• PROCESS INDUSTRY 21XX

Navigation : EXPO21XX > PROCESS INDUSTRY 21XX > H28: Controls > EBRO ARMATUREN
  • Offer Profile
  • Our broad range of products includes valves, actuators and automation technology.

    We are able to offer customized solutions for almost every industrial application. Due to our own production line of actuators and automation technology, the valves can always be equipped with the optimal fitting actuator. This is how an excellent matching of both components is guaranteed, which reduces the energy demand.
Product Portfolio
  • Resilient Seated Valves

  • Thanks to their design and material diversity, centrally mounted, resilient seated shut-off and control valves are almost universally usable. Whether the medium is water, powder or gas - with a broad range of materials, we can offer you the optimal solution for your application.
      • Z 011-A

      • Resilient Seated Valve

        A universally applicable wafer type valve manufactured acc. to EN 593.A wide range of standard materials offers the use in various applications.
      • Z 011-A THERM

      • Wafer Type valve with integrated thermometer

        A unique valve series with integrated thermometer for media temperature control.
      • Z 011-A GAS

      • For gas applications

        A resilient seated valve designed for gas applications.Certified by DVGW .
      • Z 011-A WATER

      • For potable water applications

        Resilient seated butterfly valve especially designed for water applications. Certified by DVGW.
      • Z 011-B

      • Vulcanised Liner

        A universally applicable butterfly valve with vulcanised liner according to EN 593. Available as wafer- and lug type version.
      • Z 011-AS

      • Light weighted aluminium version

        A light weighted wafer type valve to be used in public swimming pools.
      • Z 014-A

      • Resilient Seated Valves

        A lug type butterfly valve for end of line applications.
      • Z 014-A THERM

      • Lug Type Valve with integrated thermometer

        A unique valve series with integrated thermometer for media temperature control.
      • Z 014-A GAS

      • Resilient Seated Valves

        A lug type butterfly valve for end of line applications.
      • Z 014-A WATER

      • Resilient Seated Valves

        A lug type butterfly valve for end of line applications.
      • Z 014-B

      • Vulcanised Liner

        A universally applicable butterfly valve with vulcanised liner according to EN 593. Available as wafer- and lug type version.
      • Z 011-GMX

      • Special Lining for abrasive media

        The special liner of this wafer type valve is suitable for applications with abrasive media.
      • F 012-A

      • Resilient Seated Valves

        A double flanged valve with vulcanised liner suited for haevy duty services such as shipbuilding and wastewater plants.
      • F 012-A GAS

      • Resilient Seated Valves

        A double flanged valve suited for heavy duty services such as shipbuilding and wastewater plants.
      • F 012-K1

      • Resilient Seated Valves

        A double flanged valve in short construction designed for heavy duty services.
      • F 012-K1 GAS

      • Resilient Seated Valves

        A double flanged valve in short construction designed for haevy duty services.
      • Z 411-A

      • Resilient Seated Valves

        The reduced inner diameter of this wafer type valve is suited to be installed in PE/PP piping systems.
      • Z 414-A

      • Resilient Seated Valves

        The reduced inner diameter of this lug type valve is suited to be installed in PE/PP piping systems.
      • Z 611-A

      • Split body Design

        Wafer type valve with 2-piece body and disc and shaft in one piece.
      • Z 614-A

      • Split body Lug Type

        Lug type valve with splitted body and disc and shaft in one piece.
      • Z 611-C

      • Designed for the chemical industry

        Wafer type butterfly valve for shut-off and control services in the chemical industry.
      • Z 614-C

      • Resilient Seated Valves

        Lug type butterfly valve for shut-off and control services in the chemical industry.
      • Z 611-K

      • Resilient Seated Valves

        Valve with split stainless steel body for use in the food and beverage industry. Soft seated and PTFE lined versions are available.
      • Z 614-K

      • Valve with split body

        Valve with split stainless steel body for use in the food and beverage industry. Soft seated and PTFE lined versions are available.
      • M015-A

      • Centre flanged butterfly valve

        Butterfly valve with centre flange enables the one side lugging of the pipe. Due to the diversity of base materials available, this valve is suitable for various fields of application.
      • Z 014-WN

      • Full flanged valve

        The full flange design of this valve series provides spaceless sealing with the counterflanges, so objectionable scaling is avoided.
      • Z 414-A GAS

      • Light weighted aluminium version in EBRO works standard

        A light weighted wafer type valve is especially designed for water treatment plants in public swimming pools.
      • Z 612-A

