'

Manual positioners

Manual Positioners enable precise motion sequences. Due to the versatile combination options of linear, rotary and swivel axes, multiaxial setups can also be realized.

>

Adjusting screws

Linear stages

XY stages

Elevator stages

Rotation and swivel stages

Twist and tilt stages

Accessories positioners

Do you want more than components and benefit from the plus of a system? Find out more about OWIS Engineering!

Plus with OWIS Engineering

PR 60-D60-BP

  • 3D adjustment: 2 tilting axes and 1 rotation axis
  • fine-thread spindles, with clamping device
  • installation on measuring and translation stages or on optical tables

NT 40

  • angular adjustment range ±6°
  • fine-thread screws or micrometers
  • installation on slide RT 40 and RT 65 or on pin

NT 65

  • angular adjustment range +5,1°/–3,1°
  • fine-thread screws or micrometers
  • installation on slide RT 65, pin or positioner

DNT 40

  • coarse adjustment (360°)
  • fine adjustment with fine-thread screws or micrometers
  • installation on slide RT 40 and RT 65 or on positioner

DTT 100-FGS

  • fine-thread screws
  • 3D adjustment
  • adjustment range of up to ± 12°

FGS 6

  • travel range 3 / 4 / 7.5 / 10 / 12.5 / 15.5 / 18 mm
  • mounting thread M6 x 0.5
  • spindle pitch 0.25 mm / axial load 30 N

FGS 7

  • travel range 7.5 / 10 / 15.5 mm
  • mounting thread M6
  • spindle pitch 0.25 mm / axial load 30 N

FGS 9

  • travel range 17 / 35 mm
  • mounting thread M9 x 0.5
  • spindle pitch 0.35 mm / axial load 50 N

FGS 10

  • travel range 17 / 35 mm
  • mounting thread M10
  • spindle pitch 0.35 mm / axial load 50 N

FGS 15

  • travel range 5 / 7.5 mm
  • mounting thread M6 x 0.5
  • spindle pitch 0.15 mm / axial load 10 N

MS 6

  • measuring range 6 / 12 mm
  • mounting thread M6 x 0.5
  • spindle pitch 0.25 mm / axial load 25 N

MS 9

  • measuring range 10 / 15 mm
  • mounting thread M9 x 0.5
  • spindle pitch 0.25 mm / axial load 30 N

MS 12

  • measuring range 25 / 50 mm
  • mounting thread M12 x 0.5
  • spindle pitch 0.5 mm / axial load 100 N

MS 10

  • accuracy according to DIN 863
  • indication range 12 mm and 15 mm, depending on the type
  • spindle pitch 0.10 mm
  • setting sensitivity about 200 nm per hand, approx. 20 nm with offset screwdriver

MSD 9-15

  • measuring range 0,2 mm (fine) und 15 mm (coarse)
  • mounting thread M9 x 0.5
  • spindle pitch 0.025 mm (fine) and 0.25 mm (coarse) / axial load 15 N

My List

Products Sum
total net 0.00 EUR
plus statutory value added tax 0.00 EUR
total 0.00 EUR
Go To My List