DRUM PUMP SETS (PP) FOR CHEMICALS
From JESSBERGER are the perfect assistents for fast and safe filling and transferring or emptying of drums and containers.
Drum pump-Sets PP are suitable for neutral, aggressive and hardly combustible liquids. They are used specifically for pumping aggressive chemicals such as acids, alkalies or detergents
Drum pump, hose and pump nozzle were perfectly matched based on our decades of experience and guarantee therefore an immediate usability and durability of our drum pumps.
Each of our drum pump sets consists of an electric or air operated drum pump motor, a pump tube suitable for the application, two meter media-proof dispensing hose and a nozzle, which facilitates filling and transferring.
Outside of hazardous areas you can combine each pump tube with each drum pump motor and corresponding accessories and therefore select the a individual drum pump set from JESSBERGER.
Drum Pump Set with electric motor for light acids and alkalis
JP-140 PP (HC) Universal motor JP-140, 230 V, 50/60 Hz, 450 W, protection class IP 24, double insulated category II, over load protection switch with low voltage release, thermo protection, 5 m cable and plug.
Pump tube:
Polypropylene, outer-Ø 41 mm, HC-shaft 2,4610
Connection thread G 1¼"
Hose connection 1" (DN 25)
2 m PVC-Hose 1" (DN 25)
2 Hose clamps Stainless steel
1 Nozzle Polypropylene 1"
| Operating data JP-140 | |
|---|---|
| Flow rate (with hose and oval gear meter) | Ø 41 mm up to 87 l/min* (Rotor) |
| Head | Ø 41 mm up to 10 m* (Rotor) |
| Viscosity | up to 400 mPas* |
| Density | up to 1,3* |
| * All physical data are real measured maximum values. * Test medium water 20° C, 2 m pressure pipe 1", oval gear meter 1", measured values: ± 5% Attention: When using a nozzle, the flow rate is reduced to app. 60-80 l/min (depends on the pump and application). |
|
| Length | Order-No. |
|---|---|
| Set with pump tube 1000 mm | |
| 230 V |
1141 4110 |
Drum Pump Set with electric motor for light acids and alkalis
JP-160 PP (HC) Universal motor JP-160, 230 V, 50/60 Hz, 460 W, protection class IP 24, double insulated category II, over load protection switch with low voltage release, 5 m cable and plug.
Pump tube:
Polypropylene, outer-Ø 41 mm, HC-shaft 2,4610
Connection thread G 1¼"
Hose connection 1" (DN 25)
2 m PVC-Hose 1" (DN 25)
2 Hose clamps Stainless steel
1 Nozzle Polypropylene 1"
| Operating data JP-160 | |
|---|---|
| Flow rate (with hose and oval gear meter) | Ø 41 mm up to 82 l/min* (Rotor) |
| Head | Ø 41 mm up to 9 m* (Rotor) |
| Viscosity | up to 400 mPas* |
| Density | up to 1,3* |
| * All physical data are real measured maximum values. * Test medium water 20° C, 2 m pressure pipe 1″, oval gear meter 1″, measured values: ± 5% Attention: When using a nozzle, the flow rate is reduced to app. 60-80 l/min (depends on the pump and application). |
|
| Length | Order-No. |
|---|---|
| Set with pump tube 1000 mm | |
| 230 V |
1161 4110 |
| Set with pump tube 1200 mm | |
| 230 V | 1161 4112 |
Drum Pump Set with electric motor for light acids and alkalis
JP-180 PP (HC) Universal motor 230 or 115 V, 50/60 Hz, 640 W, splash protection to IP 24, double insulated class II, over load protection switch with low voltage release, 5 m cable with plug.
Pump tube:
Polypropylene, outer-Ø 41 mm, HC-shaft 2,4610
Connection thread G 1¼"
Hose connection 1" (DN 25)
2 m PVC-Hose 1" (DN 25)
2 Hose clamps stainless steel
1 Nozzle polypropylene 1"
| Operating data JP-180 | |
|---|---|
| Flow rate (with hose and oval gear meter) | Ø 41 mm up to 93 l/min* (Rotor) |
| Head | Ø 41 mm up to 11 m* (Rotor) |
| Viscosity | up to 600 mPas* |
| Density | up to 1,5* |
| * All physical data are real measured maximum values. * Test medium water 20° C, 2 m pressure pipe 1″, oval gear meter 1″, measured values: ± 5% Attention: When using a nozzle, the flow rate is reduced to app. 60-80 l/min (depends on the pump and application). |
|
| Length | Order-No. |
|---|---|
| Set with pump tube 1000 mm | |
| 230 V |
1181 4110 |
| 115 V | 1182 4110 |
| Set with pump tube 1200 mm | |
| 230 V | 1181 4112 |
| 115 V | 1182 4112 |
Drum pump set with electric motor for media with higher viscosity
JP-280 PP (HC) Universal motor 230 or 115 V, 50/60 Hz, 825 W, splash protection to IP 24, double insulated class II, over load protection switch with low voltage release, 5 m cable with plug.
