Rated power: 6.15 MW
Rotor diameter: 126 m
Hub heights:
100–117 m Onshore
85–95 m Offshore
Power control: Pitch (electrical)
Rotor speed: 7,7–12,1 1/min (+15%)

The REpower 6M represents the consistent further development of the 5M technology. The turbine’s yield has increased by up to 15% with unchanged exterior dimensions; the 6M is thus currently the offshore wind turbine with the most power and the highest yield in the REpower Systems AG product portfolio.

Designed with the special offshore requirements in mind, the 6M guarantees a long service life and high availability - and all this at low operating costs. The 6M thus achieves the highest possible yields at minimal costs.

The REpower 6M also sets new standards in terms of reliability and ease of maintenance. The availability has increased significantly in comparison to conventional systems due to the redundant design of many components. In addition, the outstanding accessibility of the components allows maintenance work to be carried out more quickly as well as in a more practical and beneficial manner. Permanent monitoring, reliable corrosion protection, numerous safety measures for man and machine as well as experience garnered from over 2,000 installed REpower wind turbines guarantee high investment security.

Rated power: 5 MW
Rotor diameter: 126,0 m
Hub heights:
100–120 m Onshore
90–100 m Offshore
Power control: Pitch (electrical)
Rotor speed: 7,7–12,1 1/min (+15%)

The REpower 5M is representative of the successful transfer of our internationally renowned technology in a new dimension. The many innovative solutions in specific design detail demonstrate again our technical leadership. With a rated power of 5 megawatt and a rotor diameter of 126 metres, the 5M is one of the largest and most powerful wind turbines in the world. The 5M sets new standards for the economic viability of wind farms, especially in offshore installations.

Wind farms with turbines of this size achieve outputs similar to conventional power plants. This in turn puts high demands on the control and regulation system because optimised integration into the power grid is essential. In the 5M, REpower has once again shown how compatibility with the electricity grid can be optimised. The 5M can be integrated without difficulty into the grid, just as any other power plant of its size.

Due to its modular structure and logistical flexibility, the 5M is suitable for onshore and offshore installation. The offshore version is specifically designed to withstand the conditions of the high seas. This includes for example redundancy of key components to guarantee maximum availability, effective protection against corrosion and permanent monitoring.

Rated power: 3.2 MW
Rotor diameter: 114.0 m
Hub heights: 93 m / 123 m
Power control: Pitch (electrical)
Rotor speed: ca. 12,6 rpm (+16,0 %)

The 3.XM series of onshore wind turbines combines the design expertise and quality of the proven REpower wind power plant technology currently used within the 2–5 MW class and takes this to a new level. This development is based on well established REpower philosophies including superior service friendliness, conservative component design, ease of transportation and enhanced grid compatibility.

With a swept rotor area of 10,207 square metres and a hub height at 93 m and 123 m, the 3.2M114 has been specifically optimised for use in regions of low wind speeds.

The new generation of wind power plants provides the same quality, reliability and yield as previous REpower models. The excellent design in every detail ensures that the 3.XM series will provide excellent returns over the entire life of the machine.

Rated power: 3.4 MW
Rotor diameter: 104.0 m
Hub heights: 80 m / 100 m / 128 m
Power control: Pitch (electrical)
Rotor speed: 7.1 to 13.8 rpm (+16,0 %)

The 3.XM series of onshore wind turbines combines the design expertise and quality of the proven REpower wind power plant technology currently used within the 2–5 MW class and takes this to a new level. This development is based on well established REpower philosophies including superior service friendliness, conservative component design, ease of transportation and enhanced grid compatibility.

With a swept rotor area of 8,495 square metres and hub heights between 78 and 128 metres, the 3.4M104 has been specifically optimised for use in regions of medium to high wind speeds.

The new generation of wind power plants provides the same quality, reliability and yield as previous REpower models. The excellent design in every detail ensures that the 3.XM series will provide excellent returns over the entire life of the machine.

Rated power: 1.8 MW
Rotor diameter: 100 m
Hub heights: 78.0 - 80.0 m
Power control: Pitch (electrical)
Rotor speed: 7.8 to 13.9 rpm (+12.5 %)

The REpower MM100 is based on the well-established REpower MM series. As such, it incorporates all the experience and expertise that derive from our 1,700 operational REpower MM70, MM82 and MM92 wind turbines.

With its high Net Capacity Factor, the new variant has been optimized to achieve rated power even at low wind speeds. This enables the wind farm to secure a constant power supply, making efficient use of the available grid capacity. Due to our leading technology and innovative solutions, REpower´s wind turbines are capable of fulfilling most demanding grid requirements.

The REpower MM100 has a swept rotor area of 7.854 square meters and is available with a hub height of 78.0 – 80.0 m. It has been specifically optimized for use in North American regions with low wind speeds and operates with an outstanding low sound power level of max. 104.8 dB(A).

Rated power: 2.05 MW
Rotor diameter: 92.5 m
Hub heights: 68.5 / 78.5 / 80 / 100 m
Power control: Pitch (electrical)
Rotor speed: 7.8 - 15.0 1/min (+12.5%)

The MM92 has a swept rotor area of 6,720 square metres and is available with hub heights between 68.5 and 100 metres. It has been specifically optimised for use in regions of low to medium wind speeds.

