Thanks to the large hopper and the low loading height, material feeding with a wheel loader or excavator is simple and clean. The hopper can be angled at the touch of a button, which guarantees optimum material feed. The material is picked up in the shredding area by the cutting tools on the shafts and roughly shredded between them. In the second instance, the after breaker bars guarantee shredding to a desired size.
Depending on the selected after braker bar, the material is crushed into a predefined size. The particularly long, wide and troughed belts ensure a clean, blockage-free discharge with large dumping cones. Optionally, FE metals can be removed with a neodymium magnetic separator. 

With the help of the intelligent control system and the four pre-set and one individually adjustable shredding programme, no compromises are necessary in any application. The operator has the possibility to adjust speeds, rotation directions and programme times individually and thus achieve the optimum in the processing of his material. In conjunction with the modular and therfore qick to change after breaker bars the possibilities are almost limitless.

The standard equipment of the FORUS twin shaft shredders has many remarkable details and concepts:

• Choice between track, lift axle and hook lift frame
• Diesel-hydraulic or electro-hydraulic drive
• Radio remote control for all functions
• Modular after breaker bar quick-change system
• Hydraulically lift- and lowerable hopper
• Hydraulically lift- and lowerable overbelt magnet
• Cleanfix reversible fan
• Hopper automation for feed optimisation
• Eggersmann LLC (Long Live Coating)

In addition to the extensive standard equipment, we also offer optional solutions for our FORUS:

• Alternative after breaker bars for different sizes 
• (120mm, 150 mm, 300 mm and 500 mm)
• Additional wear protection / Marathon shredding shafts
• Hopper elevations in different variants
• A material moistening device against dust
• Winter package
• Summer package
• Lighting package

The two shaft shredders have some typical features of our Eggersmann mobile machines. For example, they follow our One-Logic principle - if you are familiar with one of our machines, you can intuitively operate all the others. In addition, the shredders have the following features:

• NRT – The Noise Reduction Technology reduces the sound pressure level by means of a setup specially adapted to the machine. In the process, the values are reduced far below the standard. The result: maximum noise protection at the workplace.
• MMS  –  The Minimum Maintenance System minimises the maintenance effort while extending the maintenance intervals.
• ASC – Auto Standby Control regulates the power output according to the current workload and stress. If there is no more material in the machine, the engine automatically throttles down so that less fuel is consumed. A new material feed is also detected automatically and the machine starts working again.

In addition, all FORUS are equipped with our Eggersmann Telematic. This is a mixture of remote service and machine monitoring. On the one hand, you can have all work data, as well as location and operating material consumption displayed live via the Internet on your PC, laptop or smartphone. On the other hand, the machine automatically sends malfunctions or pending maintenance to the responsible sales partner.

All model variants with tracks can be moved freely on the field via a radio remote control without a pulling machine. The crawler tracks also allow turning and reversing manoeuvres. The FORUS F 38 E has special integrated battery packs – this means that the electric version can also be driven and serviced without being connected to the power grid with the basic functions switched on.