ACCESSORIES FOR DRUM PUMPS
Barrel adapter
for secure fixing of drum pump in bung hole of a drum G 2″.
The barrel adapters fit due to their 2″ thread in 60 and 200 liter steel drums. For use with plastic drums or plastic containers they can be combined with the thread adapters.
| Polypro- pylene |
Order-No. |
|---|---|
| Ø 41 mm | 9001 |
| Stainless steel | Order-No. |
| Ø 41 mm | 9002 |
Barrel adapter with ring adjustment
For securely fastening the drum pump in the bunghole of a barrel with G2″.
Due to its 2″ thread, the barrel adapter fits in 60 and 200 liter steel barrels. The version with the adjusting ring enables to adjust the height of the pump if, for example, it is to be prevented that deposited sediments at the bottom of the barrel are sucked in or pumped out. For use with plastic drums or plastic canisters, these can be combined with thread adapters.
| Polypro- pylene |
Order-No. |
|---|---|
| Ø 41 mm | 9001b |
Hose connectors
in stainless steel with clamps made of aluminium (connection to pump tube female thread 1¼” and connection to nozzle female thread 1″).
| Oder-No. | |
|---|---|
| 2 pcs. | 9010 |
| 1" / 1 pcs. | 9010a |
| 1¼" / 1 pcs. | 9010b |
Bounding ground set
Absolutely necessary when pumping flammable liquids or in hazardous areas. Serves as an electrically conductive connection between the drum pump and the container, as well as equipotetial bonding.
| Oder-No. | |
|---|---|
| Set 4 cables | 9003 |
| 1 Ground cable 0,5 m | 9003/1 |
| 1 Ground cable 1 m | 9003/2 |
| 1 Ground cable 2 m | 9003/3 |
| 1 Ground cable 3 m | 9003/4 |
PVC-Hose
crystal clear with fabric lining, suitable for non flammable, neutral and aggressive media.
Operating pressure: 10 bar*
Temperature: –35°C up to +60°C*.
| DW | Oder-No. |
|---|---|
| ¾" | 9050 |
| 1" | 9051 |
| 1¼" | 9052 |
| 1½" | 9053 |
Universal chemical- and solvent hose, conductive
inner wall homogeneous, smooth, EPDM (Ethylene Propylene-Rubber) conductive, suitable for many alkalies, acids, acetates, aldehydes, amines, esters, ethers and ketones, not suitable for carbonic gassy products and their derivates as well as for oils and gasoline.
Operating pressure: 16 bar*
Temperature: –40°C up to +90°C*
| DW | Oder-No. |
|---|---|
| ¾" | 9055 |
| 1" | 9056 |
| 1¼" | 9057 |
| 1½" | 9058 |
Multi purpose chemical hose, conductive
inner wall homogeneous, smooth, UHMWPE (UPE), conductive, suitable for nearly all chemicals, oils and gasoline. Not suitable for oleum, brom and chlorsulfon acide.
Operating pressure: 10 bar*
Temperature: –25°C up to +90°C*
| DW | Oder-No. |
|---|---|
| ¾" | 9060 |
| 1" | 9061 |
| 1" FDA |
9061b |
| 1¼" | 9062 |
| 1½" | 9063 |
Mineral oil hose
½" PN10 with fabric lining
¾" PN10 with fabric lining
1" PN10 with fabric lining
1¼" PN16 TW-hose
1½" PN16 TW-hose
| DW | Oder-No. |
|---|---|
| ½" | 9065a |
| ¾" | 9065 |
| 1" | 9066 |
| 1¼" | 9067 |
| 1½" | 9068 |
Rubber hose food grade BUTYL/BUTYL
suitable for animal and vegetable fat and oils, milk products, mineral water, fruit juice and alcohol up to 92%.
Temperature: up to 120°C*.
| NW | Order-No. |
|---|---|
| ¾" | 9069a |
| 1" | 9069 |
| 1¼" | 9069b |
| 1½" | 9069c |
Discharge arc
for transferring and filling liquids directly into other vessels. They are available in PP, Alu and stainless steel 316Ti and can be connected directly at the discharge side of a drum pump via a wing nut.
| Material | Oder-No. |
|---|---|
| PP | 9072 |
| ALU | 9073 |
| Stainless steel | 9074 |
Stainless steel hose clamp
for secure fixing of hose at hose barb.
| DN | DW | Oder-No. |
|---|---|---|
| DN 12-20 | ½ | 9224 |
| DN 16-25 | ¾" | 9000 |
| DN 20-32 | 1" | 9004 |
| DN 25-40 | 1¼" | 9226 |
| DN 40-60 | 1½" | 9228 |
Safety clamp made of tool steel
for a secure fixing of barrel pump in open containers and open drums.
| Oder-No. | |
|---|---|
| 9005 |
Emission proof drum adapter
for pump tube diameter 41 mm, FKM-seals, thread 2". Prevent emission of harmful gases and vapours out of the drum. A vacuum in drum is equalized by a valve.
| Material | Oder-No. |
|---|---|
| Polypropylene | 9024 |
| Stainless steel 316Ti | 9026 |
Screw cap for IBC
IG 2", optional with barrel adapter PP Ø 41 mm
| Oder-No. | |
|---|---|
| IBC DN 225 (black) | 9071 |
| IBC DN 150 (red) | 9071a |
| IBC DN 225 (green) | 9071b |
| IBC DN 150 (green) | 9071c |
| Barrel adapter PP | 9001 |
Wall hanger for drum pumps
for a secure storage of drum pumps when out of operation and for protection against damage.
| Oder-No. | |
|---|---|
| 9006 |
Nozzle made of polypropylene
Housing and internal parts made of polypropylene, valve seat and O-rings made of FKM or EPDM, spring of hastelloy 2.4610, rotatable hose connection.