Pump tube:
Polypropylene, outer-Ø 41 mm, HC-shaft 2,4610
Connection thread G 1¼"
Hose connection 1" (DN 25)
2 m PVC hose 1" (DN 25)
2 Hose clamps stainless steel
1 Nozzle polypropylene 1"
| Operating data JP-280 | |
|---|---|
| Flow rate (with hose and oval gear meter) | Ø 41 mm up to 112 l/min* (Rotor) |
| Head | Ø 41 mm up to 16 m* (Rotor) |
| Viscosity | up to 1000 mPas* |
| Density | up to 1,9* |
| * All physical data are real measured maximum values. * Test medium water 20° C, 2 m pressure pipe 1″, oval gear meter 1″, measured values: ± 5% Attention: When using a nozzle, the flow rate is reduced to app. 60-80 l/min (depends on the pump and application). |
|
| Length | Order-No. |
|---|---|
| Set with pump tube 1000 mm | |
| 230 V |
1281 4110 |
| 115 V | 1282 4110 |
| Set with pump tube 1200 mm | |
| 230 V | 1281 4120 |
| 115 V | 1282 4120 |
Drum pump set with electric motor for alkalis
JP-280 PP (HC) Universal motor 230 or 115 V, 50/60 Hz, 825 W, splash protection to IP 24, double insulated class II, over load protection switch with low voltage release, 5 m cable with plug.
Pump tube:
Polypropylene, outer-Ø 41 mm, HC-shaft 2,4610
Connection thread G 1¼"
Hose connection 1" (DN 25)
2 m Universal chemical- and solvent hose, 1" (DN 25)
2 Hose clamps stainless steel
1 Nozzle polypropylene 1", EPDM
| Operating data JP-280 | |
|---|---|
| Flow rate (with hose and oval gear meter) | Ø 41 mm up to 112 l/min* (Rotor) |
| Head | Ø 41 mm up to 16 m* (Rotor) |
| Viscosity | up to 1000 mPas* |
| Density | up to 1,9* |
| * All physical data are real measured maximum values. * Test medium water 20° C, 2 m pressure pipe 1″, oval gear meter 1″, measured values: ± 5% Attention: When using a nozzle, the flow rate is reduced to app. 60-80 l/min (depends on the pump and application). |
|
| Length | Order-No. |
|---|---|
| Set with pump tube 1000 mm | |
| 230 V |
1281 4114 |
| Set with pump tube 1200 mm | |
| 230 V | 1281 4124 |
Drum Pump Set with electric motor for light acids and alkalis
JP-360 PP (HC) Universal motor 230 V, 50/60 Hz, 640 W, IP 55, protection class I, with low voltage release, on/off switch, 5 m cable with plug.
Pump tube:
Polypropylene, outer-Ø 41 mm, HC-shaft 2,4610
Connection thread G 1¼"
Hose connection 1" (DN 25)
2 m PVC hose 1" (DN 25)
2 Hose clamps stainless steel
1 Nozzle polypropylene 1"
| Operating data JP-360 | |
|---|---|
| Flow rate (with hose and oval gear meter) | Ø 41 mm up to 93 l/min* (Rotor) |
| Head | Ø 41 mm up to 11 m* (Rotor) |
| Viscosity | up to 600 mPas* |
| Density | up to 1,5* |
| * All physical data are real measured maximum values. * Test medium water 20° C, 2 m pressure pipe 1″, oval gear meter 1″, measured values: ± 5% Attention: When using a nozzle, the flow rate is reduced to app. 60-80 l/min (depends on the pump and application). |
|
| Length | Order-No. |
|---|---|
| Set with pump tube 1000 mm | |
| 230 V |
1363 4110 |
| Set with pump tube 1200 mm | |
| 230 V | 1363 4112 |
