Intrinsically Safe Loop Calibrator
Intrinsically safe, handy loop calibration device for easy calibration and maintenance.
Find out moreProduct Description
The 707Ex is an intrinsically safe loop calibrator for use in explosive areas.
In addition, this calibrator meets the requirements of the ATEX Directive for Zones 1 and 2 as well as for Division 2 for the North American market.
Download data sheetFeatures
- Simultaneous mA and % readout for quick, easy, interpretation of readings
- 25% step-function
- 0-100% "span check" for fast confirmation of zero and span
- 0-20 mA or 4-20 mA default start up modes
Technical Data
- mA accuracy of 0.015%
- 1 μA resolution for mA source, simulate and measure
- HART® compatible resistance is connected in series with the loop supply for compatibility with HART® communicators
Humidity | 95% (0 °C … +30 °C / +32 °F … +86 °F) 75% (+30 °C … +40 °C / +86 °F … +104 °F) 45% (+40 °C … +50 °C / +104 °F … +122 °F) |
Ambient temperature | -10 °C … +50 °C (+14 °F … +122 °F) |
Storage temperature | -30 °C … +60 °C (-22 °F … +140 °F) |
Operating time | 18 h typical, at 12 mA |
Power supply | 1x 6LR61 according to IEC (type approved) |
Dimensions | 164 mm x 75 mm x 47 mm (~ 6.5" x 3" x 1.9") |
Weight | 350 g (~ 12.3 oz) |
Specifications
Function | Range | Resolution | Accuracy |
Voltage measure | 0 V … 28 V | 0.001 V | ±0.015% of reading +2 digits |
mA-measure | 0 mA … 24 mA | 0.001 mA | ±0.015% of reading +2 digits |
mA-source* | 0 mA … 24 mA | 0.001 mA | ±0.015% of reading +2 digits |
mA-simulate** | 0 mA … 24 mA | 0.001 mA | ±0.015% of reading +2 digits |
Loop Power | 24 V | 24 V ±1 V DC |
Specifications apply at: +18 °C … +28 °C
Temperature Coefficient, -10 °C … +18 °C, +28 °C … +55 °C: ±0.005% of range per °C;
* Max load, 700 Ohms at 20 mA
** Max applied voltage for simulation, 28 V
Ex Certificates
- Class I, Division 2, Groups A,B,C,D T4
Scope of Supply
- 707Ex
- Ex-Holster
- Test leads
- Aligator test clips
- Battery
- CD-ROM
- Calibration Statement
- Instruction manual