VAZ - Shredder for reusable material

Robust and sophisticated – the all-rounder among the single-shaft shredders

Robust, powerful and energy-efficient; our high-performance shredders of the VAZ series can be used universally and are the right answer for a wide range of applications. By adapting the rotor design, we aim maximum throughput with homogeneous output, even with challenging materials.

VAZ - Shredder for reusable material

The generalist –
Universally applicable for
a wide range of materials

Adaptable to your requirements. The great advantage of our VAZ series is the wide range of configuration options with which we can adapt the shredder to your very individual requirements: Rotor lengths from 800 to 2500 mm, throughputs from 200 to 25,000 kg and various pneumatic, hydraulic or screw-on screen designs offer many customisation options. In addition, our three proven drive systems - the HiTorc direct drive, the ESC belt drive and the mechanical gearbox - allow further adaption.

Webinar: Product relaunch of the VAZ

Duration: 40 minutes

For whom?
The generalist among the shredders can be used across all industries.

What?
Features and optimizations within the scope of the redesign
Facilitation of contaminant removal
Improved ergonomic operation
Digital networking for monitoring and reporting

To access the webinar, register here

The highlights of the large variants in the VAZ recyclables shredder series

The variants VAZ 1700, 1800, 2000, 2500 offer a lot more

VAZ flipper prevents your installation from damage

The machine can be equipped with the "Flipper" a pneumatically pre-tensioned counter knife that prevents damage by tramp material. This feature also makes it easy to remove tramp material without having to unload the hopper.

Smooth handling:
Hydraulic bottom flap

Consistent prevention of machine damage thanks to the automatic detection of extraneous materials. Practical and fast removal of extraneous materials via the hydraulic bottom flap. This also minimises downtimes

Your advantages at a glance

  • Highest reliability and availability
  • Energy savings of up to 50 %
  • Optimum ease of maintenance
  • Maximum homogeneous output with lowest fine dust content

 

  • Best possible value creation thanks to consistent, high-quality output
  • Counter knives adjustable from outside the machine
  • Supported by the Vecoplan Live Service

Features

The pneumatically swing-away screen unit can be quickly replaced thanks to the front flap, which is easy to open. Different screen perforations allow the output particle size to be optimally adjusted.

The bridge breaker swings downwards depending on the hydraulic material feed. This ensures a continuous material feed even with large and bulky materials (e.g. hollow parts, film bales, packaging materials, etc.).

The machine can be equipped with the "Flipper" a pneumatically pre-tensioned counter knife that prevents damage by tramp material. This feature also makes it easy to remove tramp material without having to unload the hopper.

The frequency-controlled ram achieves a high throughput even with challenging or very light input materials.

A first counter knife and an optional second one, segmented sections. Easily adjustable from outside the machine Optimised cutting performance thanks to the narrow cutting gap. Can be used in 4 ways – plus attractive operating costs – plus long service lives

The swing-away screen is robust and guarantees simple, fast and safe screen changes. The variable positioning of the screen segments enables a maximum wear part life cycle. Adaptation to the required output grain size is achieved by different sieve perforations.

Which model suits your needs?

Specification VAZ 800 VAZ 1100 VAZ 1300 VAZ 1600 VAZ 1700 L6 VAZ 1800 VAZ 2000 L6 VAZ 2400 VAZ 2500 L6
Type of drive Electromechanical drives Electromechanical drives Electromechanical drives Electromechanical drives Direct drive HiTorc Direct drive HiTorc Direct drive HiTorc Electromechanical drives Direct drive HiTorc
Motor power 22 kW 30 - 37 kW 37 - 75 kW 55 - 90 kW 111 - 247 kW 111 - 134 kW 111 - 247 kW 75 - 90 kW 134 - 203 kW
Speed range - 160 1/min 145 1/min 145 1/min 60 - 420 1/min 60 - 230 1/min 60 - 420 1/min 60 - 300 1/min 60 - 340 1/min
Rotor length 795 mm 1,070 mm 1,295 mm 1,555 mm 1,660 mm 1,812 mm 1,937 mm 2,400 mm 2,490 mm
Rotor diameter 370 mm 370 mm 370 mm 370 mm 640 mm 495 mm 640 mm 370 mm 640 mm
Weight 1.4 to 2.6 to 5.5 to 6.9 to 20 to 9.5 to 21,5 to 9.2 to 19.5 to
Rotor geometry Cutting crowns 40 x 40 mm
U rotor: 20 pcs or 40 pcs 		Cutting crowns 40 x 40 mm
U rotor: 27 pcs or 48 pcs 		Cutting crowns 40 x 40 mm
U rotor: 35 pcs or 60 pcs

