Submersible Level Transmitter
1 2 5 10 20mH2O;
Accuracy: +0.25%FS (typ.) +0.5%FS(max.);
4~20mADC;0~10/20mADC;0/1~5/10VDC
MPM285
Used For
Industrial Process Control, Gas & Liquid Pressure Measure, Pressure Checking Meter & Pressure Calibrator, Liquid Pressure System and Switch
Leave a MessageMPM285 oil-filled pressure sensor employs a silicon die known for its exceptional stability, a corrugated diaphragm made of stainless steel 316L, and a sturdy housing crafted from stainless steel 316L. The compact construction and size of the oil pressure transducer are suitable and applicable for limited installation space working site. It also can measure the medium compatible with stainless steel and FKM.
Feature
• Cost Effective, Small size
• Chip from international famous brand
• Laser Trimming for temperature compensation
• Pressure range: 0bar~1bar…35bar
• Gauge, Sealed gauge and Absolute
Electrical Performance
• Electrical connection: Φ0.5mm Kovar pin or 100mm silicon rubber flexible wires
• Common mode voltage output: 50% of input (typ.)
• Input impedance: 2.5kΩ~5kΩ
• Output impedance: 3.5kΩ~6kΩ
• Response (10%~90%): <1ms
• Insulation resistor: 100MΩ@100V DC
• Overpressure: 2 times FS
Construction Performance
• Diaphragm: Stainless steel 316L
• Housing: Stainless steel 316L
• Pin: Kovar
• O-ring: FKM
• Net weight: ~10g
Image:
MPM285 oil-filled pressure sensor employs a silicon die known for its exceptional stability, a corrugated diaphragm made of stainless steel 316L, and a sturdy housing crafted from stainless steel 316L. The compact construction and size of the oil pressure transducer are suitable and applicable for limited installation space working site. It also can measure the medium compatible with stainless steel and FKM.
Feature
• Cost Effective, Small size
• Chip from international famous brand
• Laser Trimming for temperature compensation
• Pressure range: 0bar~1bar…35bar
• Gauge, Sealed gauge and Absolute
Electrical Performance
• Electrical connection: Φ0.5mm Kovar pin or 100mm silicon rubber flexible wires
• Common mode voltage output: 50% of input (typ.)
• Input impedance: 2.5kΩ~5kΩ
• Output impedance: 3.5kΩ~6kΩ
• Response (10%~90%): <1ms
• Insulation resistor: 100MΩ@100V DC
• Overpressure: 2 times FS
Construction Performance
• Diaphragm: Stainless steel 316L
• Housing: Stainless steel 316L
• Pin: Kovar
• O-ring: FKM
• Net weight: ~10g
1 2 5 10 20mH2O;
Accuracy: +0.25%FS (typ.) +0.5%FS(max.);
4~20mADC;0~10/20mADC;0/1~5/10VDC
Oil is a high-quality energy and chemical raw material. That is, the "blood of industry". There are various challenges due to different environmental climates and storage conditions all over the world, as well as various unforeseen situations in the process of monitoring of oil tanks.
more info...During the process of oil and gas transportation, it is necessary to collect and analyze production and security data related to pipelines and production sites, and generally a supporting SCADA system needs to be built simultaneously. The SCADA system can monitor, control and manage the flow rate, pressure and temperature of the entire pipeline in real time, in order to achieve safe transportation, reduce consumption and improve economic efficiency.
more info...Ballast tank level monitoring achieves precise control of the ballast water system by using equipment such as electromagnetic flowmeters, level transmitters, and pressure transmitters to monitor data on inflow, tank liquid level, and pressure.
more info...The production of positive and negative electrode materials for lithium cell requires the transmission of powdered materials. The sealed pipelines realize pneumatic transmission of solid powder or particles. However, blockages can occur in the container when conveying materials with large particle sizes, high viscosity, or poor flow ability. Installed pressure transmitters solve this problem. An abnormal pressure alarm will be triggered to identify the location. This facilitates timely repair of the blockage, ensuring normal production and operation.
more info...