      • Double flanged butterfly valve

        Resilient seated double flanged butterfly valve for semi-corrosive media with split body.
    • PTFE Valves

    • PTFE-lined shut-off and control valves are designed for use in chemically aggressive leaches and acids. The minimum 3 mm thick lining comprising virgin PTFE ensures optimal permeation protection. In conjunction with the double shaft seal, this series offers maximum operational safety, even with corrosive and toxic media.
        • T 211-A

        • PTFE Valve

          PTFE-lined wafer type valve for chemicals and high-corrosive media.
        • T 212-A

        • PTFE Valve

          Double flanged PTFE-lined butterfly valve for Shut-off and Control Services in the chemical industry.
        • T 214-A

        • PTFE Valve

          PTFE-lined lug type valve for chemicals and high-corrosive media.
        • T 211-C

        • PTFE Valve

          PTFE-lined wafer type valve for toxic and highly corrosive media.Specially designed for the chemical industries.
        • T 214-C

        • PTFE Valve

          PTFE-lined lug type valve for toxic and highly corrosive media.Specially designed for the chemical industries.
      • High Performance Valves

      • High operating pressures and extreme temperatures - wherever other valves reach their physical limits, this series is the ideal solution. The double eccentric design of the valve disc, high-quality materials and outstanding workmanship ensure safety even in extreme conditions of use. Different sealing systems enable an optimal solution for the respective field of application.
          • HP 111

          • High Performance Valves

            A high-performance wafer type valve suitable for high pressure and high temperature applications.
          • HP 114

          • High Performance Valves

            A high-performance lug type valve suitable for high pressure and high temperature applications.
          • HP 111-E

          • High Performance Valves

            High-performance wafer type valve with two piece shaft and ANSI 150 Pressure/Temperature rating.
          • HP 114-E

          • High Performance Valves

            High-performance lug type valve with 2-piece shaft and ANSI 150 Pressure/Temperature rating.
          • HP 114-C

          • High Performance Valves

            High Performance Valve for the chemical industry.
          • HP 112

          • High Performance Valves

            Double-flanged butterfly valve in double-eccentric construction. Reliable sealing even with extreme temperature and pressure conditions.
          • HP 114-K3

          • High Performance Valves

            Lug type butterfly valve in double-eccentric construction. Reliable sealing even with extreme temperature and pressure conditions.
        • Actuator Technology

        • Something not many people know: EBRO produces its own actuators - and has been doing so for 30 years. For EBRO customers this means that butterfly and gate valves can always be equipped with the most suitable actuator. No compromises, just the best possible match of components - this is what the EBRO actuator series stands for.
          Pneumatic actuators, single or double acting, have been proven for decades. However, industrial process air is expensive. Energy efficiency is therefore the topic of the day. As a manufacturer of valves and actuators, EBRO can specifically match single product components according to customer requirements and within the scope of operating conditions, thus substantially reducing regular operating costs.
            • EB-SYD

            • pneumatic actuator

              The scotch-yoke principle in the EB actuators exactly matches the valve torque characteristics,thus reducing size and air consumption.
            • EB-SYS

            • pneumatic actuator

              The scotch-yoke principle in the EB actuators exactly matches the valve torque characteristics,thus reducing size and air consumption.
            • SC

            • pneumatic linear actuator

              This series of linear pneumatic actuators is designed to automate knife gate valves. Available in 6 sizes and different stroke lenghts.
            • E50-E210

            • electric actuator

              A compact series of actuators for open/close and control functions.
            • MODULAR SYSTEM E65-E210

            • electric actuator

              Electric quarter turn actuators series E 65 - E 210 with modularsystem are designed to automate control valves.
          • Special Applications

          • Series production is our business - the development of customised solutions for special applications is our passion. For more than 40 years we have been developing tailor-made solutions in close collaboration with our customers, for challenging fields of application that simply require more than a standardised valve product. This has resulted in countless variations. Many of them have been developed to series production, others are manufactured in small batches for select applications. We can only show the tip of the iceberg here. Challenge us!
              • BE 50/BE 80

              • container valve

                A valve series especially designed to be used with silos and containers.
              • BE 250/BE 300

              • container valve

                A valve Series especially designed to be used with silos and containers.
              • TW 80/TW 100

              • wafer type butterfly valve

                These valves are designed to be used with tankers silos and road vehicles.
              • TW 150/TW 200

