Siemens Gamesa wind turbine SG 2.2-122

SG 2.2-122

Onshore wind turbine

Greater capacity factor in low-wind sites
Boasting a 122-meter rotor combined with a 2.2 MW generator, the SG 2.2-122 is especially suited to Class S sites, thanks to its extremely low power density for a reduced Levelized Cost of Energy.
Customer Contact

Would you like to know more about the SG 2.2-122? Are you interested in partnering with Siemens Gamesa?

comercial_consultas@siemensgamesa.com
Rotor diameter
122 m
Nominal power
2.2 MW
Technology
Geared
Wind class
IEC III/S
Key Facts
  •  Minimum power density and high efficiency for reduced LCoE
  •  One of the greatest capacity factors for low-wind low-turbulence conditions
  •  Proven technology with optimized design, prototyping, validation and industrialization processes
  •  High reliability, with an average fleet availability greater than 98%
Recommended for

Low wind, onshore locations

Other models in the platform
Model Rotor Dia. Wind type
SG 2.1-114 114 m For low to medium wind
SG 2.6-114 114 m For medium to high wind
SG 2.9-129 129 m For low to medium wind
A high performer in low-wind sites
Technical specification
General details
Rated power 2.2 MW
Wind class IEC III/S
Control Pitch and variable speed
Standard operating temperature Range from 0ºC to 40ºC (1)
Rotor
Diameter 122 m
Swept area 11,690 m²
Power density 188.19 W/m²
Blades
Length 60 m
Airfoils Siemens Gamesa
Material Fiberglass reinforced with epoxy or polyester resin
Tower
Type Multiple technologies available
Height 108, 127 m and site-specific
Gearbox
Type 3 stages
Generator
Type Doubly-fed induction machine
Voltage 690 V AC
Frequency 50 Hz/60 Hz
Protection class IP 54
Power factor 0.95 CAP-0.95 IND throughout the power range (2)

(1) Different versions and optional kits are available to adapt machinery to
high or low temperatures and saline or dusty environments.

(2) Power factor at generator output terminals, on low voltage side before
transformer input terminals.

One of the greatest capacity factors in low-wind sites
Graphic
AEP increase SG 2.2-122 vs SG 2.1-114
The SG 2.2-122 wind turbine is an addition to the Siemens Gamesa 2.X product platform, a benchmark in the wind power sector thanks to its excellent capacity factor, high profitability. Specifically optimized for low-wind, low-turbulence conditions, this model seeks competitive positioning in markets with locations of this type, such as China and India, through its low power density and reduced Levelized Cost of Energy.
Technological Highlights
Our onshore approach is focused on geared technology, in which we have extensive knowledge and expertise. The hallmarks of Siemens Gamesa turbines are: reliability, robustness and a modular, flexible design for optimum adaptation and maximization of production at any site and in all wind conditions.
As an aerodynamic blade add-on, DinoTails® Next Generation reduces the sound power levels by using a serrated trailing edge mounted at the blade and adding finer combs in between the teeth. This world-leading noise reduction technology enables us to create value for our customers by maximizing AEP and reducing the LCoE in sites with noise constraints.
This turbine is equipped with blades made of fiberglass reinforced with epoxy or polyester resin. Together with the state-of-the-art aerodynamic profile, we can produce lighter blades having greater strength and improved dynamic behavior with less load transmitted to the rest of the components.
Turbine sensors continuously transmit data to our diagnostic centers, enabling the early detection of anomalies and preventing potential failures. By analyzing vibration patterns we can optimize your service plan and anticipate repairs before serious damage occurs.
The pioneering RecyclableBlade is an option based on our proven IntegralBlade® technology and manufacturing follows the exact same process with only a change of resin. The new resin is as strong and reliable as before, but with added recyclability benefits. After reaching end-of-life and decommissioning the blade materials can be separated and recycled in new applications.
GreenerTower is an option, which focuses on achieving significant CO2 equivalent reductions in the steel plate production for steel towers. For the GreenerTower, a maximum of 0.7 tons of CO2 equivalent emissions are permitted per ton of steel. This means a CO2 reduction on the tower steel plates of at least 63% compared to conventional steel production.
Downloads
Need Help?
The solutions we provide are driven by the benefits they deliver. This applies as much to our pursuit of absolute safety as to maximizing your return. Whether by inventing a new technology, evolving an existing product, or simply finding a smarter way of working, we strive to lower costs and raise returns on investments.

Our experts are on hand to help with any questions you have. Email us or login to our customer portal. Here you’ll be able to monitor configuration, production, and agreements for your wind power plants, and find relevant news from Siemens Gamesa Renewable Energy.

Operating in around 90 countries, Siemens Gamesa offers an extensive range of onshore wind turbine technologies to cover all wind classes and site conditions. By listening to our customers - and backed up by over 40 years of experience - we know just what it takes to develop and manage a successful onshore project.
Further onshore wind platforms

Share

Further information about data protection can be found in our privacy policy.