In order to improve throughput and achieve the processing target, each TEUTON shredder can be specially adapted to a wide range of materials. On the one hand, there are special programmes for the behaviour of the rotor and, on the other hand, the rotor tools can be exchanged accordingly. For example, in addition to the versatile Multigrip tool, the Rootgrip tool can also be used specifically for processing roots. Combined with the root mode included in the system, excellent results can be achieved even faster in this difficult application.

With our TEUTON single shaft shredders, marketable end products with the right grain size can be created in just one step, if required. This is particularly practical when there are standards that must be met precisely – such as for tyres. There are two combinable options for this:    

Cutting Gap Adjustment (Standard)
On all our TEUTON shredders, the cutting gap between the rotor tools and the counter blades can be adjusted as standard to define the end grain. With the TEUTON Z 50 you can choose between six different settings, with the TEUTON Z 60 even between eleven different settings.

For the best possible working experience, our mobile TEUTON shredders are characterised by extensive standard equipment:

• Hight-increasing for the Hydraulic filling hopper (foldable on three sides)
• Hydromechanical rotor drive for the fastest reversing intervals and high resistance to foreign bodies
• Easily exchangeable rotor tools
• Hydraulic swing-out shredding flap for free access to the working chamber
• Adjustable cutting gap setting
• Fully lighted  engine compartment
• Large openings for the discharge of material
• IFM 7 Zoll Touch Panel 
• 30-channel radio system with display and emergency stop function
• Long and wide conveyor belts for maximum material discharge and large dumping cones
• Infinitely height-adjustable rear conveyor belt (discharge height max. 5,000 mm)

In order to adapt our TEUTON single shaft shredders even better to specific needs, we also offer some additional solutions:

• Screen basket system for even more precise definition of the final grain sizes
• Four different rotor tools for different applications
• Hydraulically height-adjustable neodymium overband magnet (ejection on both sides)
• Ecospray humidification system
• Ball adapter for simplified manoeuvring with a wheel loader

Our single shaft shredders have some typical features of our Eggersmann mobile machines. For example, they follow our One-Logic principle - if you are familiar with one of our machines, you can intuitively operate all the others. In addition, the shredders have the following features:

• NRT – The Noise Reduction Technology reduces the sound pressure level by means of a setup specially adapted to the machine. In the process, the values are reduced far below the standard. The result: maximum noise protection at the workplace.
• MMS  –  The Minimum Maintenance System minimises the maintenance effort while extending the maintenance intervals.
• ASC – Auto Standby Control regulates the power output according to the current workload and stress. If there is no more material in the machine, the engine automatically throttles down so that less fuel is consumed. A new material feed is also detected automatically and the machine starts working again.

In addition, all TEUTON are equipped with our Eggersmann Telematic. This is a mixture of remote service and machine monitoring. On the one hand, you can have all work data, as well as location and operating material consumption displayed live via the Internet on your PC, laptop or smartphone. On the other hand, the machine automatically sends malfunctions or pending maintenance to the responsible sales partner.

The rotor tools of our TEUTON shredders are double bolted and can be easily changed without any welding. In many cases, the counter tools can be re-welded via support layers and hardfacing if wear is detected at an early stage. With correct maintenance, the rotor tools can handle up to 10,000 t of material before they need to be replaced – the massive counter tools can even handle up to 100,000 t. This means that wear costs of less than 1 € per tonne can be achieved. 

Particularly when working in the recyclables recovery, disruptive material is often found in the throughput. However, our TEUTON shredders are shredders with slow-running rotors – they therefore offer the best possible balance of power, high throughputs and safety. So if a non-processable material – for example solid steel – gets into the machine, the rotor will try to unblock it by reversing automatically. If this does not succeed, the machine switches itself off and the impurity can be removed manually. The solid and robust finish provides additional protection against breakdowns.

All TEUTON shredders with crawler tracks can be moved freely around the company grounds by radio remote control. The crawler track even allows turning and reversing movements for maximum mobility. The TEUTON Z 50 E has an extra battery pack to enable it to be driven without a connection to the power grid, so that all secondary functions can also be used during operation. 
The TEUTON Z 50 with wheel chassis also has a radio remote control and can be moved freely on the company grounds. Driving in curves is not possible here, but straight-line windrow production is.