Flow rate: 80 l/min*
Viscosity: 800 mPas*
Operating pressure: 3 bar*
Weight: 210 g
| DW | Order-No. |
|---|---|
| FKM ½" | 9101 |
| FKM ¾" | 9102 |
| FKM 1" | 9103 |
| FKM IG 1" | 9120 |
| EPDM ½" | 9104 |
| EPDM ¾" | 9105 |
| EPDM 1" | 9106 |
| EPDM IG 1" | 9121 |
| IG: Internal thread AG: External threade |
Nozzle made of PVDF
Housing and internal parts made of polypropylene, valve seat and O-rings made of FKM or EPDM, spring of Hastelloy 2.4610, rotatable hose connections.
Flow rate: 80 l/min*
Viscosity: 800 mPas*
Operating pressure: 3 bar*
Weight: 210 g
| DW | Order-No. |
|---|---|
| FKM ½" | 9107 |
| FKM ¾" | 9108 |
| FKM 1" | 9109 |
| FKM IG 1" | 9122 |
| EPDM ½" | 9110 |
| EPDM ¾" | 9111 |
| EPDM 1" | 9112 |
| EPDM IG 1" | 9123 |
| FFKM ½" | 9113 |
| FFKM ¾" | 9114 |
| FFKM 1" | 9115 |
| FFKM IG 1" | 9116 |
Manual nozzle made of polypropylene with outlet spout Ø 25 mm
Housing and internal parts made of white polypropylene, valve seat and O-rings made of NBR, spring made of stainless steel.
Flow rate: 100 l/min*
Viscosity: 800 mPas*
Operating pressure: 2 bar*
| DW | Order-No. |
|---|---|
| NBR ¾" | 9117 |
| NBR 1" | 9118 |
* Test media water 20°C, 2 m horizontal pressure pipe 1″, oval gear meter 1″, measured values: ± 5%
Manual nozzle made of polypropylene for AdBlue®**, with stainless steel outlet spout in Ø 19 mm
Housing and internal parts made of white polypropylene, valve seat and O-rings made of FKM, spring made of stainless steel.
Flow rate: 80 l/min*
Viscosity: 800 mPas*
Operating pressure: 2 bar*
| DW | Order-No. |
|---|---|
| FKM ¾" | 9015 |
| FKM 1" | 9015b |
Automatic nozzle made of stainless steel for AdBlue®**, with a outlet spout in Ø 19 mm for trucks, swivel hose connection
Housing and internal parts made of stainless steel, valve seat and O-rings of FKM, spring of stainless steel.
Flow rate: 80 l/min*
Viscosity: low
Operating pressure: 3,4 bar*
| DW | Order-No. |
|---|---|
| FKM ¾" | 9024 |
| FKM 1" | 9025 |
Nozzle made of nickel-plated brass, PTFE seals, rotatable hose connection
For filling and transferring neutral and aggressive media and liquids, also in the field of pharmaceutical and the food industry. Housing and internal parts are made, of nickel-plated brass. Seals made of PTFE.
Flow rate: 80 l/min*
Viscosity: 750 mPas*
Operating pressure: 4 bar*
Temperature: max. 80°C*
Weight: 1 kg*
Various connection options
(Hose connection, thread)
| DW | Order-No. |
|---|---|
| ¾" | 9041 |
| 1" | 9042 |
| 1¼" | 9043 |
| AG 1" |
9044 |
| AG 1¼" | 9045 |
| IG 1" | 9046 |
* Test media water 20°C, 2 m horizontal pressure pipe 1″, oval gear meter 1″, measured values: ± 5%
** AdBlue® is a registered trademark of the Verband der Automobilindustrie e. V. (VDA)
Nozzle made of stainless steel 316Ti
for use in chemical, pharmaceutical and food-industry. Housing and inner parts of stainless steel, seals of PTFE.
Flow rate: 80 l/min*
Viscosity: 750 mPas*
Operating pressure: 4 bar*
Temperature: max. 80°C
Weight: 1 kg
| DW | Order-No. |
|---|---|
| 1" | 9013 |
| AG 1" | 9013a |
| AG ¾" | 9013b |
| IG 1" | 9013c |
| IG: Internal thread AG: External thread |
|
Nozzle made of Aluminium
for diesel, female thread, suitable to discharge hose male thread.