Cutting crowns 60 x 60 mm
U rotor: 20 pcs 		Cutting crowns 40 x 40 mm
U rotor: 42 pcs, 72 pcs or 108 pcs

Cutting crowns 60 x 60 mm
U rotor: 24 pcs or 48 pcs 		- Cutting crowns 40 x 40 mm
U rotor: 84 or 126 pcs

Cutting crowns 60 x 60 mm
U rotor: 28 or 56 pcs 		Cutting crowns 40 x 40 mm
U rotor

Cutting crowns 60 x 60 mm
U rotor
W rotor
W rotor

Cutting crowns 80 x 80 mm
U rotor
W rotor

Cutting crowns 120 x 120 mm
W rotor 		Cutting crowns 40 x 40 mm
U rotor: 71 pcs oder 142 pcs 		Cutting crowns 40 x 40 mm
U rotor: 171 pcs

Cutting crowns 60 x 60 mm
U rotor: 76 pcs or 114 pcs
W rotor: 228 pcs
Rotor with deep pockets: 76 pcs

Cutting crowns 80 x 80 mm
U rotor: 60 pcs
Rotor with deep pockets: 60 pcs
Dimension (Length) 2,130 mm 2,550 mm 3,170 mm 4,295 mm 4.750 mm 4,493 mm 4,750 mm 3,150 mm 4,620 mm
Dimension (Width) 1,360 mm 1,900 mm 2,365 mm 2,625 mm 3.810 mm 3,425 mm 4,087 mm 4,230 mm 4,090 mm
Dimension (Height) 1,100 mm 1,110 mm 1,500 mm 1,500 mm 2.340 mm 2,800 mm 2,340 mm 1,500 mm 2,375 mm

Products

Discover more advantages

Can be used for following material

Wood
Biomass
Files and data
Paper and cellulose
Domestic and industrial waste
Alternative fuel
Plastics - post-consumer
Plastic - post-industrial
Plastic - Inhouse Recycling
All

Residual wood

Vecoplan equipment is specialized in processing this material into wood chips and then making it available as a raw material for the paper and board industry, for pellet production or as fuel for wood-burning systems.

Log

Roundwood which cannot be sawn or directly utilized is usually processed into chips and then used as fuel for wood-burning equipment, as raw material for the panel industry, pellet production or pulp production.

Waste wood

The processing of waste wood transforms wood waste of various types into a valuable secondary raw material. Besides the recovery of materials, efficient energy recovery is becoming increasingly important as a renewable energy source.

Bark

Bark can be thermally recycled as fuel and further processed into bark mulch or bark litter.

Wood and milling chips

Planing and milling chips are usually reground and then used as insulation material or, for example, in the production of pellets.

Pallets

Disposable pallets, wooden crates and cable drums that can no longer be used can be appropriately prepared for more processing into fuel for energy or wood briquettes.

Wood composites

Modern composite materials preferably used for furniture, benches, outdoor flooring and similar applications.

Straw

Grain straw is used in biogas plants. The material is also used in the form of straw pellets for alternative heat generation. Straw is the primary material used in the production of bioethanol.

Coconut shells

Briquettes made from coconut shells burn longer than wood and can be used in crop-growing countries to replace wood from life-sustaining forests. The material is also suitable for use as a fuel in biomass plants and boiler plants. The fibres in coconut shells have excellent insulating properties and are used to this end.

