VORTEX - for polluted water, also with suspendes particles
VORTEX pumps by ZUWA are perfectly suitable for polluted water, also with solid contents. Depending on the model, they convey up to a particle size of 55mm.
- density of the medium: max. 1100 kg/m³
- temperature of the medium: itstemperaturmax. 50°C
- pH-value: 6 - 11
Applications
- draining excavation and shafts
- remove floodings
- disposal of sewage water
Agricultural applications
- draining of a milking parlour
- coneying silage sap or surface water
- watering in gardening and crop cultivation
Features
- housing and turning wheel made of grey cast iron
- engine in oil bath (thermical engine protection from 230V to 1,5kW)
- drive shaft of stainless steel
- mechaincal seal of silicon carbide
- float switch (only for 230V models)
Characteristic curves
Downloads
max. Fördermenge
max. Förderdruck
Nennspannung
VORTEX 100, 2850 min-1, 230 V Submersible Waste Water Pump with Float Switch
Art. Nr. 165017
Submersible Waste Water Pump with Float Switch flow rate max. litres 285 l/min flow rate max. m³ 17,1 m³/h max. pressure 0,9 bar Outlet 2" ft (DN 50) Impeller type cast iron, mechanical seal in silicium carbide For fluids with solid parts, free passage max. 45 mm Max. fluid temperature 40 °C Max fluid density 1100 kg/m³, pH 6-10 Material pump housing cast iron Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,75 kW, Rated current (AC) 6,2 A rotation max. 2850 min-1 Material motorshaft stainless steel Protection class IP68 , Insulation class F 10 m cable with plug frame size 440 x 194 weight 23 kg
VORTEX 100-CS plus, 2850 min-1, 230 V Submersible Grinder Pump w. float switch and cutti
Art. Nr. 165015A
With improved starting behaviour! flow rate max. litres 159 l/min flow rate max. m³ 9,54 m³/h max. pressure 1,7 bar Outlet 2" ft (DN 50) Impeller type cast iron, double mechanical seal Can not be used for cutting hard solids like metal, wood or metal For fluids ph 6-10 Max. fluid temperature 40 °C Material pump housing cast iron With cutting system in stainless steel With float switch Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,75 kW, Rated current (AC) 6,1 A rotation max. 2850 min-1 Material motorshaft stainless steel Protection class IP68 , Insulation class F Motor protection (thermal) yes, with manual reset on the 10 m cable 10 m cable with plug With special control box for an improved starting torque frame size 460 x 290 weight 23 kg
VORTEX 100-CS, 2850 min-1, 230 V Submersible Grinder Pump with Float Switch
Art. Nr. 165015
flow rate max. litres 159 l/min flow rate max. m³ 9,54 m³/h max. pressure 1,7 bar Outlet 2" ft (DN 50) Impeller type cast iron, double mechanical seal Can not be used for cutting hard solids like metal, wood or metal. For fluids ph 6-10 Max. fluid temperature 40 °C Material pump housing cast iron With cutting system in stainless steel With float switch Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,75 kW, Rated current (AC) 6,1 A rotation max. 2850 min-1 Material motorshaft stainless steel Protection class IP68 , Insulation class F Motor protection (thermal) yes, with manual reset on the 10 m cable 10 m cable with plug frame size 460 x 290 weight 23 kg
VORTEX 150, 2850 min-1, 230 V Submersible Waste Water Pump with Float Switch
Art. Nr. 165020
Submersible Waste Water Pump with Float Switch flow rate max. litres 450 l/min flow rate max. m³ 27 m³/h max. pressure 1,0 bar Outlet 2" ft (DN 50) Impeller type cast iron, mechanical seal silicon carbide For fluids with solids, free passage max. 50 mm Max. fluid temperature 40 °C Max. fluid density 1100 kg/m³, pH 6-10 Material pump housing cast iron Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 1,1 kW, Rated current (AC) 8,9 A rotation max. 2850 min-1 Material motorshaft stainless steel Protection class IP68 , Insulation class F Motor protection (thermal) yes 10 m cable with plug frame size 520 x 220 mm weight 33 kg
VORTEX 150, 2850 min-1, 400 V Submersible Waste Water Pump without Float Switch
Art. Nr. 165033
Submersible Waste Water Pump without Float Switch flow rate max. litres 450 l/min flow rate max. m³ 27 m³/h max. pressure 1,0 bar Outlet 2" ft (DN 50) Impeller type cast iron, mechanical seal silicon carbide For fluids with solids, free passage max. 50 mm Max. fluid temperature 40 °C Max. fluid density 1100 kg/m³, pH 6-10 Material pump housing cast iron Electric motor Voltage (AC) 400 V, Nominal frequency 50 Hz Nominal power 1,1 kW, Rated current (AC) 3,5 A rotation max. 2850 min-1 Material motorshaft stainless steel Protection class IP68 , Insulation class F 10 m cable with plug frame size 520 x 220 mm weight 33 kg