Flow rate: 60 l/min*
| DW | Order-No. |
|---|---|
| Nozzle with IG 1″ | 9032 |
| Hose connectiion brass ¾” | 9032a |
| Hose connection brass 1″ | 9032b |
Clamping flange made of polypropylene
for IBC-Container (to fix a pump with Ø 40/41 mm), Ø 140 mm, 4-holes, screw-hole circle 115 mm.
| Order-No. | |
|---|---|
| 9070 |
* Test media water 20°C, 2 m horizontal pressure pipe 1″, oval gear meter 1″, measured values: ± 5%
Strainer
Protects the barrel pump when abrasive particles are present.
Polypropylene
size of slots 1,5 x 12 mm, tube-Ø 40, 41 or 42 mm
Stainless steel
316Ti size of slots 1,5 x 20 mm, tube-Ø 41 mm
PVDF
size of slots 1,5 x 12 mm, tube-Ø 41 mm
| Material | Oder-No. |
|---|---|
| Polypropylene | 9011 |
| Stainless steel 316Ti | 9012 |
| PVDF | 9230 |
Explosion proof plug – Explosion proof socket
Ex de IIC T6, protection class IP 65, 16 Ampere
| CEE-round plug | Order-No. |
|---|---|
| 3-pole | 5055 |
| 5-pole | 5056 |
| CEE-round socket | Order-No. |
| 3-pole | 5057 |
| 5-pole | 5058 |
Electronic flowmeter of stainless steel
on both sides female thread 1″, ATEX.
Electronic turbine-wheel flowmeter, reset-table display for subset, flow volume in l/min, non resettable total amount.
Flow range: 19 l/min to 190 l/min*
Life time of battery: app. 2.000 h
Accuracy: ± 1%
Materials: Stainless steel housing, all parts that will get in contact with medium are made of stainless steel, PVDF, ferrit, wolfram-carbide, ceramic and rubber.
| Order-No. | |
|---|---|
| Electronic flowmeter | 9008 |
* Test media water 20°C, 2 m horizontal pressure pipe 1″, oval gear meter 1″, measured values: ± 5%
Electronic flowmeter
uncalibrated oval gear meter made of Alu.
| Version | Order-No. |
|---|---|
| Oil, ¾" IG 6-60 l/min, 70 bar |
9037 |
| Diesel, 1" IG 10-100 l/min, 30 bar |
9038 |
| Oil + Diesel, 1½" IG 50-150 l/min, 20 bar |
9039 |
Reduction unit in stainless steel
| Connection | Order-No. |
|---|---|
| 1" to ¾" IG | 9037 |
| 1¼" to 1" IG | 9038 |
| 1½" to 1" IG | 9039 |
Double nipple in stainless steel
| Connection | Order-No. |
|---|---|
| ¾" to ¾" IG | 9204 |
| 1" to 1" IG | 9205 |
| 1" to ¾" IG | 9206 |
| 1¼" to 1" IG | 9207 |
| 1½" to 1" IG | 9208 |
| IG: Internal thread AG: External thread |
|
Electronic flowmeter
FM 120, housing of PP or PVDF, outer thread G 1″, seal of FKM
Measuring principle: Turbine meter
Viscosity: 20 mPas*
Flow rate: 20–120 l/min*
Versions:
FM 120 Standard version
FM 120 M01, as the standard version but with quantity preset and switch output open drain, incl. 1 m cable with three-pole diode plug for controlling a pump or for opening and closing of a magnetic valve. This counter can be combined either with a special barrel pump motor, or the remote control switch (see below 9028).
FM 120 I, as the standard version but with pulse output, incl. 1 m three-wire cable without a plug. Quadrature signal, open drain.
| Version | Order-No. |
|---|---|
| FM120 PP | 9020 |
| FM120 PP M01 | 9020a |
| FM120 PP I | 9020b |
| FM120 PVDF | 9021 |
| FM120 PVDF M01 | 9021a |
| FM120 PVDF I | 9021b |
Electronic kit for quantity preset
for installation in the motor handle or in a plug housing (without mounting).
| Order-No. | |
|---|---|
| Electronic kit | 9027 |
Remote switch in the plug housing
for controlling a pump or a magnetic valve with integrated electronics.
| Order-No. | |
|---|---|
| Remote switch | 9028 |
Fittings of polypropylene for counter FM 120 PP.
| Version | Order-No. |
|---|---|
| Counter – Pump tube (IG 1" to IG 1¼") |
1111 |
| + 1 Seal of PTFE Ø 30 mm |
2194 |
| + 1 Seal of PTFE Ø 40 mm |
2195 |
| Counter – PP nozzle (IG 1" to IG 1") |
1109 |
| + 2 Seals of PTFE Ø 30 mm |
2194 |
| Hose connector (IG 1" to hose connector 1") | 1107 |
| + 1 Seal of PTFE Ø 30 mm |
2194 |
Mechanical flowmeter K33/K44
made of Alu/plastic, ca. 20–120 l/min*, 10 bar*, on both sides fem. threads 1″, for viscosities from 30–2000 mPas*, especially suitable for lubricants, heating oil/diesel, anti freezing liquid (undiluted) and vegetable oils (different flowmeters!).
| Order-No. | |
|---|---|
| Display 3 digits | 9035 |
| Display 4 digits | 9036 |