Grasses

Some grasses, such as miscanthus and switchgrass, are called biomass grasses because of the large amounts of biogas they can produce.

Residual forest wood

Residual forest wood is often the raw material for mulch, but it is also used as animal feed. In addition, it is used as fuel in biomass CHP plants (combined heat & power plants).

Straw bales

Direct feeding of entire strawballs to shredders for downstream processes in energy and materials recovery offers several advantages. The work of unravelling the strawballs in advance is no longer necessary. Systems for the storage, conveyance and metred feeding round off the product portfolio for processing technology.

Green waste

Green waste is used as co-substrates for soil improvement and is increasingly incinerated for energy in biogas plants. Coarser fractions of wood can also be made into mulch.

File folders, paper documents

Analogue data storage still plays an essential role even in this digital age, and this is why the data protection-compliant destruction of sensitive files and documents belongs in the hands of experts.

CDs, DVDs, floppy disks

Optical media such as CDs and DVDs have now replaced magnetic data carriers such as floppy disks. However, both variants are still subject to strict destruction regulations.

Magnetic tapes

Shredding magnetic tapes, when done correctly, is the best way to ensure that data is gone forever.

Waste paper

Wastepaper collected from households & commercial companies and even misprints from the printing industry are efficiently processed in paper industry plants to produce new paper, cardboard and paperboard.

Cardboard, paper tubes

The use of transport packaging will continue to play an essential role in the future, making it all the more important to keep the recycling rate as high as possible to conserve energy and resources.

Production waste

The requirements for handling production rejects range from destroying misprints at publishers to reducing the volume of waste temporarily stored in print shops and preparing it all for paper recycling.

Paper industry waste

Braids, spits, bears or fibre residues are the recyclable residues in paper recycling. The technical jargon under the collective term: pulper waste. As a leading specialist for shredding technology, we know what is important in this application. Pulper waste is diverse. The plastic it contains can be used thermally. The metal wires but also existing non-ferrous metal can be reused as recycling material.

Domestic waste

Residual waste is optimally handled by shredding it in mechanical-biological waste treatment plants (MBT) and separating the various recyclable materials from each other. Another use of residual waste is thermal utilisation in a waste incineration plant. The heat released is used both to generate electricity and to provide heat.

Lightweight packaging

Increasing the recycling rate of packaging with the aim of recycling more valuable materials than before is a key issue in the circular economy. In order to efficiently recycle the packaging collected in bags, this waste must be continuously and reliably sorted.

Bulky waste

Bulky waste chiefly includes discarded furniture, mattresses, wallpaper remnants and old carpets. Nowadays, most bulky waste can be recycled for materials and energy.

Industrial waste

Commercial municipal waste (also abbreviated to commercial waste) is municipal waste from sources other than private households, in particular commercial and industrial waste as well as waste from private and public institutions. This waste is similar to waste from private households due to its nature or composition and must be disposed of in the same way.

However, commercial municipal waste also includes other production-specific waste from other sources, such as workshop waste, cleaning rags containing mineral oil, paint buckets or non-infectious waste, leather waste, metal waste, including shavings from metalworking and metal processing.

Domestic waste

Typical residual waste from households offers little potential for material recycling. However, in the cement industry, the high-calorific fractions from the waste can be used as an alternative fuel. RDF manufacturers filter out these fractions by shredding and separating them.

Bulky waste

Largely homogeneous RDFs with good combustion and low pollutant properties can be produced, even from bulky waste.

Industrial waste

The non-recyclable materials from waste generated in industry and commerce can be processed into RDFs and used in power plants or the cement industry.

Waste paper industry

Both the cement industry and brick manufacturers increasingly rely on RDFs for their production. Waste from paper production can be used as an alternative fuel.