VORTEX 200, 2850 min-1, 230 V Submersible Waste Water Pump with Float Switch
Art. Nr. 165018
Submersible Waste Water Pump with Float Switch flow rate max. litres 550 l/min flow rate max. m³ 33,0 m³/h max. pressure 1,1 bar Outlet 2" ft (DN 50) Impeller type cast iron, mechanical seal silicium carbide For fluids with solids, free passage max. 50 mm Max. fluid temperature 40 °C Max. fluid density 1100 kg/m³, pH 6-10 Material pump housing cast iron Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 1,5 kW, Rated current (AC) 10 A rotation max. 2850 min-1 Material motorshaft stainless steel Protection class IP68 , Insolation class F Motor protection (thermal) yes 10 m cable with plug frame size 520 x 220 mm weight 34 kg
VORTEX 200, 2850 min-1, 400 V Submersible Waste Water Pump without Float Switch
Art. Nr. 165057
Submersible Waste Water Pump without Float Switch flow rate max. litres 550 l/min flow rate max. m³ 33,0 m³/h max. pressure 1,1 bar Outlet 2" ft (DN 50) Impeller type cast iron, mechanical seal silicium carbide For fluids with solids, free passage max. 50 mm Max. fluid temperature 40 °C Max. fluid density 1100 kg/m³, pH 6-10 Material pump housing cast iron Electric motor Voltage (AC) 400 V, Nominal frequency 50 Hz Nominal power 1,5 kW, Rated current (AC) 5,0 A rotation max. 2850 min-1 Material motorshaft stainless steel Protection class IP68 , Insolation class F 10 m cable without plug frame size 520 x 220 mm weight 34 kg
VORTEX 300, 2850 min-1, 400 V Submersible Waste Water Pump without Float Switch
Art. Nr. 165019
Submersible Waste Water Pump without Float Switch flow rate max. litres 700 l/min flow rate max. m³ 42,0 m³/h max. pressure 1,2 bar Outlet 3" flange (DN 80) Impeller type cast iron, mechanical seal silicium carbide For fluids with solids, free passage max. 55 mm Max. fluid temperature 40 °C Max. fluid density 1100 kg/m³, pH 6-10 Material pump housing cast iron Electric motor Voltage (AC) 400 V, Nominal frequency 50 Hz Nominal power 2,2 kW, Rated current (AC) 5,5 A rotation max. 2850 min-1 Material motorshaft Edelstahl Protection class IP68 , Insolation class F 10 m Kabel, ohne Stecker frame size 525 x 235 mm weight 39 kg On option: Flange kit art. 131255-SET
VORTEX 50, 2850 min-1, 230 V Submersible Waste Water Pump with Float Switch
Art. Nr. 165130
Submersible Waste Water Pump with Float Switch flow rate max. litres 180 l/min flow rate max. m³ 10,8 m³/h max. pressure 0,7 bar Outlet 1 ¼“ ft (DN 32) Impeller type cast iron, mechanical seal in alumina/graphite For waste water with solids, free passage max. 25 mm Max. fluid temperature 40 °C Max fluid density 1100 kg/m³, pH 6-10 Material pump housing cast iron Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,37 kW, Rated current (AC) 3,0 A rotation max. 2850 min-1 Material motorshaft stainless steel Protection class IP68 , Insulation class F Motor protection (thermal) yes 10 m cable with plug frame size 328 x 141 mm weight 11 kg
VORTEX 75, 2850 min-1, 230 V Submersible Pump with fixed Level Regulator
Art. Nr. 165051
Submersible Pump with fixed Level Regulator flow rate max. litres 225 l/min flow rate max. m³ 13,5 m³/h max. pressure 0,8 bar Outlet 1 ¼“ ft (DN 32) Impeller type cast iron, mechanical seal silicon carbide Only for clear water, without solids Max. fluid temperature 40 °C Max. fluid density 1100 kg/m³, pH 6-10 Material pump housing cast iron Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,55 kW, Rated current (AC) 4,2 A rotation max. 2850 min-1 Material motorshaft stainless steel Protection class IP68 , Insulation class F Motor protection (thermal) yes, with automatic reset 10 m cable with plug frame size 280 x 245 mm weight 17 kg
VORTEX 75, 2850 min-1, 230 V Submersible Waste Water Pump with Float Switch
Art. Nr. 1650130
flow rate max. litres 225 l/min flow rate max. m³ 13,5 m³/h max. pressure 0,8 bar Outlet 1 ¼“ ft (DN 32) Impeller type cast iron, mechanical seal in alumina/graphite For waste water with solids, free passage max. 30 mm Max. fluid temperature 40 °C Max. fluid density 1100 kg/m³, pH 6-10 Material pump housing cast iron Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,55 kW, Rated current (AC) 4,2 A rotation max. 2850 min-1 Material motorshaft stainless steel Protection class IP68 , Insolation class F Motor protection (thermal) yes 10 m cable with plug frame size 281 x 220 mm weight 17 kg
Data, Information, Pictures, Descriptions and Dimensions on the complete site are non-binding and follow only the purpose of visualization. All prices are without VAT, packing and transport.
