24/7 Service Hotline      +49 5933 92467-247          

// CHANNEL BALERS WITH WIRE STRAPPING HP 150

Technical Data HP 150

Strapping4-Fold Horizontal
5-Fold Horizontal high-rise format
5-Fold Vertical
5-Fold Vertical + 3-Fold Horizontal
Press force150 tons
Filling opening1000 x 2000 mm
Channel cross-section750 x 1100 mm
Drive power45 - 3 x 75 KW
Bale weight500 - 800 KG
Bale lengthup to 2.000 mm
Machine length13.900 mm
Machine width2.450 mm
Machine heitgh4.250 mm
Machine weightca. 35 Tons

 

Weight capacity depending on bulk weight [theoretically] in tonnes per hour

20 - 30 kg/m³6 - 35
35 - 50 kg/m³10 - 59
60 kg/m³12 - 71
100 kg/m³20 - 118

Options

Geschlossener Kolbenschieber: Europress Lösung für kontrollierte Ballenformung
Piston-Slider

In order to prevent material from entering the lance guide slots while pressing, a hydraulically driven closing plate is mounted on the press plate. This plate closes the needle slots during the pressing stroke and is exclusively opened during the strapping process. This guarantees a work process free from wire tears and diminishes the necessity for cleaning and maintenance intervals.

Geöffneter Bodenschieber: Flexibilität in der Ballenproduktion mit Europress
Bottom-Slider

For closing the bottom during the pressing process so that no material gets into the lance guide slots. Hydraulically driven closure plate installed under the bottom wear plates.

This closes the needle slots in the press floor during the pressing stroke. These needle slots are only opened during the strapping process.

This guarantees a wire-crack-free workflow and low cleaning and maintenance intervals.

Vorpressklappen geschlossen: Europress Lösung für kontrollierte Ballenformung
Prepress Flaps

Two-part side prepress flaps for effective pre-compaction of difficult-to-cut materials.

 

Perforator von Europress: Präzise Durchlöcherung für optimale Ballen
Perforator

Perforator for perforating and squeezing PET bottles, retractable from the side or from the rear.

The perforator is equipped with two drums that rotate in reverse direction shortly after each other and are fitted with over 1000 spikes.

The spikes are aligned in such a way that the bottles are not jammed between them.

Wirbulator von Europress: Präzise Materialverteilung für optimale Ballen
Ruffler

WEP ruffler that can be retracted from behind on a console with a drive power of 22 kW.

This allows smooth surfaces, for example of catalogues, to be broken, so that better compaction is possible. 

Hardox-Innenverkleidung: Materialauskleidung für höchste Ansprüche
Hardox interior trim

10 mm thick inner lining of the entire pressing chamber made of wear-resistant steel in bolted design.

 

KMF-Sonderausstattung: Europress Innovation für spezielle Anforderungen
Special equipment for artificial mineral fibres

Equipment package to equip the channel baler for the pressing of artificial mineral fibres.

 

The perfect equipment

Thanks to various additional functions that allow adaptation to specific challenges, our channel balers with wire strapping in the HP series prove to be particularly versatile and powerful in use. If required, each baler can be equipped with, among other things, a high-speed main cylinder for energy saving or be protected against wear and tear by a Hardox full equipment. Operation by remote control also makes work easier, with the highest possible level of security thanks to the key transfer system fitted as standard. Our HP models are individually equipped to master demanding tasks in waste compaction in a customer-oriented manner.

 

 

Everything and more

With its technically sophisticated but easy-to-use additional functions, the HP series is excellently equipped for applications under difficult conditions or with specific targets that require, for example, variable strapping, a strong reduction in wear or an analysis system for higher safety. Through individual consultation, we always find the right solutions for our customers that fully meet the requirements in waste compaction. As an alternative to the HP series, we provide our customers with the slim standard variant.

  • Pressing force between 100 and 180 tons
  • Stable construction of the base frame
  • Height adjustability of the press shield
  • Piston- and bottom sliders 
  • Cardanic suspension of the main cylinder

 

 

Michael Brinkmann

Sales and Consulting


michael.brinkmann[at]europress-umwelttechnik.de
Tel.: +49 5933 92467-16

Do you have any questions or suggestions? I am at your disposal by phone or by e-mail.

 

Which product groups are you interested in?