              • wafer type butterfly valve

                These valves are designed to be used with tankers ,silos and road vehicles.
              • CK

              • Pipe system valve

                A butterfly valve designed with both ends suitable for clamping rings.
              • Q 011

              • Safety valve

                Q011 double seat valves are designed for isolation/control in high purity air applications.
              • K016

              • plastic valve

                A plastic valve with socket ends for low pressure applications in plastic pipes.
              • FS-M

              • impeller valve

                The impeller valve series FS is designed for a safe and consistent discharge of rapid flowing products in the bulk industry.
              • TW-M

              • butterfly valve

                The series TW-M provides a light metal body with a stainless steel insert ring instead of an elastomer seat. Due to its special design a jamming of the media e.g.granulates is avoided. The valve closes properly.
              • CK-M

              • pipe system valve

                The metallic sealing version (CK-M) has an airspace between disc and body. This series is highly suited to control airflows and aspiration services.
              • CYCLE LOCK

              • EBRO cycle-locks are installed where powdered media is discharged from silos, receiver tanks and bigbags and dosed in many cases. They are also used for feeding into downstream production processes, as well as for inertisation of products during transfer operations.
              • Inflas

              • Low wear through inflatable liner

                The sealing system was developed for use with highly abrasive or very sensitive media.Available for all resilient seated butterfly valves with replaceable liner.
              • ViDos

              • Vibrating Disc keeps products in motion

                A wafer type process valve with a vibrator mounted on the lower shaft. The disc is set into linear vibrations before opening to keep the product in motion thus reducing compression. The frequency is controlled via air pressure.
            • Knife Gate Valves

            • Heavily contaminated and fibrous substances, such as those associated with wastewater systems, biogas plants or paper production, are the fields of application for knife gate valves. In situations where shut-off valves reach their mechanical and physical limits, high-quality gate valves are used. These robust valves are manufactured by our sister company Stafsjö in Sweden.
                • WB 11

                • Wafe Type Knife Gate valve for water applications.

                  The knife gate valve type WB is designed, manufactured, inspected and tested according European Pressure Equipment Directive (PED 97/23/EC), category II module A1 and therefore CE marked.
                • WB 12

                • knife gate valves

                  These valves are all bi-directional and can therefore be installed into pipe systems independent of pressure direction. Full bore and excellent flow characteristics makes them suitable for fluids, sludge and liquids with solids in suspensions such as water, sewage and bio mass.
                • WB 14

                • Lug Type Knife Gate Valve for water applications.

                  These valves are all bi-directional and can therefore be installed into pipe systems independent of pressure direction. Full bore and excellent flow characteristics makes them suitable for fluids, sludge and liquids with solids in suspensions such as water, sewage and bio mass.
                • WB 14E

                • Stainless Steel Lug Type Knife Gate Valve.

                  Stafsjö’s WB14E knife gate valve is a high performance shut-off valve with superior flow characteristics, offering bi-directional zero leakage shut-off up to 150 psi/10 bar. It is suitable for media such as pulp stock, chemicals, sludge, bio mass, slurry and water. The fully lugged body design is suitable for dead-end services.
                • MV

                • Universally applicable Knife Gate Valve.

                  Stafsjö’s knife gate valve MV is used within many different fields of applications. The valve has a gate with a bevel edge that effectively cuts through different media. In closed position the gate is pushed onto the seat which gives a tight and reliable sealing. This special shut-off technique makes the MV valve suitable for both fluids and dry media such as pulp, sludge, biomass, powder and different kinds of waste.
                • XV

                • knife gate valves

                  Stafsjö’s knife gate valve XV gives a secure and tight shut-off, independent of pressure direction. The valve has good flow characteristics and can be used in applications with pulp, biomass and sludge, and the Polyurethane seated version further extend its field of applications to abrasive media.
                • HG

                • Knife Gate Valves for high pressure applications.

                  Stafsjö’s high pressure knife gate valves HP, HPT and HX are all strenthened to withstand high bi-directional pressures. They are equipped with through-going "O" port gates and this secure a really safe and reliable shut-off of static and highly concentrated media. This shut-off performance, along with its excellent flow characteristics, makes them suitable for really demanding operating conditions with media as pulp (pulp concentration < 18%), liqour and highly concentrated slurry.
                • HP

                • Knife Gate Valve for high pressure applications.