Used tyres

Rubber is a versatile material due to its properties. The best known and largest product in terms of volume is the tyre. In addition to thermal recycling as substitute fuel, for example in cement plants, used tyres can also be recycled, e.g. the granulate obtained can be used for a wide variety of floor coverings.

Rubber and rubber residues

Natural rubber is the basis of all rubber products and is a valuable natural raw material, so the aim here is to achieve the highest possible recycling rate through material recovery. However, the parts that cannot be further processed can still be used as an adequate fuel in cement production.

Sorting residues

In sorting plants for light packaging (LVP), the packaging items pass through various packaging items pass through various stations, at each of which a specific fraction of the material is sorted out of the material flow. Pressed into bales, the individual material fractions are then sent for recycling. Waste designation Sorting residues: Sorting residues from facilities for sorting lightweight packaging, so-called DSD sorting residues. These can be processed into alternative fuels in substitute fuel processing plants.

Waste wood, used wood

Wood waste or even old pallets can be used as a renewable raw material for energy production. Effective processing is essential to produce a waste-based RDF.

Biomass

Residual materials are chiefly used as solid biogenic fuels – in other words, biomass that is hardly suitable for purposes other than incineration. For example, these materials include forest and industrial residual wood, waste wood, garden and park waste and straw.

Textiles & Non-woven material

Textiles or woven materials made from natural materials such as wool, cotton or synthetic & blended fabrics are processed into fibres in unique processes. For impurities such as buttons, zippers, etc., reliable separation technology is used in the plant.

Hard plastic

In contrast to the processing of lightweight packaging, which is primarily well organised today, hard plastics were still often thermally recycled in the past. However, the recycling rate of these materials is now also increasing thanks to optimised treatment processes.

Film

Regranulates can be created as secondary raw materials from packaging, agricultural film, composite film, etc. The treatment process for this includes shredding technology, separation and sorting technology, washing and subsequent extrusion.

Packaging

As the demand for high-quality regranulates increases, closed-loop recycling is playing an increasingly important role in the material recovery of plastics, and this is why shredding is a critical process step since it is a preliminary stage for the subsequent sorting of recyclable materials.

Fibres, filaments & yarns

The particular challenge in the mechanical treatment of used cords and yarns is not only that they are made of highly tear-resistant, thin and partly viscoplastic material, but they are also tangled and contaminated by stones, wood debris and other impurities.

Hollow body containers

As the demand for the use of recyclates made from polyolefins – especially HDPE and PP – is constantly increasing, the collection and processing of these containers are also playing an increasingly important role. Here we must ensure that we adapt our machines and plants to the requirements of the materials.

Start-up lumps

The processing and recycling of waste from the plastics processing industry is economically attractive due to the savings in costs for new raw materials. Plastics processors can enable a consistent quality. This issue is significant when using engineering plastics with the highest mechanical properties since they are costly to produce.

Pre-Products

The recycling of plastics which are expensive to produce due to their technical properties and are often used to manufacture semi-finished products offers some potential savings for manufacturing companies. However, clean separation of the different plastics is a prerequisite. The pure regranulate obtained can then be used to produce sophisticated plastic components.

Film

Waste generated during production should, if possible, be returned directly to the internal production cycle without any losses or loss of quality. If such in-house recycling is not possible due to company-specific constellations, external recycling companies can also process film waste.

Fibres, filaments & yarns

For all their differences, the residual materials from the production of fibres, filaments and yarns share some particular mechanical properties: Toughness and high wear and tear resistance, combined with a high degree of elasticity. These present particular challenges for the shredding process.

Production waste

More and more plastics processing companies that manufacture a wide variety of plastic products are taking advantage of the opportunity to return production and process waste to the internal cycle. This saves raw material costs, plus the disposal costs for external recycling plants.

News

Blog

Success stories

Events

Contact persons worldwide

Your direct contact to us !

No matter whether your location is in Germany, the USA, Great Britain, Spain, Poland or somewhere else in the world: We always have the right contact person for you. At any time you can reach an expert from our company by phone or e-mail, who takes care of your concern competently.

contact us now