Bünder & Schmitt GmbH
de_DEen_US
Filling and capping machines
Slider
.
.

Content

Trigger

Fully automatic circular screwing setup machine for spray pump caps with uptake and normal caps to be bounced upon.
The bottles pass via conveyor into the machine, are singularized by the worm feeder to be handed over to the central star. Simultaneously the triggers are transported towards the machine in a predefined orientation.
The screwing head takes place over the trigger head and the four press rolls are fixed to the union nut pneumatical. Each of them is powered. The suction pipe is taken pneumatic and centered over the bottles.
The Trigger pumps are tightened by servo motors. The stroke movement is realised with servo driven lifting spindles. The machine stops when a non closed bottle is recognized. The machine is delivered with a format set of bottles and caps, including about 3m long transport conveyor with frequency commanded conveyor drive.

Performance about 4000-8000 bottles per hour, smoothly adjustable, depending on the form of the trading units and screw cap or pump dimensions
Cap feed from sorter to closing unit via cap plate with brass feeding rail and stainless steel
Machine drive frequency drive
Transport
  • plastic slat conveyor chain with smoothly adjustable drive
  • Worm conveyor on machine running-in for handover to the star conveyor inside the machine
Screwing head drive servo drive, Torque adjustment via PLC .
Machine management Siemens SPS S7, control touch panel
Festo pneumatic valves and cams
Basic frame in solid steel-aluminum-construction, lacquered table sheets and side casing in stainless steel
Control device
  • running-in and running-out light barrier for fully automatic run
  • Cap control system in cap feeder
  • Cap control system after closing on machine running-out
Safety device
  • All-around covering against accidental intervention into the running machine
  • Panes made of Sekurit safety glass
  • Door protection by end switches
  • Star conveyor switch responding when recipients are blocking and thus protecting the machine against damage
  • Caps gate for the unhampered intake of closing caps
  • Bottle brake to avoid the turning of the bottles while screwing
Working height 900 mm +/- 50 mm

 Download File
This website uses cookies to improve your browsing experience. If you continue without changing your settings, you agree to the use of cookies.

>>> Here you will find further informations!
Accept