                  Stafsjö’s high pressure knife gate valves HP, HPT and HX are all strenthened to withstand high bi-directional pressures. They are equipped with through-going "O" port gates and this secure a really safe and reliable shut-off of static and highly concentrated media. This shut-off performance, along with its excellent flow characteristics, makes them suitable for really demanding operating conditions with media as pulp (pulp concentration < 18%), liqour and highly concentrated slurry.
                • HPT

                • Knife Gate Valves for high pressure applications.

                  Stafsjö’s high pressure knife gate valves HP, HPT and HX are all strenthened to withstand high bi-directional pressures. They are equipped with through-going "O" port gates and this secure a really safe and reliable shut-off of static and highly concentrated media. This shut-off performance, along with its excellent flow characteristics, makes them suitable for really demanding operating conditions with media as pulp (pulp concentration < 18%), liqour and highly concentrated slurry.
                • HX

                • Knife Gate Valves for high pressure applications.

                  Stafsjö’s high pressure knife gate valves HP, HPT and HX are all strenthened to withstand high bi-directional pressures. They are equipped with through-going "O" port gates and this secure a really safe and reliable shut-off of static and highly concentrated media. This shut-off performance, along with its excellent flow characteristics, makes them suitable for really demanding operating conditions with media as pulp (pulp concentration < 18%), liqour and highly concentrated slurry.
                • RKO

                • Knife Gate Valve for abrasive media.

                  Stafsjö’s knife gate valve RKO is reliable and particularly well suited for demanding reject and other abrasive media. The valve’s circular inlet and square outlet together with the gate, that has a rectangular shape and a bevel edge, counteracts clogging and blockages, which often is a problem in combination with junk traps, coarse reject and cleaners.
                • JT

                • Knife Gate Valves for high pressure applications.

                  Stafsjö’s high pressure knife gate valves HP, HPT and HX are all strenthened to withstand high bi-directional pressures. They are equipped with through-going "O" port gates and this secure a really safe and reliable shut-off of static and highly concentrated media. This shut-off performance, along with its excellent flow characteristics, makes them suitable for really demanding operating conditions with media as pulp (pulp concentration < 18%), liqour and highly concentrated slurry.
                • D2G

                • Knife Gate Valve with two plates.

                  Stafsjö’s knife gate valve D2G is a bi-directional tight valve with full bore. The valve is equipped with two hard chromed gates that works towards each other in the bore, which gives an extremely fast operation. This shut-off performance along with its flow characteristics makes it suitable for contaminated media or reject handling. The valve should be mounted only in a vertical pipe line.
                • SLV

                • Knife Gate Valve for abrasive slurry.

                  Stafsjö’s knife gate valves SLV and SLF are particularly suitable for abrasive and demanding slurry where operation reliability and low life cycle cost are emphasized. The SLV is a lugged version while the SLF is fully flanged and especially suitable on old non-centred pipes or low pressure applications.
                • SLF

                • Knife Gate Valve

                  Stafsjö’s knife gate valves SLV and SLF are particularly suitable for abrasive and demanding slurry where operation reliability and low life cycle cost are emphasized. The SLV is a lugged version while the SLF is fully flanged and especially suitable on old non-centred pipes or low pressure applications.
                • SLX

                • High pressure knife gate valve

                  Stafsjö’s knife gate valves SLH and SLX are designed for the most demanding high pressure applications with slurry and other abrasive media where operation reliability and low life cycle cost are emphasized. The SLH is designed for pressure up 20 bar/290 psi while the SLX is designed for 50 bar/720 psi.
                • TV

                • Knife Gate Valve

                  Stafsjö’s knife gate valve TV is used as an isolation valve for a transmitter or sensor on a tank for which a short face-to-face length is required.
              • Check valves

              • Check valves in intermediate flange design with one piece connecting element or as a double wing check valve - metal or elastic sealant. Minor pressure loss and low opening pressure. The installation takes place between flanges pursuant to DIN / ANSI in horizontal or vertical piping systems.
                  • RSK

                  • check valve

                    A universally applicable check valve for horizontal and vertical installation.
                  • DC

                  • check valve

                    A double check valve for industrial plants and civil engineering.
                • Control elements

                    • EBRO SBU IO-Link

                    • Smart Box Unit

                      IO-Link Smart Box Unit, compatible with all EBRO valves. End position monitoring and diagnosis via IO-Link or conventional.
                    • SBU Advanced

                    • Smart Valve Monitoring

                      Smart Valve Monitoring via Bluetooth interface. Continuous checking of the main functions of valve and actuator.
                    • SBU-Basic

