NEMA23 57mm Electronic Motor Brake MAB23x
|
Electronic brake for all NEMA23 motors
The electronic brake is designed to be mounted on step- and servo motors, such as the MAC050, MAC095m, MAC140 or MAC141 series of integrated servo motors. Brake can also be used on MIS231,MIS232,MIS234 series of integrated stepper motors and MST23x stepper motors without build in controller.
A high quality electro-magnetic brake is mounted inside the housing. The brake has zero backlash and no auditory noise. Holding torque can be 0,5 to 1,5Nm.
It fits on all step- and servo motors with NEMA23 57x57mm flange and optional 6.35, 8, 10 and 11mm in and output shaft.The brake is used when it is desired to hold the motor shaft fixed at power off, or when the motor is used in a vertical linear application.When 24 VDC is connected, the brake will be deactivated and the motor can turn freely. It is recommended to use the brake only as a holding brake and not as an emergency brake. |
|
 |
 |
 |
 |
 |
|||||
 |
|||||
Notice that MAB23x-01/ MAB23x-02/ MAB23x-03 / MAB23x-31 / MAB23x-30 can work in oil (in and outside) because the brake are magnetic activated. Other brake models will not work in oil due to another concept.
| Holding Torque [Nm] (Oz-In) |
Input Shaft Ø [mm] (inch) |
Output Shaft Ø [mm] (inch) |
Connection | IP Current@24VDC [Amp] |
Weight ex. cable [kg] (lb.) |
Lenght [mm] (inch) |
Photo | |
| MAB23X-01* | 1.5 (212.417) |
6.35 (0.25) |
10 (0.393) |
M8 incl. 5m cable |
IP55/IP66* 0.45 Amp |
0.45 (0.99) |
Max 57 (2.244) |
 |
| MAB23X-03* | 1.5 (212.417) |
6.35 (0.25) |
6.35 (0.25) |
M8 incl. 5m cable |
IP55/IP66* 0.45 Amp |
0.43 (0.95) |
Max 57 (2.244) |
 |
| MAB23X-03IP65 | 1.5 (212.417) |
6.35 (0.25) |
6.35 (0.25) |
M8 ex. cable |
IP65 0.45 Amp |
0.43 (0.95) |
Max 57 (2.244) |
|
| MAB23X-04 | 1.5 (212.417) |
6.35 (0.25) |
11 (0.433) |
M8 incl. 5m cable |
IP55/IP66* 0.45 Amp |
0.45 (0.99) |
Max 57 (2.244) |
 |
| MAB23X-05 | 1.5 (212.417) |
10 (0.393) |
10 d-cut (0.393) |
M8 incl. 5m cable |
IP55/IP66* 0.45 Amp |
0.45 (0.99) |
Max 57 (2.244) |
 |
| MAB23X-05IP65 | 1.5 (212.417) |
10 (0.393) |
10 d-cut (0.393) |
M8 ex. cable | IP65 0.45 Amp |
0.45 (0.99) |
Max 57 (2.244) |
|
| *IP66 only +25pcs. order. |
||||||||
| MAB23X-30 | 1.5 (212.417) |
6.35 (0.25) |
6.35 (0.25) |
M8 ex. cable |
IP55 0.41 Amp |
0.44 (0.97) |
Max 54 (2.125) |
 |
| MAB23X-31 | 1.5 (212.417) |
6.35 (0.25) |
10 (0.393) |
M8 ex. cable |
IP55 0.41 Amp |
0.41 (0.90) |
Max 54 (2.125) |
 |
|
Cable for MAB23X-30 and MAB23X-31: WI1000-M8F4A05N. |
||||||||
| MAB23X-90 | 0.5 (70.805) |
6.35 (0.25) |
6.35 (0.25) |
Wire 500mm | IP44 0.25 Amp |
0.44 (0.97) |
Max 48 (1.889) |
 |
| MAB23X-91 | 0.5 (70.805) |
6.35 (0.25) |
8.0 (0.314) |
Wire 500mm | IP44 0.25 Amp |
0.44 (0.97) |
Max 48 (1.889) |
 |
| MAB23X-92 | 0.5 (70.805) |
8.0 (0.314) |
8.0 (0.314) |
Wire 500mm | IP44 0.25 Amp |
0.44 (0.97) |
Max 48 (1.889) |
|
| MAB23X-93 | 0.5 (70.805) |
10.0 (0.393) |
10.0 (0.393) |
Wire 500mm | IP44 0.25 Amp |
0.44 (0.97) |
Max 48 (1.889) |
|
For recommended torque for shaft collar screw please read this document
Shaft reinforcement for all NEMA23 motors
The shaft reinforcement is designed for use with step and servo motors such as the MAC050,MAC095,MAC140 and MAC141 series of integrated servo motors. It fits on all NEMA23 step- and servo motors with 6.35mm shaft. The Shaft Reinforcement contains a ball bearing with an outer diameter of 35mm and an output shaft of Ø14mm. This ensures that the shaft can withstand even high radial and axial loads.
The output shaft and flange are compatible with Yaskawa/Omron SGM and SGMAH 200/400W flanges and makes it possible to replace existing motors with a MAC motor.
The shaft reinforcement is designed for use with step and servo motors such as the MAC050,MAC095,MAC140 and MAC141 series of integrated servo motors. It fits on all NEMA23 step- and servo motors with 6.35mm shaft. The Shaft Reinforcement contains a ball bearing with an outer diameter of 35mm and an output shaft of Ø14mm. This ensures that the shaft can withstand even high radial and axial loads.
The output shaft and flange are compatible with Yaskawa/Omron SGM and SGMAH 200/400W flanges and makes it possible to replace existing motors with a MAC motor.
| MAS23X-01 | - | 6.35 (0.25) |
14 (0.551) |
- | IP55 | 0.31 (0.68) |
Max 32 (1.259) |
|
Cables
| Part number |
Description | Drawing | Photo |
| WI1000-M8F4S.3N | M8 Cable 4 pin Fem 0° Shielded 0.3 m open end cable with straight connector |
 |
 |
| WI1000-M8F4AxxN xx: 05 meter or 10 meter |
M8 Cable 4 pin Fem 90° 5-10 m open end cable with angled connector |
|
|
|
Below cables are only for MIS Stepper Motors |
|||
| WI1013-M12M17TF4T.4N | M12 17pM M8 4pF for MABxx brakes 0.45m cable with M8 for brake and M12 for motor for direct connection |
 |
 |
| WI1013-M12M17TF4TXAA | M12 17pM M8 4pF for MABxx brake +2m cable 0.45m cable with M8 for brake and M12 for motor for direct connection including 2 meter cable with I/O 1-3 and CVO. |
 |
 |
Pin 1 blue = 0 VDC, Pin 2 brown = +24 VDC, Pin 3 black = NC, Pin 4 white = NC.
|
DETAILED |
|
|
|
DOWNLOAD |
JVL A/S Bregnerødvej 127 DK-3460 Birkerød Denmark
Tel: +45 4582 4440 Fax: +45 4582 5550 E-mail: jvl@jvl.dk
Tel: +45 4582 4440 Fax: +45 4582 5550 E-mail: jvl@jvl.dk
