cmm BRIDGE | ares

• Ultra-rigid alloy frame to ensure maximum rigidity for scanning applications
• Structure with rapid thermal diffusion for changes in environmental conditions
• FEA-designed bridge girder extrusion, allowing optimal moment of inertia for minimal deflection at high accelerations
• M8 threaded table that fits into the large checkerboard layout.
• Rigid air bearings for high bearing clearance coefficients
• Pneumatic counterbalancing of the Z-axis.
• Free-fluctuation resolution measurement scales of 0.1 micron incorporating dynamic signal processing.
• Fully digital motion control with probe path fusion for optimal performance
• Friction reducers with near-zero hysteresis on all axes
• Passive vibration damping system that isolates external vibrations
• Free access to the measurement area from all sides
• Maximum positioning speed: 517 mm/sec
• Maximum acceleration: 1730 mm/sec2

• Silicon carbide Z-axis column further reinforcing rigidity
• OptionalRenishaw TONiC resolution measurement scalesof 0.1 micron
• Dynamic wireless temperature compensation system including part temperature sensor.

• Temperature rating: 20 °C
• Metrological temperature range: 18 - 22 °C
• Temperature gradient: 0.5 °C/hour - 2 °C/day - 0.5 °C/meter
• Operating temperature range : 15 - 35°C
• Relative humidity: 40 - 80% (without condensation)
• Acceptable vibrations: 30 mm/sec2 1-10 Hz | 15mm/sec2 10-20 Hz | 50 mm/ sec2 20-100 Hz

• Minimum air supply: 5 bar
• Air consumption: 100 Nl/min
• Supply voltage: 230 V 50 Hz or 110 V 60 Hz (+/- 2% single phase)
• Low power consumption: 10 A 1200 W (1600 W on larger models)

Each COORD3 CMM is tested according to UNI EN ISO 10360-2 standards.

ARES 05.05 / 07.05

The indicated performance is valid under the following conditions:
- PH10T/M/PH20-TP20/TP-200: SF module, stylus Ø 4mm x 10mm
- PH6M/PH10M-SP25M: SM1, stylus Ø 5mm x 50mm
- L=measurement length in mm
- Multi-probe temperature compensation (optional)
- Ambient temperature conditions:
_{T1 :} 18÷22°C; Gradients max: 0.5°C/h - 2.0°C/24h - 0.5°C/m
T2: 16÷26°C; Gradients max: 1.0 °C/h - 5.0 °C/24h - 1.0 °C/m

^[1] CMM indication error on dimension measurements according to ISO 10360-2
^[2] Point grip error according to ISO standard 10360-2
^[3] Point grip error on scanning according to ISO 10360-4 for SP25M touch probes.

ARES NT 05.05 / 07.05 / 07.07

The indicated performance is valid under the following conditions:
- PH10T/M/PH20-TP20/TP-200: SF module, stylus Ø 4mm x 10mm
- PH6M/PH10M-SP25M: SM1, stylus Ø 5mm x 50mm
- L=measurement length in mm
- Multi-probe temperature compensation (optional)
- Ambient temperature conditions:
_{T1 :} 18÷22°C; Gradients max: 0.5 °K/h - 2.0 °K/24h - 0.5°K/m
T2 : 16÷26°C; Gradients max: 1.0 °K/h - 5.0 °K/24h - 1.0 °K/m

^[1] CMM indication error on dimension measurements according to ISO 10360-2
^[2] Point grip error according to ISO standard 10360-2
^[3] Point grip error on scanning according to ISO 10360-4 for SP25M touch probes.

• Laser scanning sensor
• Wireless dynamic thermal compensation of the machine and components
• Pneumatic vibration isolation system
• Modular parts locking kit
• Models and dimensions
  COORD3 ARES CMMs are available with the following measuring strokes (X.Y.Z mm):
  7.5.5
  7.7.5 / 10.7.5 / 12.7.5
  7.7.7 / 10.7.7 / 12.7.7