The wind power plants of the MM series are based on the well-established technology driven concept of the 1.5-megawatt MD series with variable speed generator and converter system and electrical single-blade adjustment. The second generation of these high-performance power plants offer the same high reliability and maximum power output as previous models. Due to the leading technology and innovative solutions developed by REpower, the company's wind turbines can be fully integrated into the existing power grid.

Due to the excellent design in every detail, the MM series offers you excellent returns over the entire service life of the equipment.

Rated power: 2.05 MW
Rotor diameter: 82.0 m
Hub heights: 59 / 80 / 100 m
Power control: Pitch (electrical)
Rotor speed: 8.5 - 17.1 1/min (+16%)

The MM82 has a swept rotor area of 5,281 square metres and is available with hub heights between 59 and 100 metres. It has been specifically optimised for use in regions of high wind speeds.

The wind power plants of the MM series are based on the well-established technology driven concept of the 1.5-megawatt MD series with variable speed generator and converter system and electrical single-blade adjustment. The second generation of these high-performance power plants offer the same high reliability and maximum power output as previous models. Due to the leading technology and innovative solutions developed by REpower, the company's wind turbines can be fully integrated into the existing power grid.

Due to the excellent design in every detail, the MM series offers you excellent returns over its entire service life of the equipment.

Your decision for a REpower wind turbine is the choice of reliable, proven technology fulfilling highest quality standards. To preserve these advantages, the same high quality standards apply to our service.

Here you can switch to the menu item Service & Maintenance for further information.

In addition to our high-quality, state-of-the art wind turbines, we offer comprehensive expertise in planning and constructing turnkey wind farms. REpower is an experienced and reliable partner who assumes responsibility for the entire planning and installation of your wind farm, including all the necessary infrastructure and grid connection construction work. This includes, for example:

- Evaluating location potential and micrositing
- Planning and implementing grid connections
- Design and construction of electricity grid
- Technology such as cabling and transformer stations and substations
- Infrastructure and foundation construction
- Turbine construction and commissioning
- Maintenance, service, and management

Therewith you get a complete power plant from a single source that offers an optimal solution in terms of the technology used and cost-effectiveness: reliably, rapidly, and cost-effectively.

The energy yield and the economic feasibility of wind energy projects depend largely on the choice of the optimal turbine, but also on a precise evaluation of the location potential and the wind farm configuration. A turbine that appears ideally suited at first glance is not always the most cost-effective solution in the long term.

Our extensive micrositing expertise allows us to guarantee two things: the choice of the most cost-effective turbine and the optimal wind farm configuration. This is vital for a profitable long-term investment in wind energy.

Our aim is to ensure that our turbines are consistently available in the long term. All turbines are connected to our Permanent Monitoring System (PMS), which enables remote monitoring of all facilities from our service headquarters in Husum 24 hours a day, 365 days a year. Any faults are automatically reported without delay so that we can inform the operator immediately and solve the problem as soon as possible. In addition, our turbines are actively checked every six hours. What is more, essential operational data such as performance, electricity output, availability, status lists, temperatures, etc. are recorded permanently in a database, thus allowing comprehensive fault analysis.

Advantages of the Permanent Monitoring System include:

- Remote facility monitoring around the clock (24 hours a day)
- Active checking of the turbine every 6 hours
- Emergency service available 24 hours a day
- Immediate fault reporting
- Online fault repair
- Documentation of standard data, temperature, and output

We offer you all the required maintenance work for your wind turbine and additional services as needed with our standard maintenance agreement.

Your system is maintained by our experienced service technicians in accordance with specifications and repaired in close contact with you as quickly as possible in case of possible malfunctions. We perform the work for you up to a flat rate to be agreed upon on an individual basis. If additional measures are required at the WT, we will gladly provide you with an attractive offer.

Our Permanent Monitoring Service (PMS) may additionally beintegrated in this agreement in order to ensure optimum monitoring of your system. The selection of additional auxiliary services, e.g.: blade inspections, oil analyses, and the replacement of operating equipment, is possible.

The modular design of our standard maintenance agreement enables you to select different services that meet your individual needs.

It may be agreed upon that all repair orders require an approval by you in order to facilitate an overview of all costs for you.

We globally offer you a comprehensive service package with a focus on the operation of your wind farm or your wind turbine - combined with a technical availability that is in line with the market - with our full service concept (ISP – Integrated Service Package).

Our 24/7 Permanent Monitoring Service (PMS) ensures active and passive around-the-clock monitoring of your systems. An analysis may be performed online and corresponding measures may be initiated via the PMS in case of a malfunction.

Our full service concept includes the entire maintenance work in accordance with specifications, troubleshooting due to a component failure, from small parts to the replacement of major components, from the restart of the wind turbine via dial-up, to the usage of experienced malfunction technicians on site. Oil analyses at fixed intervals and the required replacement of operating materials in accordance with specifications are also included in the package. After the service has been performed, the reports and logs providing you with an optimum overview of the realized work and service activities are prepared.

We look forward to calculating you a project-specific price for this complete package.