email hidden; JavaScript is required

ZMP – Stainless Steel Mechanical Seal Chemical Process Crushing Pump

Discover the benefits of the ZMP produced by CP here – The 3-In-One stainless steel pump: crushing, mixing and pumping for granulates.

The ZMP crushes, mixes and pumps multi-phase media simultaneously. Teeth on the rotor and casing liner reduce the solids in the medium to a defined maximum particle size. Slits and holes permit both coarse suspensions to be pumped and softer particles to be ground. The mechanical seal design allows flexible adaptation to process requirements.

Overview

Special features

  • Ideal for high solid contents (up to 40 %).*
  • Grinds, mixes and pumps multi-phase media simultaneously.
  • Ideal for pumping coarse suspensions and also grinding soft particles.
  • Front play between rotor and bushing segment can be optimally adjusted from outside.

Construction

  • Standard commercially available mechanical seal
  • Horizontal installation
  • Nominal pressure up to PN 16 max. (=enables wide application range)
  • Differently adapted casing liner available depending on grinding level
  • Rotor fastened diagonally on the shaft leads to an axial and radial acceleration of the medium (=overlapping movements intermix the medium)
  • Tooth systems on the rotor and on the casing liner reduce the contained solids to a maximum defined particle size.

Assembly & repair

  • Modular system made up of few individual parts
  • Assembly friendly

*In general, media with solids content can be transported, but application-specific verification in advance is necessary.

Technical data

Pin Open all

Options

Pin Open all
Capacities Arrow Black

SI: 0.5 to 220 m³/h
US: 2.2 to 968.6 gpm

Heads Arrow Black

SI: 2 to 14 m
US: 6.6 to 45.9 ft

Pressure rating Arrow Black

PN 10 / PN 16

Temperatures Arrow Black

SI: -20 to +180°C
US: -4 to +356°F

Kinematic viscosities Arrow Black

SI: 0.5 to 1000 mm²/s
US: 0.5 to 1000 cSt

Solid handlings Arrow Black

Highly suitable because of the abrasion-resistant pump chamber

Casing Materials Arrow Black

Stainless steel 1.4581 (~316)
Stainless steel (e.g. 1.4306, Uranus® B6)
Duplex alloys (e.g. 1.4517)
Nickel-base alloys (e.g. Hastelloy® C-4, C-22)
Nickel (e.g. 2.4170)

Working Principle Arrow Black

Radial flow pump

Priming Method Arrow Black

Flooded suction

Sealing System Arrow Black

Standard commercialy available

Configuration types Arrow Black

EN standard
Bearing-frame (SI: -20 to +180°C/ US: -4 to +356°F)

Directives Arrow Black

EC Machinery Directive
EC ATEX Directive

Standards Arrow Black

DIN EN ISO 5199

Casing Arrow Black

Connection flanges
To EN 1092-1
Drilled to ANSI/ASME B16.5

Additional connections
Casing drain (with or without flange)
Manometer connection on the casing
Mechanical seal housing drain/vent

Gasket materials
PTFE-enveloped
Gylon® blue

Plug seal material
PTFE

Casing liner
With holes
With slots

Mechanical Seal Arrow Black

Standard commercially available

Mechanical Seal Barrier/Buffer Fluid Vessel Arrow Black

Vessel
Cooling coil, manometer, thermometer and sight glass
Total volume from 3 to 12 l (depending on vessel type)
Hand refill pump (depending on vessel type)

Vessel connections
Stainless steel braided PTFE hose
Stainless steel piping

Bracket
Steel
Stainless steel

Pump Protection Arrow Black

Engine load sensor

Barrier/buffer fluid monitoring
Level switch
Pressure switch
Temperature probe
Engine load sensor

Mounts Arrow Black

Types
Baseplate
Horizontal

Materials
Steel
Stainless steel

Stilts
Drip pan
Grounding lugs

Bearing Frame Arrow Black

Lubrication
Grease lubrication

Coupling
Coupling guard
Steel
Brass