HC Compact servohydraulic testing machine
Testing Machine with Integrated Hydraulic Power Pack Download
Test load
- 10 kN - 100 kN
Type of test
- Fatigue
- Fracture mechanics
Standards
- ISO 12106
- ASTM E606
- DIN 50100
- ASTM E399
- ASTM E647
- ASTM E466
A complete testing system with hydraulic power pack
The HC Compact is a complete testing system with an extremely small space requirement. The low noise power pack forms the base support for the test frame, which reduces the machine’s footprint to a minimum.
The HC Compact testing machine is available in two sizes.
- The HC Compact 10/25 kN is designed for fatigue tests on smaller components, down to and including biomedical tests. The machine is equipped with a T-slotted platform and the testing actuator is therefore located in the upper crosshead.
- The HC Compact 50/100 kN is adapted for a full range of accessories for tests on composites, with which both static and dynamic testing can be performed. Due to the high stiffness of the load frame and easy connection of a high-temperature furnace, this machine is also optimally suited for LCF tests.
A temperature chamber can be installed on both models without a lot of effort.
Videos
Test area height | Standard | Extended by 250 mm1 | Extended by 500 mm | |
Dynamic nominal force | 25 | 25 | 25 | kN |
A - max. height of end of column | 2240 | 2490 | 2740 | mm |
AG100 – max. height with 100mm testing actuator | 2725 | 2975 | 3225 | mm |
AG250 – max. height with 250mm testing actuator | 3025 | 3275 | 3525 | mm |
B - max. width | 720 | 720 | 720 | mm |
C - max. depth | 1360 | 1360 | 1360 | mm |
F - height of top edge of lower crosshead | 995 | 995 | 995 | mm |
K - total weight2 | 1080 | 1095 | 1120 | kg |
C1 – max. depth of test frame | 450 | 450 | 450 | mm |
D1 - distance between columns | 460 | 460 | 460 | mm |
E – column diameter | 65 | 65 | 65 | mm |
G – max. test area height3 | 1070 | 1320 | 1570 | mm |
H – max. working test area height4 | 310 to 1010 | 560 to 1260 | 810 to 1510 | mm |
Frame stiffness at 1000mm crosshead separation | 300 | 300 | 300 | kN/mm |
T-slots | as per DIN 650 12H12, spacing 80 mm | |||
Connection size | Ø 70 mm, 6 x M8 and Ø 115 mm, 4 x M8 | |||
Clamping/ adjustment: manual/manual | 1037238 | 1037462 | 1037469 | |
Clamping/ adjustment: manual/hydraulic | 1036930 | 1036931 | 1037473 |
- Required for use with temperature chamber
- With oil and 100mm testing actuator, no grips
- Distance between upper and lower crossheads
- Distance between piston flange and lower crosshead with piston retracted
Test area height | Standard | Extended by 500 mm1 | |
Dynamic nominal force | 50/100 | 50/100 | kN |
A – max. height of end of column | 2320 | 2820 | mm |
(with alignment fixture) | (2430) | (2930) | mm |
B – max. width | 860 | 860 | mm |
C – max. depth | 2000 | 2000 | mm |
D1 – distance between columns | 445 | 445 | mm |
E – column diameter | 80 | 80 | mm |
F – height of top edge of lower crosshead | 872 | 872 | mm |
G – max. height of test area2 | 350 ... 1175 | 600 ... 1680 | mm |
K – total weight3 | 1700 | 1750 | kg |
Frame stiffness at 1000 mm crosshead separation | 500 | 500 | kN/mm |
Connection dimension | Ø 105 mm, 12 x M10 | ||
HC 100 – clamping/adjustment: hydraulic/hydraulic | 1085595 | 1085611 | |
HC 50 – clamping/adjustment: hydraulic/hydraulic | 3010277 | 3010276 |
- Required for use with temperature chamber
- Distance between piston flange and lower crosshead with piston retracted
- With oil and 100 mm testing actuator, no grips
Noise level | <58 | dB(A) |
System pressure | 210 | bar |
Nominal output | 10.7 | l/min |
Volume, oil reservoir | 160 | l |
Coolant water req. at 32 °C | 5 | l/min |
Electrical supply | 400, 3PH/N/PE, 50 Hz1 | V |
Motor power rating | 5 | kW |
Weight with oil | 690 | kg |
Item No. | 1036929 |
- Or: 440 V, 3PH/N/PE, 60 Hz
Noise level | <58 | dB(A) |
System pressure | 280 | bar |
Nominal output | 30 | l/min |
Volume, oil reservoir | 160 | l |
Coolant water req. at 32 °C | 30 | l/min |
Electrical connection | 400, 3PH/N/PE, 50 Hz1 | V |
Motor power rating | 15 | kW |
Item No. | 3009244 |
- Or: 440 V, 3PH/N/PE, 60 Hz