                    • Switch Box Basic

                      The new switch box generation SBU (Switch Box Unit) is designed to be directly mounted on our pneumatic actuators (acc. to VDI/VDE 3845. EB4.1 - EB12.1). By means of the compact design error sources and the construction volume are reduced.
                    • EP 100

                    • Analog Positioner

                      The analog positioner EP 100 with input signal 4..20 mA serves to activate single or double acting pneumatic quarter turn actuators.The settings are carried out in a simple way via switches and potentiometers. In the version EP100-Option R it achieves the option travel indication.Position of the actuator is shown by an analog 4..20 mA signal.
                    • EP 200

                    • Digital Positioner

                      The positioner EP 200 is controlled by micro processor and is designed to operate and control single or double acting pneumaticactuators by means of an analog signal of 4-20 mA. It providesthe advanced functionality of latest positioners, e.g. Autostart for thedetermination of control parameters and easy operation on site.
                    • EP 501

                    • Digital Positioner

                      Compact positioner for assembly with rotary and linear actuators with digital display.
                  • Applications

                      • Water & Wastewater

                      • Whether during the transport or treatment of municipal or industrial wastewater, or during the production and treatment of drinking water - valves and actuator technology by EBRO are uncompromisingly made for these applications.

                        The range covers butterfly and check valves as well as knife gate valves for the use with very dirty fluids. All used materials - from the body over elastomers to the smallest screw - comply with the rules of the DVGW and are accordingly admitted.

                        Hence valves by EBRO make their contribution to the preservation of water quality from the abstraction to the delivery for the end user.
                      • Energy

                      • Quality and reliability are the most important facts when plant engineers have to choose the components for power stations.

                        Not matter if nuclear or fossil-fuelled, or when used in plants for renewable energy – shut-off and control valves by EBRO are first choice when quality and life cycle costing are the selection criteria.

                        Different type series ensure that there is always a fitting solution for every application. If it is boiler feed water, condensate, cooling water or coolants – EBRO offers a reliable valve to fully meet the demands.
                      • Bulk Solids

                      • Applications in the bulk solids sector make high demands to the components which are mounted in the plant. On the one hand for sensitive fluids like milk powder or tea leaves the gentle product handling is of paramount importance. On the other hand high abrasive fluids like quartz sand or porcelain slurry make the highest demands to the abrasion resistance of the used materials.

                        For almost all applications EBRO offers a broad range of valves and actuators which are laid up unconditionally for the particular application. Impeller valves and inflatable liners for sensitive products, abrasion-resistant materials like the special coating of polyurethane for abrasive fluids and vibrating valve discs for the prevention of adhesion - We offer the solution for your application.
                      • Food & Beverage

                      • When planning equipment for the food - and beverage industry, the gentle handling of the subsidized products is a top priority.

                        The selected components have to meet this requirement by being designed in a way that they do not destroy the product and may not introduce contaminants into the duct system.

                        EBRO valves and actuators are consistently designed according to these specifications and are safely applicable to processes with critical products.

                        Butterfly valves of the series "Inflas" are designed and equipped with a sealing system which is pressed to the disc after the closing operation. This way, the grinding or crushing of the feed-through products is effectively prevented.
                      • Chemical industry

                      • When engineers design plants for process technology in the chemical industry, the safety for humans and environment is of the highest interest.

                        This is why the companies in the chemical industry have created a common specification for valves in the critical applications. The PAS (Public available specification) 1085 specifies the delivery conditions for valves, regulating units and process control modules which are used in the chemical industry.

                        ERBO has developped a special valve series which fulfills the safety gurdelines and quality standards of this specifaction.
                      • Pulp & Paper

                      • No matter if it is steam, oil, chemicals or rejects, no matter if liquid or viscous, we are able to offer a valve solution for every application in the pulp and paper industry.

                        With a sophisticated program including Knife Gate-, Butterfly-, Ball- and Sector Valves equipped with tailored actuators and automation technology you will always find a solution to solve the tasks in your application.
                      • Transport & Haulage

                      • Whether on the road, on railways or on the high seas - every day million tons of different products are carried from A to B .

                        EBRO valves and actuators fulfill important functions in different means of transport since more than four decades.

                        Whether in the outlet of silo trucks, in the filter system of pools on cruise ships or in the ballast system of tankers- valves and actuators of Ebro are always first choice when quality and reliability are the selection criteria.