form of nimbleness and agility in the
routine of everyday work. This functional piece of furniture is needed
everywhere, is in constant use, and also disappears again very quickly under
the table.
|
|
|
|
ASSISTENT A1 series
- seat optionally available in
natural beech wood (B), lacquered polyurethan foam and imitation leather
- dimensions: Ø 370 mm
- height adjustment by gas spring
ring release under the seat
- base of rectangular steel tube
40 x 20 x 2 mm, powder-coated,
black RAL 9005
|
|
ASSISTENT A1S series
- seat optionally available in
natural beech wood (B), lacquered
polyurethan foam and imitation leather
- dimensions: Ø 340 mm
polyurethane foam (PUA3) black
- dimensions: Ø 330 mm
polyurethane foam (A6) black
- dimensions: Ø 330 mm
fabric (ST)/
- imitation leather (KL) upholstered
dimensions: Ø 370 mm
- height adjustment by gas spring
|
|
STOOL ASSISTENT A2,
STOOL ASSISTENT A10 series
- A2
height adjustment by hand mechanism
base of rectangular steel tube
40 x 20 x 2 mm, powder-coated,
black RAL 9005
|
|
|
|
ASSISTENT A3 series
- swivelling seat
polyurethane foam (PU) black
- dimensions:
seat: depth 415 x width 477 mm
- height adjustment by gas spring
- optionally available with or without seat angle
adjustment
- fibreglass reinforced plastic base
|
|
|
|
|
|
|
|
Special Seats
|
|
|
|
Stainless Steel: WORKER WF-TG-PU-VA series
Is that not a bit exaggerated?
The use of stainless steel in the production of work chairs is by no means
exaggerated, but clever, hygienic, economical and so on. In rooms with high
humidity and in some production processes, the chairs are exposed to
extremely adverse conditions day in day out. This has no effect on stainless
steel. And in areas with particularly strict hygiene requirements (e.g. in
food processing or in the pharmaceutical sector) stainless steel work chairs
are sometimes cleaned several times a day with hot steam. This highly
resistant material is guaranteed to stand up to this treatment without
complaining.
- suitable for wet rooms
- seat and back
polyurethane foam (PU) black
- back vertically movable, height- and angle adjustment
back angle + 4°/-18°
seat angle + 4°/- 8°,
seat swivels
- height adjustment by gas spring
- base of rectangular stainless
- steel tube with gliders
|
|
E-conductive: WORKER WF-TR-ST-ESD Serie
The opposite of "high-voltage"
is by no means "boring"
A gripping detective story in the evening, an electrifying candle-light
dinner for two.
This is all very well – and there is a time for everything! But things are
different in factories. For example how to earth disruptive electrical
charges so that static electricity cannot interfere with work. You can use
specially designed chairs by Mey CHAIR SYSTEMS GmbH to remove this unwelcome
voltage, without the production in your factory becoming boring.
- ESD version
- seat and back
fabric (ST) upholstered
- back vertically movable, height and angle adjustable
back angle + 4°/-18°
seat angle + 4°/- 8°,
seat swivels
- height adjustment by gas spring
- stylish base of aluminum material
- with braked, hard-floor castors with
rubber coating
|
|
FOOTREST-EFS90
Hard-working staff regularly
put their feet up
This of course has nothing to do with an idle doze in the office or even
with feet on the desk. On the contrary! If you use the moving footrests by
Mey CHAIR SYSTEMS GmbH, you will increase your efficiency significantly, for
your circulation will keep going at operating temperature, and sitting
comfortably will encourage you to deal purposefully with the work in hand.
So you can safely assume that your staff will deliver results that will keep
you on your feet. By the way, height adjustment is effected by means of a
gas spring.
- angle adjustable footplate
made of plastic
- with knobs, non-slip
- height adjustable by gas spring
released by pressing a button
- range of height 110 - 320 mm
- angle-adjustable 0° to +30°
|
|
|
|
Floor mats made of polyurethane
Stay down to earth
"Just standing around at work the whole time" - you must be joking! Working
standing is particularly fatiguing – whether on a production line or behind
a counter. This is why you should allow your staff to relax - give them
long-term protection from back problems and tired legs. The best way is with
PU mats by Mey CHAIR SYSTEMS GmbH. They take the strain off the spinal
column and joints, stimulate the circulation and also give your staff a
secure footing, in the truest sense of the word. The mats are also robust
and durable.
- ergonomically designed mats made
of polyurethane with
knopped, closed surface, borders
chamfered on all sides
- robust and of low flammability
- stimulates the blood circulation
- minimizes back and leg trouble
- dimensions: 940 x 640 mm,
2 pieces per set
- optionally available in:
ESD – electroconductive
colour: on request
other colours:
light grey,
red,
green,
blue
|
|
|
|
|
A 
